Al—Si—Mn—Fe合金中相组成的电子衍射鉴定

本文利用选区电子衍射,并结合X射线衍射对六种不同成份的急冷合金及其退火后的相组成进行了鉴定,得到了它们的相组成。     

红外加热胶接技术

提出了红外加热胶接的思想，并对红外加热胶接技术作了简单阐述。介绍了一种红外加热胶接矿用阻燃、防腐、橡塑风筒布的装置。     

我国非调质钢的发展与应用

本文综述了我国非调质钢的研究与应用情况，内容包括显微组织参数、化学成分和热加工参数等对性能的影响及非调质钢的断裂行为、疲劳性能和可切削性。文中比较了非调质钢与调质钢在上述性能方面的差异。     

齿轮磨前滚刀的齿形研究

本文介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。为更加直观起见,还建立了模拟滚齿的数学模型。并在实验的基础上提出了参考标准。     

Releasing N jobs to an unreliable machine

In this paper we develop an algorithm that determines the optimal times of releasing N jobs to an unreliable machine. The job processing times are assumed to be random and the machine is subject to random breakdowns. The objective is to minimize the cost incurred by jobs waiting in the system and utilizing the machine. The job flowtime distributions are first derived from which the average flowtimes and the machine completion time are calculated. Efficient computation of the average flowtimes are discussed in detail. The optimization methods and numerical examples are demonstrated.     

局部剩余偏移与常速叠前偏移成像

如果需要将一个特定局部时空域中的地震反射波归位到它们的实际位置,则我们不必在整个时空域而只需在这个局部时空域对其进行偏移,同样能达到波场归位的目的。其差別仅是采用的速度不同而已.这样能大大地减小偏移的作用区域。采用这种局部偏移的方法进行常速叠前偏移结果的剩余速度偏移,可以完全消除叠前偏移剖面上由于速度变化引起的倾斜反射界面的错断现象。这样在进行叠前偏移时可采用较少的速度个数,减少叠前偏移的计算量。采用该方法作剩余速度偏移可以减少波场成像时的计算量,从而使得常速叠前偏移成为一种处理效果好、处理效率高的实用处理技术。     

废钢在电炉中的高效熔化技术的发展

随着电炉炼钢技术的发展，电炉已成为一种高效的废钢熔化设备，本文从利用初级燃料及电炉废气能的观点出发，对强化电炉冶炼的措施进行了讨论．     

Cr12钢的预处理工艺研究

本文研究了Ｃｒ１２钢经４种不同的预处理工艺处理后钢中碳化物的大小，数量，分布及钢的硬度，强度和韧性，试验结果表明，经调质处理，高温固溶淬火＋高温退火处理后，Ｃｒ１２钢中碳化物的大小，分布及其组织，性能均优于常规球化退火预处理的。通过扫描电镜对冲击断口的分析，初步探讨了新的预处理工艺提高韧性的原因。     

蓄冰空调制冷新技术

文章叙述了中央人民广播电台新业务楼空调工程中采用蓄冰空调制冷新技术的情况。文章讲解了蓄冰空调原理，并对蓄冰制冷与常规制冷技术进行比较，指出：从节电上来考虑，前者具有经济性。文章最后列举了今后在设计和维护上，还有待解决的一些问题。     

A unified model for dislocation nucleation, dislocation emission and dislocation free zone

In this paper, a unified model for dislocation nucleation, emission and dislocation free zone is proposed based on the Peierls framework. Three regions are identified ahead of the crack tip. The emitted dislocations, located away from the crack tip in the form of an inverse pileup, define the plastic zone. Between that zone and the cohesive zone immediately ahead of the crack tip, there is a dislocation free zone. With the stress field and the dislocation density field in the cohesive zone and plastic zone being, respectively, expressed in the first and second Chebyshev polynomial series, and the opening and slip displacements in trigonometric series, a set of nonlinear algebraic equations can be obtained and solved with the Newton-Raphson Method. The results of calculations for pure shearing and combined tension and shear loading after dislocation emission are given in detail. An approximate treatment of the dynamic effects of the dislocation emission is also developed in this paper, and the calculation results are in good agreement with those of molecular dynamics simulations.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids, 4–7 July 1994 in Xi'an, China.