Structural characterisation of apatite coatings

The current, most frequently employed, commercial route to produce hydroxyapatite prosthetic coatings is plasma spraying. However, this has several important limitations especially for textured surfaces. Low temperature methods of coating fabrication such as cathodic electrodeposition are attractive alternatives. However, quantitative characterisation of the phase composition of thin electrodeposited coatings can be problematic. An X-ray diffraction method, which provides quantitative compositional information without reference to external or internal standards, is introduced and validated. The method can also be applied when Bragg peaks from the supporting substrate are apparent within the data and preferred orientation can be tolerated. This method has been used to examine in detail the microstructure of electrodeposited coatings which are compared directly with those formed by a commercial plasma spraying process.We show that, unlike the plasma sprayed coatings, the electrodeposited material consists of a single crystalline phase (hydroxyapatite) and a significantly reduced amorphous phase. The electrodeposited coatings also possess significantly more microstrain and a smaller crystallite size than the corresponding plasma sprayed material.     

The hypersonic environment: Required operating conditions and design challenges

Hypersonic flight powered by airbreathing engines offers the potential for faster response time at long ranges, and reduced cost for access-to-space. In the present paper the operating environment of typical hypersonic vehicles are discussed, including results for the radiation equilibrium wall temperature of external vehicle surfaces and the flow properties through three sample engines spanning the range of hydrocarbon-fueled Mach 4-8 flight and hydrogen-fueled flight at speeds up to Mach 17. Flow conditions at several locations through the sample engines were calculated to provide indications of the required operating flow environment. Additional system consideration such a seals, joints, vehicle integration and in-service engineering are addressed.     

Electrophoretic deposition of monochrome and color phosphor screens for information displays

This paper reviews our research on the electrophoretic deposition (EPD) of phosphors for the processing of monochromatic and color screens for information displays. Our investigation began with the study of the fundamentals of the EPD process for phosphors. The processing variables which enhance the adhesion strength of phosphor deposits were determined. The optical performance of phosphors deposited by EPD was shown to be not affected by the process itself nor by the conditions which enhance phosphor adhesion. Processes developed to produce high-resolution color screens by combining EPD and photolithography techniques are described. Also, a method to electrophoretically deposit phosphor in a thermo-reversible gel from mixtures of poly(butyl methacrylate) and isopropanol was examined.     

Sensors for chemicals based on electrically conductive immiscible HIPS/TPU blends containing carbon black

Carbon Black (CB)-containing immiscible polymer blends based on high-impact polystyrene/thermoplastic polyurethane (HIPS/TPU) were studied as sensing materials for an homologous series of alcohols, including, methanol, ethanol and 1-propanol. The studied immiscible blend was designed to exhibit a double-continuity structure i.e., the CB particles form chain-like network structures within the TPU phase, which forms a continuous phase within the HIPS matrix. Extruded HIPS/TPU/CB filaments produced by a capillary rheometer process at various shear rate levels were used for the sensing experiments. All filaments displayed a selective resistance changes upon exposure to the various alcohols combined with reproducibility and recovery behaviour. An attempt is made to identify the dominant mechanisms controlling the sensing process in a CB-containing immiscible polymer blend characterized by a double-continuity structure. The distinct structure and composition of the HIPS/TPU interphase region were found to have a crucial role in the sensing mechanism, determining the selectivity of the filaments toward the studied alcohols. Additionally, the sensing performance of HIPS/TPU/CB system is compared to recent results for TPU/CB compounds, polypropylene/TPU/CB and HIPS/ethylene vinyl acetate/CB immiscible polymer blends.     

An in situ TEM study of phase formation in gold-aluminum couples

In the gold wire bonding of aluminum in microelectronic devices the presence of aluminum oxide on the metallization surface may be expected. Electron transparent couples containing an oxide layer at the interface were heated in a TEM to determine the effects of a passivation layer on intermetallic formation. Intermetallic phases were evidenced by changes in sample appearance and their structure was determined by electron diffraction. The presence of an oxide at the interface hindered second phase formation at temperatures at which they were usually expected to form. In aluminum rich couples, the formation of the AuAl₂ intermetallic was not observed to form until about 350°C with the oxide present. In a reverse configuration involving a gold rich couple, an amorphous oxide phase was observed between the Al and the advancing Au₂Al front. The movement of the reaction front appeared to be controlled by surface diffusion across this phase.     

Feasibility study of absolute activity measurement with metallic magnetic microcalorimeters

We report on a feasibility study on precise determination of mass-specific activity of low-energy emitting radioisotopes. Conventional methods of activity measurement suffer from source self-absorption and a strong decrease in detection efficiency for low-energy electrons and photons. We propose a new method based on metallic magnetic microcalorimeters with the source embedded in the detector target in a 4π geometry. First results with a ⁵⁵Fe source show that electrons and photons are detected with a detection efficiency close to unity and with little loss of energy for electrons. The aim of this study is to provide standards of activity with very low uncertainties in the framework of radiation metrology.     

Synthesis and Properties of NdMCr2O5 (M = Na, K, Cs) and NdMgCr2O5.5 Chromites

NdMCr₂O₅ (M = Na, K, Cs) and NdMgCr₂O_5.5 are prepared by solid-state reactions between appropriate oxides and carbonates and are shown to have a tetragonal structure. The heat capacity of these chromites, measured from 298.15 to 673 K, exhibits sharp changes attributable to second-order phase transitions. The C _p ⁰(T) data are represented by quadratic best fit equations. The electrical resistivity of the chromites is measured between 303 and 493 K. The results attest to semiconducting behavior of the materials in certain temperature ranges.