Capacitively coupled transmission line pulsing cc-TLP––a traceable and reproducible stress method in the CDM-domain

This paper describes a new test method called capacitively coupled transmission line pulsing cc-TLP. It is applied to different test circuits which were mounted on specially designed package emulators with a defined background capacitance. The test results are compared with the ESD thresholds obtained by CDM tests. The cc-TLP results correlate well with the CDM data.     

ATM‐based wireless broadband access in the local loop

Broadband networks using wireless transmission techniques are a quick and flexible means of implementing subscriber access. Unoccupied frequency bands with sufficient bandwidth to allow the transmission of digital signals at very high bit rates are found only in the microwave bands. Because the path loss is fairly high at these frequencies, the diameter of radio cells is limited to a maximum of a few kilometres. This results in a microcellular system, which is best implemented in the form of a point‐to‐multipoint system, where one radio‐base station serves all subscribers registered in that radio cell. An interactive, broadband, ATM‐based radio local loop has undergone successful trials in Munich. Copyright © 2001 John Wiley & Sons, Ltd.     

Lyso platelet activating factor (LysoPAF) and its enantiomer. Total synthesis and carbon-13 NMR spectroscopy

Described is a reaction sequence for the total synthesis of lyso platelet activating factor (lysoPAF; 1-O-alkyl-sn-glycero-3-phosphocholine) and its enantiomer. The procedure is versatile and yields optically pure isomers of defined chain length. The synthesis is equally suited for the preparation of lysoPAF analogues and its enantiomers with unsaturation in the long aliphatic chain. First,rac-1(3)-O-alkylglycerol is prepared by alkylation ofrac-isopropylideneglycerol with alkyl methanesulfonate followed by acid-catalyzed removal of the ketal group. The primary hydroxy group of alkylglycerol is then protected by tritylation, the secondary hydroxy group is acylated, and the protective trityl group is removed under mild acidic conditions with boric acid on silicic acid, essentially without acyl migration. Condensation of the diradylglycerol with bromoethyl dichlorophosphate in diethyl ether, hydrolysis of the resulting chloride, and nucleophilic displacement of the bromine with trimethylamine givesrac-1-O-alkyl-2-acylglycero-3-phosphocholine in good overall yield. The racemic alkylacylglycerophosphocholine is finally treated with snake venom phospholipase A₂ (Ophiophagus hannah) which affords 1-O-alkyl-sn-glycero-3-phosphocholine (lysoPAF) of natural configuration in optically pure form. The “unnatural” 3-O-alkyl-2-O-acyl-sn-glycerol-1-phosphocholine enantiomer, which is not susceptible to phospholipase A₂ cleavage, gives 3-O-alkyl-sn-glycero-1-phosphocholine upon deacylation with methanolic sodium hydroxide. Homogeneity and structure of the intermediates and final products were ascertained by carbon-13 nuclear magnetic resonance spectroscopy on monomeric solutions.     

Engineering a heavy atom derivative for the X-ray structure analysis of cyclodextrin glycosyltransferase

Based on a preliminary structural model of cyclodextrin glycosyltransferasefrom Bacillus circulans (EC 2.4.1.19 [EC] ), Ser428 and Ser475 ofthe enzyme were mutated to cysteines in order to produce suitableheavy atom derivatives. Mutant Ser475 - Cys could not be expressedas protein. Mutant Ser428 - Cys was expressed in Escherichiacoli and purified. It crystallized isomorphously and gave riseto a mercury derivative that improved the electron density map.The structural results show that the new mercury-binding siteis in a pocket at the protein surface.     

In Situ Tensile Measurements of Single Fibers by Scanning Electron Microscopy

A newly developed tensile module allows tensile experiments of single fibers to be carried out under visual observation in the scanning electron microscope. This allows correlation of measured data with observed changes in the microstructure, such as surface irregularities and crack formation. With point heating, the thermal behavior of the fibers may be studied up to 2500°C. The results are presented with tensile elongation recordings and micrograph sequences of the structural changes. Carbon fibers with and without an aluminum coating were selected as testing specimens.     

Feststoffbildung durch Kristallisation und Fällung

Formation of solids by crystallization and precipitation. Formation of solids from solutions can take place by crystallization or precipitation. The principal factor is the relationship between solubility and supersaturation. In crystallization, the solubility of the crystallising substance is so high that the formation of solids occurs largely in the metastable zone in the immediate vicinity of the solubility limits. Crystal growth and nucleation are functions of supersaturation. If a high supersaturation is required at low substance-specific growth rates for an adequate crystal growth, high nucleation rates and hence small crystals will result. On this basis, the authors present information for the specific design of crystallization processes. In contrast, the solubility of the precipitated product must be very low for precipitation. Direct crystal formation is possible only for substance systems of high solubility. As a rule, however, the precipitated substance is so insoluble that solids are formed via amorphous intermediates. The results of a large number of experiments show the influence of various parameters of the precipitation process on the filtrability of the precipitated product.     

Multifunktionales Batteriespeichersystem

In the national research project “Multifunctional Battery Storage System (MBS)” open questions were answered concerning the technical feasibility and profitability of a grid-connected battery storage system using a vanadium-redox-flow battery in combination with the renewable power generation plants PV and small wind power (Sterrer et al., Multifunktionales Batteriespeichersystem—MBS-Endbericht. Industrielle Forschung im Rahmen der österreichischen Programmlinie Neue Energie 2020, 3. Ausschreibung, noch nicht veröffentlicht, 2013). The technical implementation and the demonstration operation of the pilot plant over a period of two years showed that the battery storage system is suitable for intelligent marketing of renewable energy as well as the provision of system services for grid stabilisation. However, the investigation of different operating strategies of the pilot battery-storage system, a large scale storage system and pooled PV/battery storage systems as virtual power plant for the participation at the energy trading market and energy reserve market showed that all operation strategies being considered in this study may not be profitable in foreseeable future. However, if the costs of the battery storage system can be reduced to about 250 €/kWh until the year 2030, the application of the vanadium-redox-flow battery in particular in large-scale storage plants (e.g. 10 MW, 100 MWh) for the participation at the energy reserve market seems realistic.     

Finding Quadratic Schedules for Affine Recurrence Equations Via Nonsmooth Optimization

Frequently, affine recurrence equations can be scheduled more efficiently by quadratic scheduling functions than by linear scheduling functions. In this paper, the problem of finding optimal quadratic schedules for affine recurrence equations is formulated as a convex nonsmooth programming problem. In particular, sufficient constraints for causality are used generalizing Lamport's condition. In this way, the presented problem formulation becomes independent of the problem size. The research tool AQUAD is described implementing this problem formulation. Several nontrivial examples demonstrate that AQUAD can be effectively used to calculate quadratic schedules for affine recurrence equations. Finally, it is shown how array processors can be synthesized from affine recurrence equations which are scheduled by quadratic functions with a singular Hessian matrix.     

Multiview deblurring for 3-D images from light-sheet-based fluorescence microscopy

We propose an algorithm for 3-D multiview deblurring using spatially variant point spread functions (PSFs). The algorithm is applied to multiview reconstruction of volumetric microscopy images. It includes registration and estimation of the PSFs using irregularly placed point markers (beads). We formulate multiview deblurring as an energy minimization problem subject to L1-regularization. Optimization is based on the regularized Lucy-Richardson algorithm, which we extend to deal with our more general model. The model parameters are chosen in a profound way by optimizing them on a realistic training set. We quantitatively and qualitatively compare with existing methods and show that our method provides better signal-to-noise ratio and increases the resolution of the reconstructed images.