Four experiments familiarized 6-, 9-, 12-, and 16-month-old infants to a solid block that was repeatedly lowered into a semitransparent container. In test trials the end state, containment, was either compatible or incompatible with the objects' size and position. In Experiment 1, infants saw the block and box successively before they observed the end state. This forced infants to attend to each object individually and memorize its size and position while observing the end state. In Experiments 2 and 3, the block and container were shown simultaneously, the block suspended above the container at a distance of either 25 cm (Experiment 2) or 2 cm (Experiment 3). The shorter distance made direct comparison easier to perform. In Experiment 4, the full event was shown in which the block was lowered inside the container from a distance of 25 cm. Infants' perception of containment was related to the visual information that was available. When the event made it easier to grasp the relevant information, infants could perceive whether the block could pass in the container at a progressively younger age. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
The influence of pH of a chromate bath on the morphological and chemical properties of a chromate conversion coating, formed on Alclad 2024-T3 aluminum alloy, has been investigated by variable angle spectroscopic ellipsometry in the visible and infra-red regions. Other techniques such as glow discharge optical emission spectroscopy, transmission and scanning electron microscopy, atomic force microscopy and Auger electron spectroscopy have been used in order to confirm and sustain the results obtained with this technique. The combination of different analytical methods showed a decrease in thickness together with changes in the morphology and chemical composition of the chromate film when the pH is increased from 1.2 to 2.4. Although the complexity of the chromate system and the pronounced roughness of commercial rolled aluminum limit the accuracy of spectroscopic ellipsometry, it is demonstrated that this technique can be usefully applied to the study of thin chromate films formed on industrially relevant aluminum products. 相似文献
A 59-year-old patient who presented with hematuria and recurrent soft tissue bleeding was found to have a factor VIII inhibitor level of 52 Bethesda units (BU)/ml and acquired hemophilia was diagnosed. After treatment with immunoglobulins (0.4 g IgG/kg per day for one week) the factor VIII inhibitor titer decreased to 12 BU/ml. Because of another episode of retroperitoneal hemorrhage, the patient was put on an immunosuppressive combination therapy which was first described by Lian et al. (1988). Our patient was infused with a factor VIII concentrate followed by cyclophosphamide, vincristine and prednisone. This regimen was repeated every 3-4 weeks. After 6 courses a further decline in the factor VIII inhibitor concentration, but no complete eradication of the autoantibody, was achieved. The factor VIII inhibitor level has remained at 2.5 BU/ml for more than 7 weeks without further bleeding episodes. The pathophysiology and treatment of acquired hemophilia are discussed. 相似文献
Wiener kernel analysis was used to characterize the auditory pathway from tympanic membrane to single primary auditory nerve fibers in the European edible frog, Rana esculenta. Nerve fiber signals were recorded in response to white Gaussian noise. By cross-correlating the noise stimulus and the nerve fiber response, we computed (1) the full second-order Wiener kernel, and (2) the diagonals of the zeroth- to fourth-order Wiener kernels. These diagonals are usually referred to as polynomial correlation functions. The measured Wiener kernels were fitted with a 'sandwich' model. A new fitting procedure was used to compute the response characteristics of (1) the first filter, (2) the static nonlinearity, and (3) the second filter, which form the functional components of the model. The first filter is a bandpass filter. In the majority of low frequency fibers, with best excitatory frequency (BEF) < 800 Hz, this filter was tuned to two frequencies. This dual tuning mechanism gives rise to 'off-diagonal' components in the second-order Wiener kernel. The static nonlinearity resembles a rectifier, and is dominated by second-order (quadratic) nonlinearity. As a function of BEF, the shape of the nonlinearity changes systematically. Finally, the last filter in the model was a low pass filter. Across fibers, its cutoff frequency f-3dB ranged from 106 to 434 Hz. 相似文献
Two different methods were followed to improve the adhesion and durability of the adhesion of a commonly used epoxy coating on an aluminium substrate. The first method was by application of a thin polymeric layer, having a thickness of around 10 nm, on the aluminium substrate prior to application of the epoxy coating. The functional groups in the polymers were chosen so as to be capable of chemisorption to the oxide surface and should also to be capable of being involved in the curing reaction of the epoxy resin. These polymers were poly(acrylic acid) (PAA), poly(ethylene-alt-maleic anhydride) (PEMah) and poly(vinyl phosphonic acid) (PvPA). An investigation of the interphasial region between the epoxy coating and the aluminium substrate in the final cured system showed that the polymeric layers were indeed involved in the curing reaction with the epoxy.
