Analysis of the time response of multiconductor transmission lineswith frequency-dependent losses by the method ofconvolution-characteristics

A new method for analysis of the time response of multiconductor transmission lines with frequency-dependent losses is presented. This method can solve the time response of various kinds of transmission lines with arbitrary terminal networks. Particularly, it can analyze nonuniform lines with frequency-dependent losses, for which no effective method for analyzing their time response exists. This method starts from the frequency-domain telegrapher's equations. After decoupling and inversely Fourier transforming, then a set of decoupled time-domain equations including convolutions are given. These equations can be solved with the characteristic method. The results obtained with this method are stable and accurate. Two examples are given to illustrate the application of this method to various multiconductor transmission lines     

大气探测红外分光辐射计Ⅱ型模样

报道了大气探测红外分光辐射计Ⅱ型(ASIS-2)模样,它具有20个通道,可以从卫星探测大气温度廓线和水汽垂直分布.它与美国TIROS-N/NOAA气象卫星上的高分辨率红外辐射探测仪(HIRS)相比,在光学、电子学和机械等方面都作了改进.其仪器灵敏度优于HIRS-1仪器,而与HIRS-2接近.它具有可增加2个红外通道和多个可见光通道的潜力.     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

改性双马来酰亚胺的研究

本文研究了双马来酰亚胺与烯丙基化合物形成的改性树脂体系的固化和热性能，讨论了单体配比、增韧剂、催化剂对性能的影响。     

2-乙基己酸的制备

研究了 2乙基己酸的制备 ,该反应是 2乙基己醇与氢氧化钠在催化剂存在下进行氧化、脱氢 ,生成产物2乙基己酸。通过实验找到了一种新型、高效、廉价的催化剂 ,以及最佳反应条件。通过对 2乙基己酸的分析测试 ,产品完全符合质量标准。     

A medium-access control protocol for a cellular packet CDMAcarrying multirate traffic

We propose and evaluate a medium-access control (MAC) protocol for synchronous cellular packet direct-sequence code-division multiple-access (DS/CDMA). The protocol is designed for handling a variety of multimedia traffic types in an integrated wireless-access network (IWAN). For instance, the protocol is suited for carrying multiple traffic types of different priorities. An analytical model for the equilibrium state has been developed for the proposed protocol. A comparative evaluation of the protocol is done for three different radio frequency bandwidths currently under consideration for personal communication services (PCS), i.e., 1.25 MHz, 5 MHz, and 10 MHz. Our results demonstrate that the proposed protocol is both robust and flexible for the intended IWAN applications. It offers a significant multiplexing gain as the bandwidth increases     

Outlier-resistant methods for estimation and model fitting

Least squares is perhaps the most widely used technique for model fitting. In this article, we illustrate the poor performance of least squares when there are spurious values, or outliers, in a sequence of measurements. A brief overview of three well-known classes of robust alternatives to the least-squares mean is presented. For robust regression, a recent proposal called least median squares (LMS) is decribed. LMS regression is compared to least-squares regression in an example involving the estimation of optical fiber geometry. References are provided for software that is available for robust estimation techniques surveyed in this article.     

两种超声清洗槽的声场分布比较

本文作者设计了一种斜底式超声清洗槽，并通过实验研究了它的声场分布，与平底式超声清洗槽相比，这种新型清洗槽深度方向的声场均匀性得么了改善，但水平方向的声场均匀性变化不大。     

真空铸造高强度C/Mg复合材料

本文介绍用真空铸造法制造抗拉强度超过1000MPa的高强度C/Mg复合材料。将T300纤维经C-Si-O梯度涂层处理后单向排布于型腔内,在真空下注入ZM-5合金液,凝固后即得C/Mg复合材料零件或试样。试样的抗拉强度在纤维体积分数为0.35时达1050MPa。本文讨论C-Si-O梯度涂层对获得高强度复合材料的作用。