Capacitively coupled transmission line pulsing cc-TLP––a traceable and reproducible stress method in the CDM-domain

This paper describes a new test method called capacitively coupled transmission line pulsing cc-TLP. It is applied to different test circuits which were mounted on specially designed package emulators with a defined background capacitance. The test results are compared with the ESD thresholds obtained by CDM tests. The cc-TLP results correlate well with the CDM data.     

Covalent Adaptable Microstructures via Combining Two-Photon Laser Printing and Alkoxyamine Chemistry: Toward Living 3D Microstructures

Manufacturing programmable materials, whose mechanical properties can be adapted on demand, is highly desired for their application in areas ranging from robotics, to biomedicine, or microfluidics. Herein, the inclusion of dynamic and living bonds, such as alkoxyamines, in a printable formulation suitable for two-photon 3D laser printing is exploited. On one hand, taking advantage of the dynamic covalent character of alkoxyamines, the nitroxide exchange reaction is investigated. As a consequence, a reduction of the Young´s Modulus by 50%, is measured by nanoindentation. On the other hand, due to its “living” characteristic, the chain extension becomes possible via nitroxide mediated polymerization. In particular, living nitroxide mediated polymerization of styrene results not only in a dramatic increase of the volume (≈8 times) of the 3D printed microstructure but also an increase of the Young's Modulus by two orders of magnitude (from 14 MPa to 2.7 GPa), while maintaining the shape including fine structural details. Thus, the approach introduces a new dimension by enabling to create microstructures with dynamically tunable size and mechanical properties.     

ATM‐based wireless broadband access in the local loop

Broadband networks using wireless transmission techniques are a quick and flexible means of implementing subscriber access. Unoccupied frequency bands with sufficient bandwidth to allow the transmission of digital signals at very high bit rates are found only in the microwave bands. Because the path loss is fairly high at these frequencies, the diameter of radio cells is limited to a maximum of a few kilometres. This results in a microcellular system, which is best implemented in the form of a point‐to‐multipoint system, where one radio‐base station serves all subscribers registered in that radio cell. An interactive, broadband, ATM‐based radio local loop has undergone successful trials in Munich. Copyright © 2001 John Wiley & Sons, Ltd.     

Personal Trusted Devices for Web Services: Revisiting Multilevel Security

In this paper we revisit the concept of mandatory access control and investigate its potential with personal digital assistants (PDA). Only if applications are clearly separated and Trojans cannot leak personal information can these PDAs become personal trusted devices. Limited processing power and memory can be overcome by using Web services instead of full-fledged applications – a trend also in non-mobile computing. Web services, however, introduce additional security risks, some of them specific for mobile users. We propose an identification scheme that can be effectively used to protect privacy and show how this system builds upon a light-weight version of mandatory access control.     

Glyphosate Adsorption from Water Using Hierarchically Porous Metal–Organic Frameworks

The selective removal of one ligand in mixed-ligand MOFs upon thermolysis provides a powerful strategy to introduce additional mesopores without affecting the overall MOF structure. By varying the initial ligand ratio, MOFs of the MIL-125-Ti family with two distinct hierarchical pore architectures are synthesized, resembling either large cavities or branching fractures. The performance of the resulting hierarchically porous MOFs is evaluated toward the adsorptive removal of glyphosate (N-(phosphonomethyl)glycine) from water, and the adsorption kinetics and mechanism are examined. Due to their strong affinity for phosphoric groups, the numerous Ti–OH groups resulting from the selective ligand removal act as natural anchor points for effective glyphosate uptake. The relationships between contact duration, glyphosate concentration, and adsorbent dosage are investigated, and the impact of these parameters on the effectiveness of glyphosate removal from contaminated water samples is examined. The introduction of additional mesopores has increased the adsorption capacities by nearly 3 times with record values exceeding 440.9 mg g⁻¹, which ranks these MOFs among the best-reported adsorbents.     

A parallel algorithm evaluating the reliability of a system with known minimal cuts (paths)

A system with known minimal cuts is considered. In order to compute its reliability a binary tree is constructed with nodes being assigned numerical values. The value of each non-leaf node is a linear combination of its child nodes' values. The values of leaf nodes can be computed in a very simple way. The value of the root node is the system's reliability. The presented method is a memory saving one. Moreover, it is possible to apply parallel computation to the nodes located on the same level, which may significantly reduce the computing time.     

Reliability of a two-way circular consecutively connected system with multistate components

A two-way circular consecutively connected system with multistate components (two-way circular CCSMC) consists of n cyclically ordered components e₁,…,e_n, i.e. e_i+1, succeeds e₁, iε«ng l, …, n − 1ång;, e, succeeds e_n- Each component is capable of sending a signal in left-hand and right-hand directions. All components operate independently. The whole system is functioning if both left-hand and right-hand signals are received by each component. A recursive procedure evaluating the reliability of a two-way circular CCSMC is presented.     

An integrated 8-12 GHz fractional-N frequency synthesizer in SiGe BiCMOS for satellite communications

We present an integrated fractional-N low-noise frequency synthesizer for satellite applications. By using two integrated VCOs and combining digital and analog tuning techniques, a PLL lock range from 8 to 12 GHz is achieved. Due to a small VCO fine tuning gain and optimized charge pump output biasing, the phase noise is low and almost constant over the tuning range. All 16 sub-bands show a tuning range above 900 MHz each, allowing temperature compensation without sub-band switching. This makes the synthesizer robust against variations of the device parameters with process, supply voltage, temperature and aging. The measured phase noise is ?87 dBc/Hz and ?106 dBc/Hz at 10 kHz and 1 MHz offset, respectively. In integer-N mode, phase noise values down to ?98 dBc/Hz at 10 kHz and ?111 dBc/Hz at 1 MHz offset, respectively, were measured.     

Molecular Origin of the Charge Carrier Mobility in Small Molecule Organic Semiconductors

Small‐molecule organic semiconductors are used in a wide spectrum of applications, ranging from organic light emitting diodes to organic photovoltaics. However, the low carrier mobility severely limits their potential, e.g., for large area devices. A number of factors determine mobility, such as molecular packing, electronic structure, dipole moment, and polarizability. Presently, quantitative ab initio models to assess the influence of these molecule‐dependent properties are lacking. Here, a multiscale model is presented, which provides an accurate prediction of experimental data over ten orders of magnitude in mobility, and allows for the decomposition of the carrier mobility into molecule‐specific quantities. Molecule‐specific quantitative measures are provided how two single molecule properties, the dependence of the orbital energy on conformation, and the dipole‐induced polarization determine mobility for hole‐transport materials. The availability of first‐principles based models to compute key performance characteristics of organic semiconductors may enable in silico screening of numerous chemical compounds for the development of highly efficient optoelectronic devices.