基于MAS的分布式制造资源集成系统的动态控制元结构的研究

针对分布式制造资源集成系统的需求和特性,将控制需求分析方法和功能需求分析方法结合起来,提出一种新的控制结构:动态控制元结构,从理论上解决复杂的"人造系统"的构造方法.并以该方法为原则,构建了一个基于MAS的分布式制造系统的控制结构,利用该方法构建的复杂系统,既能满足功能的需要,又使系统具有可控、可观等控制性能,以此来减少构建系统的成本和因反复调试而花费的时间.     

Borides at interfacial zone of IC6 TLP bonded joints

1　INTRODUCTIONTransientliquidphase (TLP)bondingtechniquehasbeensuccessfullyusedinjoiningheatresistantal loys ,likeHastelloyX ,Inconel713C ,In10 0 ,Udimet5 0 0 ,70 0 ,MarM 2 0 0 ,0 0 7,2 4 7,30 2 ,Rene′80 ,TD NiCr ,MA75 4,6 0 0 0 ,PWA14 2 2 ,CSMX 2etc ,whicharesusceptibletohotcrackingor post weldheat treatmentcrackingproblemsduringfusionweld ing[14 ] .Inaddition ,therewerereportsofjoiningNiAlandTiAlintermetallicsbyTLPbondingmethod[510 ] .Forexample ,Galehadinvestigatedthemic…     

3300mm轧机辊缝位置控制系统的研制

介绍3300mm中厚板可逆热轧机辊缝调整机构的组成,设计了3300mm轧机辊缝位置控制系统控制方案,给出了该方案中压下电机调速系统的设计过程,最终依据设计方案研制了辊缝控制系统,并在实际生产中运行使用。现场运行结果表明,用有准备切换逻辑无环流控制系统控制压下电机的辊缝位置,性能稳定,定位迅速,控制精度达到±0.3mm。宝钛集团使用该设备生产的钛及钛合金中厚板、镍板、锆及锆合金板等质量达到国际同类产品的先进水平。     

再谈高速走丝线切割机断丝原因的分析及对策

针对高速走丝电火花线切割加工的断丝问题，从各个方面补充分析了线切割加工中的断丝原因及解决方法，这些方法能切实有效地减少断丝的发生。     

纳米晶Fe72.8Cu1Nb1.7V1.5Mn0.5Si13.5B9软磁合金的磁性能

本文报道了高导磁纳米晶Fe72．8Cu1Nb1．7V1．5Mn0．5Si13．5B9合金的直流和交流磁性能水平，磁导率频散行为以及高频铁损行为，给出了描述高频区频散行为和铁损行为的近似表达式。     

倾斜冷却体法制备半固态浆料的研究现状

介绍了低成本、高效率的倾斜冷却体法制备半固态浆料的方法，综述了国内外对该方法的研究现状、相关工艺参数对组织形貌的影响及需要解决的关键问题。     

Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings

Expandable graphite (EG) coating and ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating were prepared. Thermal degradation and char formation of the coatings were investigated by differential thermal analysis (DTA), thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results have shown that the anti-oxidation and fire-resistant properties of expandable graphite coating containing EG with size of 74 μm are better than those of APP-PER-MEL coating. The static immersion test was applied to study water resistance of the coatings, and the fire protection test and mechanical test were used to analyse heat insulation and mechanical properties of coatings before and after water immersion. The fire-resistant and mechanical properties of APP-PER-MEL coating were severely damaged by water immersion, whereas EG coating containing 8.5% EG with size of 74 μm could retain the good fire resistance even after 500 h water immersion.     

基体碳对C/CF/Cu复合材料的影响

采用树脂碳化和碳气相沉积相结合的方法制备了碳/碳纤维(C/CF)先驱丝,用压力浸渗凝固成型方法制备了碳/碳纤维/铜(C/CF/Cu)复合材料,借助于扫描电镜下复合材料界面和相分布观察以及显微硬度和滑动摩擦磨损测试,探讨了基体碳(树脂碳化碳和沉积碳)对C/CF/Cu复合材料成型、显微硬度及摩擦磨损的影响.结果表明,碳化和碳气相沉积处理的C/CF先驱丝相对致密并阻碍铜液的压力浸渗成型,但该先驱丝硬度高于碳化处理的C/CF先驱丝.碳化和碳气相沉积处理的C/CF/Cu复合材料滑动摩擦磨损耐磨性高于纯铜,而且滑动摩擦系数也高于纯铜.C/CF/Cu复合材料是一种具有摩阻功能的复合材料.     

Model of intense pulsed ion beam and simulation study of energy deposited on target

Gaussian type models have been established according to the real detected voltage of magnetically insulated ion diode and intense pulsed ion beam density near the focus of the diode. The energy deposition of Al target irradiated by intense pulsed ion beam has been simulated by Monte Carlo method based on these models. The results of energy depositions of the irradiation of single energy ions and the Gaussian distribution IPIB have been obtained. Especially cases of ion beam irradiating Al target at different angles on one dimension and two dimensions are discussed. The evolution processes of the energy deposition of ions in target have been simulated during a pulse. In addition, incident angles of H⁺ ions and C⁺ ions ranging from 20 to 40° have been researched. We obtained the conclusions that C⁺ ions of the beam affect the physical properties of near surface region, but H⁺ ions affect the deeper layer. The energy of intense pulsed ion beam mainly deposits on target surface, so melting and evaporation begin both from target surface.     

Application of an analytical phase transformation model

Employing isothermal and isochronal differential scanning calorimetry, an analytical phase transformation model was used to study the kinetics of crystallization of amorphous Mg82.3Cu17.7 and Pd40Cu30P20Ni10 alloys. The analytical model comprised different combinations of various nucleation and growth mechanisms for a single transformation. Applying different combinations of nucleation and growth mechanisms, the nucleation and growth modes and the corresponding kinetic and thermodynamic parameters, have been determined. The influence of isothermal pre-annealing on subsequent isochronal crystallization kinetics with the increase of pre-annealing can be analyzed. The results show that the changes of the growth exponent, n, and the effective overall activation energy Q, occurring as function of the degree of transformation, do not necessarily imply a change of nucleation and growth mechanisms, i.e. such changes can occur while the transformation is isokinetic.