For the poly(ethylene-alt-maleic anhydride)-based system, this resulted in the formation of a cured, mixed poly(ethylene-alt-maleic anhydride)/epoxy interphasial region between coating and substrate while for the two other polymers, a weakly cured interphasial region was formed. The second method of adhesion and durability improvement was by hydration of the aluminium substrates, performed by immersion in boiling water. This procedure results in the formation of a porous pseudoboehmite oxyhydroxide layer. The epoxy coating was found to be capable of fully penetrating into the layer. The adhesion of the epoxy coatings was tested initially and after exposure to 40 °C water and 40 °C 5% acetic acid. The poly(ethylene-alt-maleic anhydride)-based system resulted in a very good initial adhesion and durability in presence of water for the epoxy coating, while the systems based on the other two polymers did not. The pseudoboehmite-based system also resulted in very good initial adhesion and durability in the presence of water. None of the improved systems were, however, found to be able to withstand 40 °C 5% acetic acid and showed severe corrosion underneath the epoxy coating. 相似文献
The influence of drying temperature on the corrosion performance of chromate coatings on electro‐galvanized (EG) steel has been investigated using electrochemical impedance spectroscopy (EIS) and potentiodynamic measurements in 3.5% NaCl solutions. The chromate coatings were applied to the EG steel in a solution (pH 1.2) containing sodium dichromate and sulfuric acid at room temperature. The coatings were dried in an oven at three different temperatures: 60, 110 and 210°C. The surface of the chromate coatings was analyzed using atomic force microscopy (AFM) and scanning electron microscopy (SEM) combined with energy‐dispersive spectrometry (EDS). The results show that the drying temperature significantly affects the morphology of the chromate coatings and consequently affects their corrosion behavior. The chromate coatings dried at 110°C had few cracks and the lowest corrosion current. The chromate coatings dried at 60°C showed passivity. The EIS results show that the chromate coatings dried at 60°C has the largest impedance in a neutral 3.5% NaCl solution. Drying at higher temperature (210°C) degrades the chromate coatings by widening the cracks and reducing soluble Cr(VI) in the chromate layer. The favorable drying temperature for the chromate coatings on the EG steel is between 60 and 110°C. 相似文献
Metastatic breast cancer is still an incurable disease. Standard hormonal and chemotherapeutic treatment modalities yield at the best a survival advantage of 1 to 2 years. However, palliation is still the second, very important goal of treatment for metastatic disease. First-line chemotherapeutic treatment with an anthracycline-containing regimen induces a response in about half the patients. In second-line treatment docetaxel is an effective agent even in patients failing first-line therapy with an anthracycline-containing regimen. There is no effective standard third-line chemotherapy scheme. 相似文献
OBJECTIVE: To investigate the relationship between exposure to antiretroviral drugs and the initial decline of plasma HIV-1 RNA. DESIGN: Open-label study in antiretroviral-naive HIV-1 infected patients using a quadruple drug regimen [nelfinavir (NFV), saquinavir (SQV), stavudine, and lamivudine]. METHODS: The elimination rate constant (k) for HIV-1 clearance was calculated during the first 2 weeks of treatment in 29 patients. Exposure to NFV and SQV was quantified on each study visit. Observed NFV and SQV concentrations were related to those expected in a reference population and a concentration ratio was calculated. The median concentration ratios for NFV and SQV, the baseline CD4+ lymphocyte count and baseline log10 HIV-1 RNA were correlated with k. RESULTS: A significant positive correlation was observed between k and the median NFV (P = 0.001) or SQV concentration ratio (P = 0.016) in univariate analysis. In multivariate analyses, the median NFV concentration ratio remained significantly correlated with k. CONCLUSIONS: The variation in the rate of decline of plasma HIV-1 RNA between patients after the initiation of a quadruple drug regimen could be explained by differences in exposure to NFV or SQV. Determination of k could be used to optimise further antiretroviral drug therapy and may be a first tool to assess antiretroviral activities of new or increasing doses of drugs administered in combination regimens. Furthermore, our data suggest that exposure to antiretroviral drugs should be incorporated in mathematical models to describe HIV-1 dynamics in more detail. 相似文献
The electrodeposition of Zn-Co alloys from chloride electrolytes was studied on steel substrate. Electrodeposition of Zn-Co alloys is usually divided into two potential regions, i.e. normal (positive to Zn deposition potential versus SCE) and anomalous (negative to ). In order to elucidate the deposition mechanism a complementary approach was used based on the combination of various electrochemical techniques. The morphology of the deposits and elemental composition analysis were determined by using SEM/EDX. It was found that the presence of Zn2+ in electrolyte inhibited Co2+ and H+ reductions in normal region. A critical potential was also noticed in the so-called normal deposition range above which a Co-enriched phase of Co-Zn alloy was favored and below that a severe mitigation to deposition occurred that was considered due to underpotential deposition (UPD) of Zn on the substrate and on active Co sites at either nucleation or growth stage. Beyond the deposition is considered anomalous due to the fact that Zn deposits preferentially compared to the more noble Co. This anomalism was explained by the faster deposition kinetics of Zn as compared to Co on steel and could be overcome by either increasing the Co2+/Zn2+ ratios in the electrolyte or by carrying out the deposition at higher temperature. 相似文献