热压变形对灰口铸铁石墨形态的影响

研究了灰口铸铁(HTl50)在900℃大压下量塑性变形后石墨的分布形态，结果表明：随着压下量的增加，石墨片逐渐趋于平行分布；变形过程中发生了碳的回溶，同时伴随着石墨片的断裂；石墨片体积分数及片间距随压下量的增加而逐渐减少。     

湿法磷酸装置三废治理新进展

湿法磷酸装置排放的三废对环境危害较大 ,尤其是废水治理长期以来尚未得到全面控制。阐述了某新建的湿法磷酸装置从工艺流程上通盘考虑 ,采用多次串级利用 ,实现污水全封闭、零排放的流程 ,达到了由清到浊、由冷到热 ,多次利用、自身消化 ,实现平衡、避免污染的目的 ,并介绍了废气和废渣治理的新措施。指出应坚持精心操作和维护 ,巩固已取得的三废治理成果     

有限元方法在离心机转鼓强度分析中的应用

在回顾以往转鼓强度分析的基础上 ,指出了目前转鼓有限元应力分析所存在的问题 ,给出了提高计算精度和保证模拟有效性的注意事项 ,并探讨了转鼓强度评定准则     

2,6-二乙酰基吡啶合成方法的改进

优化了2，6—二乙酰基吡啶的合成工艺。以2，6—吡啶二羧酸为原料，经过醇化及克莱森酯缩合反应，合成了2，6—二乙酰基吡啶，2，6—吡啶二羧酸二乙醇和2，6—二乙酰基吡啶的分离收率分别为94．1％和88．9％，2，6—二乙酰基毗啶的质量分数大于99％。     

Packed-microtubes model for flowthrough chromatography of protein

A mathematical model for flowthrough (perfusion) chromatography, namely packed-microtubes (PMT) model, has been proposed for a column packed with biporous (BiP) anion exchanger in which the mesopores and flowthrough pores are created with liquid and solid porogens, respectively. The model is established based on the assumption that the BiP particle is made up of packed microtubes. Bovine serum albumin (BSA) is used as a model protein and three kinds of anion exchangers (i.e., mesoporous, macroporous and BiP resins) are used as adsorbents to determine the model parameters and to evaluate the model. Adsorption equilibrium and finite bath experiments are performed to determine the adsorption isotherms and kinetics parameters. Both the bound amounts of the protein on the surface of the mesopores and macropores are experimentally determined and taken into account in the mathematical model. With all the model parameters determined by independent experiments or calculated from available correlations, model simulations are performed and compared with the experimentally determined breakthrough profiles of the BiP column. It is found that the model predictions agree reasonably well with the experimental data obtained under various conditions and the PMT model fit experimental data better than the modified double linear driving force (LLDF) model proposed by Leitão and Rodriogues (1999. Biochemical Engineering Journal 3, 131) in which the adsorbent particle is considered to be made up of packed microparticles. The results indicate that the PMT model is more reasonable for this kind of BiP adsorbent.     

Low-Temperature Aging of t-ZrO2 Polycrystals with 3 mol% Y2O3

A kinetic study of the aging behavior of tetragonal zirconia polycrystals (TZPs) from 100° to 500°C suggests that there exists a cricital grain size of 0.52 μm below which the tetragonal symmetry can be retained. Property degradation of TZPs at low temperatures is connected with transformation-induced microcracking. It is reported here that the temperature range of 100° to 400°C in which degradation occurs could be explained by an infinite incubation time for the lower limit and by the martensite starting temperature for the upper limit.     

Security concepts for the dynamics of autonomous vehicle networks

The secure operation of autonomous vehicle networks in the presence of adversarial observation is examined, in the context of a canonical double-integrator-network (DIN) model. Specifically, we study the ability of a sentient adversary to estimate the full network’s state, from noisy local measurements of vehicle motions. Algebraic, spectral, and graphical characterizations are provided, which indicate the critical role of the inter-vehicle communication topology and control scheme in achieving security.     

石油钻采机械用橡胶气囊的研制

橡胶气囊是石油钻采设备上常用的一种刹车装置。介绍了橡胶气囊的模具设计、铜气嘴的处理、排气槽的加工布置等整个研制过程。经试验，生产制作的橡胶气囊完全达到设计要求。     

Propylene epoxidation in a microreactor with electric heating

Gas phase propylene epoxidation on gold catalysts has attracted wide attention from industry and academia due to its high selectivity. However, it suffers from low propylene conversion and rapid catalyst deactivation. Experiments showed that propylene conversion could be increased by raising H₂, O₂, or C₃H₆ concentration in the feed, but the feed compositions were within the explosion limit. It was also shown that the activity of the used catalyst could be fully recovered, but the regeneration temperature was 280 °C, much higher than that for reaction. Therefore a microchannel reactor was devised to suppress explosion and was constructed with Fecralloy, to raise the temperature rapidly for catalyst regeneration by electric heating. In two minutes the temperature of the reactor could be raised from 50 to 300 °C. Catalysts were coated on the alloy belt by dip coating, and the performance of the reactor was evaluated under different operating conditions. Results showed that in the microreactor the overall reaction rate was controlled mainly by the intrinsic reaction rate, and also influenced by film diffusion to a certain extent. The deactivated catalyst was regenerated in the microchannel reactor and the activity was fully recovered.     

Relationship of threshold diameter and Darcean permeability in unconsolidated porous structures

Experiment was conducted on the threshold pressure for atmospheric air through unconsolidated narrow size distributed mini sphere and sand particles at low flow rates. The threshold diameter calculated from measured threshold pressure showed that it does not follow the traditional similarity theory. This is consistent with our experiment on accurate permeability measurement, and can be explained as a result of gas slip flow within such micro pore structure. Our current work tend to find the method to predict the permeability-threshold pressure relationship for unconsolidated porous structures.