Abnormal growth of austenite grain of low-carbon steel

Niobium is an important alloying element for the steel. To know further the effect of Nb in the steel, the contrast experiments on the austenite grain growth of the 0.015%Nb and free Nb steels were carried out using Gleeble 1500 thermomechanical simulator. The experimental results indicate that the austenite grain of 0.015%Nb steel is finer than that of Nb free steel at 1150–1230 °C. And when the heating temperature arrives the critical temperature 1240 °C, the austenite grain of Nb steel suddenly grows up, while the austenite grain of Nb free steel changes little. Finally, the austenite grain of Nb steel is obviously coarser than that of Nb free steel. By transmission electron microscopy (TEM) using a carbon extraction replica technique, the precipitates of Nb(C,N) were not observed in the 0.015%Nb steel. It is concluded that the grain-boundary internal adsorption of Nb atoms leads to the result.     

Magnet-flux-ing control of interior PM Machine drives for improved steady-state response to short-circuit faults

This paper proposes a control method to the magnet flux in an interior permanent-magnet (IPM) motor following short-circuit-type faults in either the inverter drive or motor stator windings. Phase-based control is employed to implement the flux-ing-control method so that it is possible to take advantage of a zero-sequence current in order to minimize the current in the shorted phase. It is shown that phase-based control results in a smaller induced current than when employing a synchronous-frame dq0 current regulator. The induced torque is also less than that when employing a purposely commanded symmetrical short circuit in response to a short-circuit-type fault. In the paper, the complete magnet-flux-ing-control algorithm is derived with reference to the proposed phase-current-control method. The impact of controlling the zero-sequence current on the resulting phase currents is presented. Both simulation and experimental results are presented, verifying the operation of the proposed methods.     

Low complexity iterative decoding for bit-interleaved coded modulation

Bit-interleaved coded modulation with iterative decoding (ID) is an effective scheme for both AWGN and fading channels because it simultaneously realizes large Euclidean distance and high diversity. In the literature, ID schemes with hard-decision feedback (HDF), as well as soft-decision feedback (SDF), have been investigated. While HDF/ID exhibits a performance inferior to SDF/ID, it is much simpler to implement. To enhance the performance of HDF/ID with moderate additional complexity, we propose a uniform soft-decision feedback ID (USF/ID) scheme. The proposed scheme is applicable in both single antenna and multiple antenna communication systems. The simulation results verify that it achieves impressive performance gain over HDF/ID and has a practically more attractive implementation than SDF/ID, especially for complexity-constrained wireless applications.     

New Application of Stainless Steel

Several rigid substrates such as stainless steel, titanium alloy, aluminum alloy, nickel foil, silicon, and sodium lime glass have been employed for manufacturing high quality TiO2 films by metal organic chemical vapor deposition （MOCVD）. The as-deposited TiO2 films have been characterized with SEM/EDX and XRD. The photocatalytic properties were investigated by decomposition of aqueous orange Ⅱ. UV VIS photospectrometer was employed to check the absorption characteristics and photocatalytic degradation activity. The results show that films synthesized on metal substrates display higher photoactivities than that on absolute substrates such as silicon and glass. It is found that solar light is an alternative to UV-light used for illumination during photodegradation of orange Ⅱ. TiO2 film on stainless steel substrate was regarded as the best one for photocatalysis.     

如何理解微机变压器差动保护中的相角归算

对微机变压器差动保护的原理，阐述个人的理解、观点，并就微机差动保护在试验中应注意的问题提出了一些个人的见解。     

CeO2和La2O3对高炉喷吹煤粉燃烧过程的影响

在模拟高炉喷吹的条件下,对添加CeO2 和La2O3的混合煤粉进行了燃烧试验,考察了稀土氧化物对高炉喷吹煤粉燃烧过程的影响,并探讨了其助燃作用机理.     

旋转管式膜器处理含油废水的研究

用常规方法处理乳化油污水比较困难,存在不同的问题,膜分离技术处理乳化油污水具有分离精度高,无二次污染,过程无相变等优点。     

SiO2对金属锂盐聚合物电解质导电作用的影响

采用溶液浇注法制备了PEO基聚合物电解质,测定了该类电解质的电导率,并研究了温度、SiO2的颗粒度及表面性能对聚环氧乙烯/高氯酸锂(PEO/LiClO4)聚合物电解质体系电导率的影响.结果表明PEO-LiClO4-10%SiO2复合型聚合物电解质的室温电导率达到了1.033×10-4S/cm,同时对该电解质进行了差热分析,发现加入SiO2后,PEO/LiClO4体系熔融温度降低,非晶相含量增加,有利于提高离子电导率.     

英语测试改革初探--英语测试中增加口试的改革实践

从理想的英语测试体系及英语测试现状谈英语测试改革的必要性,从我校英语测试改革实践及成效论在英语测试中增加口试的可行性.     

数据处理常用数表的替代公式

数据处理与统计中查各种系数的数表很不方便,建立了一系列简化公式以替代这些数表.