核电材料在模拟反应堆环境中应力腐蚀破裂测试技术与性能评价

简要介绍了采用慢应变速率试验，Ｕ型弯曲和Ｃ形环试验等技术，分别对８００合金，３０４和３１６及３１６Ｔｉ不锈钢Ａ５３３Ｂ压力容器用多在模拟核反应堆环境中的应力腐蚀破裂敏感性性进行的试验研究的一些主要结果；并结合电化学测试和表面膜俄歇电子能谱分析结果进行了讨论。     

仿生矿化的研究Ⅰ．文石型碳酸钙的合成

在聚乙二醇（ＰＥＯ）存在下，ＣａＣｌ２和Ｎａ２ＣＯ３反应生成了类似红鲍鱼壳的含有ＰＥＯ的碳酸钙──高聚物复合材料。Ｘ－衍射和电镜照片显示，它有两种微观结构：外层为文石型和方解石型结构，内层为针状文石型结构。热重分析表明，该材料中含有３％左右ＰＥＯ。结果说明，聚合物对碳酸钙晶核的形成和晶体的生长有很大影响，并对其形成机理进行了初步探讨。     

红外热图技术在气功研究中的应用

本文用红外技术研究发功时上肢体表温度变化的特点和它的规律。     

CA／PAN中空纤维血浆分离膜的结构与性能

本研究以CA及PAN的共混溶液,通过干-湿法纺丝制取中空纤维,利用共混高聚物各组分在凝固剂中相分离速度的差异,形成具有稳定结构的中空纤维孔膜,该膜用于分离血液中的血浆成分具有良好效果。讨论了成型条件及添加剂等对膜结构、性能的影响,用SEM及图相分析仪、MAP压汞仪及DSC等分析手段,对膜的微孔结构、形态、孔尺寸及中空纤维膜的血浆通量和水通量等进行了系统的考查。     

Delay-dependent state estimation for delayed neural networks

In this letter, the delay-dependent state estimation problem for neural networks with time-varying delay is investigated. A delay-dependent criterion is established to estimate the neuron states through available output measurements such that the dynamics of the estimation error is globally exponentially stable. The proposed method is based on the free-weighting matrix approach and is applicable to the case that the derivative of a time-varying delay takes any value. An algorithm is presented to compute the state estimator. Finally, a numerical example is given to demonstrate the effectiveness of this approach and the improvement over existing ones.     

新疆伊犁托海水电站拱坝坝体变形监测分析

根据托海拱坝5号坝段、7号坝段例垂线实测资料分析，说明了新疆寒冷地区坝体采取聚胺脂喷涂施工措施后对坝体变形的影响，以及右坝肩渗漏对右坝肩岩体的影响，分析结果为托海水电站通过国家电力公司大坝安全监察中心大坝安全首次定检提供了科学依据。     

建筑师职业组织的类型和运作方式

介绍了国外建筑师的职业组织类型，以及不同职业组织的运作特点，说明建筑师的职业组织对发挥建筑师才能产生的影响。     

New insights in polarity-dependent oxide breakdown for ultrathin gate oxide

In this work, a quantitative analysis is applied to resolve the newly reported polarity-dependent charge-to-breakdown (Q/sub BD/) data from thick oxides of 6.8 nm down to ultrathin oxides of 1.9 nm. Three independent sets of Q/sub BD/ data, i.e., n/sup +/poly/NFET stressed under inversion and accumulation, and p/sup +/ poly/PFET under accumulation are carefully investigated. The Q/sub BD/ degradation observed for p-type anodes, either poly-Si or Si-substrate, can be nicely understood with the framework of maximum energy released by injected electrons. Thus, this work provides a universal and quantitative account for a variety of experimental observations in the time-to-breakdown (T/sub BD/) and Q/sub BD/ polarity-dependence of oxide breakdown.     

A Built-in Self-Test Scheme with Diagnostics Support for Embedded SRAM

In this paper we propose a novel built-in self-test (BIST) design for embedded SRAM cores. Our contribution includes a compact and efficient BIST circuit with diagnosis support and an automatic diagnostic system. The diagnosis module of our BIST circuit can capture the error syndromes as well as fault locations for the purposes of repair and fault/failure analysis. In addition, our design provides programmability for custom March algorithms with lower hardware cost. The combination of the on-line programming mode and diagnostic system dramatically reduces the effort in design debugging and yield enhancement. We have designed and implemented test chips with our BIST design. Experimental results show that the area overhead of the proposed BIST design is only 2.4% for a 128 KB SRAM, and 0.65% for a 2 MB one.     

1/f Noise separated from white noise with wavelet denoising

The low-frequency noise in the devices often appears to be a superposition of 1/f noise and white noise, which are induced by different physical mechanisms or microscopic defects. The separation of the two noises is necessary especially in the characterization of quality and reliability by means of noise measurement. The traditional separation method is usually used in frequency domain with limited frequency range, and the estimated value of exponent index γ for 1/f^γ noise has considerable error when the ratio of 1/f noise and white noise is smaller than 20 dB. In this paper, based on wavelet denoising theory, a new method is proposed to separate 1/f^γ noise from white noise in time domain and can be used to estimate γ values with much better accuracy even if the ratio of 1/f noise to white noise in low enough.