氧气顶吹转炉吹炼过程动态模型

通过炉气流量和成分的在线采样信息，用积分法计算熔池排出碳量，并根据熔炼体系中碳的守恒，动态推算熔池含碳量，由此来预报吹炼终点。较深入研究了提高炉气流量检测精度的方法，如心平衡修正和钢液成分反馈修正等，并采用了滤波算法，这些措施有利于提高动态模型的精度。     

EXPLO-500T型拖拉机式地震钻机

万程欣,EXPLO-500T型拖拉机式地震钻机．物探装备，2006，16（4）：314-316 EXPLO—500T型拖拉机式地震钻机采用大马力拖拉机底盘、全液压控制，结构紧凑、操作简单、可靠性强、钻井效率高，特别适合林带、丘陵地区施工。     

Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures

Mesoporous alumina layers have attracted attention for their potential use in ultrafiltration of salts, as a heterogeneous catalyst support, an adsorbent in environmental cleanup, and in petroleum refinement. The ability to control the fast hydrolysis rate of the inorganic precursors using simple and inexpensive routes is important for that potential to be realized. Herein, we introduce a novel and facile route to synthesize mesoporous alumina thin films from the combination of inexpensive and commercially available copolymer with aluminum chloride or nitrate (salts) in an EtOH–surfactant–NH₃ · H₂O–salts (EsNs) system through the evaporation-induced self-assembly (EISA) method. Mesoporous alumina layers obtained utilizing the EsNs system have ordered and tunable pore structures. The ability to easily control the mesophases of the alumina layers within a short time provides distinct advantages over previously reported synthesis procedures. Most importantly, we demonstrate that the binding of surfactant and NH₃ · H₂O for the formation of hydrogen bond between them in the EsNs system controls the fast hydrolysis rate of the inorganic species. This allows for the synthesis of nanocrystalline alumina layers via the aluminum oxo-clusters’ assembly with the surfactant. Such simple route may be applied in the synthesis of other non-silica mesostructured oxides.     

直流系统接地探测的微机集散监测系统的开发

文中介绍了根据低频信号变频探测原理和计算机控制技术研制开发的直流系统接地计算机集散监测系统。该系统的开发解决了我国电力系统中直流系统接地点探测长期不能自动监测的难题。     

重金属污染物动态吸附试验及数学模拟

本文采用泥沙动力学中Ｒｏｕｓｅ等人用来研究泥沙浓度沿垂线分布的装置。对泥沙吸附重金属污染物进行了动态模拟。试验分有底泥和无底泥两种情况。研究中发现在Ｒｏｕｓｅ装置的水力、泥沙条件下泥沙吸附重金属污染物达到平衡状态需要６小时以上，由极坐标下的重金属迁移转化数学模型方程，在本文具体试验条件下进行数值求解，计算结果和试验结果合良好，说明数学模型是正确合理的试验是可靠的。计算时依据室内静态试验结果，对动态     

An interactive multiple-response simulation optimization method

This study proposes a new interactive multicriteria method for determining the best levels of the decision variables needed to optimize a stochastic computer simulation with multiple response variables. The method, called the Pairwise Comparison Stochastic Cutting Plane (PCSCP) method, combines good features from interactive multiple objective mathematical programming and response surface methodology. The major characteristics of the PCSCP method are: (1) it interacts progressively with the decision-maker (DM) to obtain her preferences, (2) it uses experimental design to explore the decision space adequately while reducing the burden on the DM, and (3) it uses the preference information provided by the DM and the sampling error in the responses to reduce the decision space. The mechanics of the method are illustrated with a numerical example. Some computational studies evaluating the method are also reported.     

锯齿型螺旋翅片管束传热与阻力性能的分析研究

对气流横掠锯齿型螺旋翅片管管束的对流传热进行了试验研究，并通过了工业试验验证，得出了相应的传热和阻力系数的数学关联式，可供设计计算使用。     

拉西瓦高拱坝岩体力学、工程地质研究成果综述

拉西瓦水电站高拱坝建基岩体工程地质、岩体力学研究是中国水电顾问集团2004年度专题科研成果之一“高混凝土拱坝建基岩体工程地质、岩体力学综合研究”的主要成果,其重点内容为岩体风化、卸荷、岩体质量级别的定量划分、河谷应力场分带、建基岩体主要岩体力学参数研究,坝肩抗滑稳定、开挖后综合检测验证等;在理论探讨、方法实践、预测验证和创新尝试等方面取得了一定成果,具有一定的社会、经济效益。     

MTC技术在百色盆地林逢稠油热采井的研究与应用

针对林逢稠油热采井的地质特点和对固井质量的要求开发了早期强度高,低渗透,微膨胀,抗高温和流变性好的MTC矿渣泥浆固化液,并分析了矿渣泥浆固化液技术的固化机理及特点。结果表明,MTC水泥浆具有低温防水侵,强度发展迅速,固化体耐高温的特性。MTC技术实用性强,施工简单,水泥浆体系流变性好,密度易于控制,它与钻井液有良好的相容性,提高了林逢稠油热采井的固井质量。     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451