"SINGLE GRAIN" OSCILLATING CRYSTAL METHOD FOR ULTRAMICROANALYSIS BY X-RAY

采用“单颗”回摆法,在普通的德拜相机中,对重量只有0.003μg的超微量物质进行X射线相分析。 对方法的原理、衍射角的测量及计算、衍射斑点的数目、各个斑点的相对强度与ASTM卡片上同一物质各线条的相对强度间的关系等问题,进行了详细的分析和讨论。 举例说阴这种方法在鉴定稀土夹杂物上的应用,并验证所推导的公式的正确性。     

Effect of laser fluences on the structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation

Carbon nitride films were deposited by direct current plasma assisted pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. The surface morphology, composition and bonding structure of the deposited films were characterized by atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, Raman, and X-ray photoelectron spectroscopy (XPS). The effect of laser fluences in the range 0.5–3 J/cm² on the surface morphology, composition and bonding structure of the carbon nitride films were systematically studied. As laser fluence is increased, AFM results show a great decrease in the surface roughness of carbon nitride films. FTIR and XPS results indicate an increase in the N/C ratio and the content of N atoms bonded to sp³ C, as well as a decrease in the content of H atoms and the content of N atoms boned to sp² C in the deposited films, and Raman spectra indicate an increase in the content of disordered sp² C atoms and the sp² cluster size. The increase in the film density and the decrease in the particle fraction contribute to the decrease of surface roughness with increasing laser fluence.     

A STUDY OF RATE-DEPENDENCE AT ELEVATED TEMPERATURE FOR AN Al-Cu-Mg ALLOY

The hot deformation of an Al-Cu-Mg alloy was studied in the two temperature ranges (room temperature-300℃ and 400℃-480℃). The rate-independent flow curves are typical of elasto-plastic response with significant work hardening followed by strain softening below 300℃. Similar dislocation structures with high density tangled into grain interiors were observed by TEM, which suggests that the process of obstacles arresting mobile dislocations results in this macroscopically rate-independence. At 400-480℃, all rate dependent flow behaviors characterized by a continuous softening after an initial work hardening at a small plastic strain show large tensile elongations. Long dislocation segments around the second phases infer their good mobility to climb across obstacles. Grain boundary morphology observed by TEM suggests that the capacity of the grain boundaries to absorb the dislocations sensitively accounts for the rate-dependent mechanical properties.     

二辊轧机轧辊堆焊新技术应用

介绍了二辊粗轧机轧辊利用堆焊新技术开展堆焊修复试验与应用，并介绍了堆焊材料的选择、堆焊工艺以及取得的良好效果。     

铝合金车轮铸造模具CAD/CAE技术的应用

随着计算机应用技术的发展，CAD/CAE技术已广泛应用于各行各业的设计，主要介绍了铝合金年轮铸造模具上应用CAD/CAE技术的成效。     

金属薄膜结合性能的评价方法研究

针对Al2O3基体上磁控溅射沉积的Au／NiCr／Ta多层金属薄膜，用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法，对比研究了金属薄膜与基体的结合性能。结果表明：压痕试验从压痕形貌上很难判断薄膜与基体是否发生剥离，压入过程中也没有诱发裂纹的产生，更无法分辨薄膜层间的分离；由于金属薄膜的塑性变形，滚动接触疲劳法很难应用于金属薄膜结合性能的表征：划痕法可应用于多层金属薄膜的特异划擦行为研究，其中摩擦力模式能反映压头进入不同金属膜层时的变化，层间声发射信号的灵敏度不如摩擦力信号，对应试验条件，摩擦力曲线存在若干以拐点为特征的载荷，摩擦力曲线上出现的拐点及拐点特征载荷值可以在一定程度上反映多层膜的层数和层厚，并可刻划出该膜／基体系承受压入载荷而不发生剥落的能力。     

Analysis of the central cavity of axisymmetric forward extrusion by the upper bound approach

In this paper, the use of a kinematically admissible velocity field to predict the presence of a central cavity in the final stage of axisymmetric forward extrusion is advanced, in accordance with the results of Moire experiments. On the basis of the velocity field, the critical condition for central cavity formation is obtained by the upper bound approach. Furthermore, the quantitative relationships between central cavity formation and process parameters (reduction in area, frictional factors on the ram and chamber wall, relative residual thickness of the of the billet) are studied. The results show that (1) the critical relative residual thickness of the billet used for the central cavity formation is affected primarily by the reduction in area and the frictional factors on the ram, and slightly by the frictional factor on the chamber wall; (2) the relative dimensions of the central cavity increase with a decrease in the relative residual thickness of the billet; (3) the growth rate of the central cavity decreases with an increase in the frictional factors on the ram, but is affected by the frictional factors on the chamber wall only slightly. Good correlation is found between the analytical and experimental results.     

开卷机旋转给油接头密封问题的探讨

本文扼要介绍了现有开卷机旋转给油接头的密封方式及存在的问题,提出了改善密封效果的几点措施,并对新型旋转给油接头进行了必要的分析和计算。     

堆焊技术在板带热连轧机支承辊上的应用

本文介绍堆焊技术在热连轧机支承辊再利用方面的试验和应用,叙述了堆焊材料的选择,堆焊工艺以及取得的效果和经济效益。     

铸铁溶液中氧的含量及形态

本文研究了铸铁溶液中全氧量的变化,并用定氧探头检测了溶解氧量。研究表明,铁水中全氧量随冲天炉送风湿度增加而明显增大。铁水含氧量增高主要是化合氧增多。而溶解氧变化很小。