Traction-based Completed Adjoint Double Layer Boundary Element Method in elasticity

This paper is concerned with a traction-based Completed Adjoint Double Layer Boundary Element Method to solve for the surface traction of a system of rigid particles embedded in an elastic matrix. The main feature of the method is a single layer representation of the displacement field, which leads to a system of second-kind integral equations for the traction field, the extreme eigenvalue of which could be deflated, allowing iterative solution strategies to be effectively applied. The method is therefore most suitable for large-scale simulations of particulate solids. The method is benchmarked against some known analytic solutions, including the difficult stress singularity problems at sharp edges. The effectiveness of the method in dealing with a large number of inclusions is also demonstrated with an elongational deformation problem involving up to 25 inclusions.Research supported by the Australian Research Council (to NP-T and X-JF) and the National Natural Science Foundation of China (X-JF).     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.     

A perceptually motivated three-component image model-part II:applications to image compression

For past I see ibid., vol.4, no.4, p.405 (1995). The use of the image model of Part I is investigated in the context of image compression. The model decomposes the image into a primary component that contains the strong edge information, a smooth component that represents the background slow-intensity variations, and a texture component that contains the textures. The primary component, which is known to be perceptually important, is encoded separately by encoding the intensity and geometric information of the strong edge brim contours. Two alternatives for coding the smooth and texture components are studied: entropy-coded adaptive DCT and entropy-coded subband coding. It is shown via simulations that the proposed schemes, which can be thought of as a hybrid of waveform coding and feature-based coding techniques, result in both subjective and objective performance improvements over several other image coding schemes and, in particular, over the JPEG continuous-tone image compression standard. These improvements are especially noticeable at low bit rates. Furthermore, it is shown that a perceptual tuning based on the contrast-sensitivity of the human visual system can be used in the DCT-based scheme, which in conjunction with the three-component model, leads to additional subjective performance improvements.     

Hierarchical production control for a flow shop with dynamic setup changes and random machine breakdowns

In this paper, we study a manufacturing system consisting of two machines separated by two intermediate buffers, and capable of producing two different products. Each product requires a constant processing time on each of the machines. Each machine requires a constant non-negligible setup change time from one product to the other. The demand rate for each product is considered to be piecewise constant. Each machine undergoes failure and repair. The time-to-failure and time-to-repair are exponentially distributed random variables. The setup change and processing operations are resumable. We model our system as a continuous time, continuous flow process. An optimal control problem is formulated for the system to minimize the total expected discounted cost over an infinite horizon. To determine the optimal control policy structure, a discrete version of the problem is solved numerically using a dynamic programming formulation with a piecewise linear penalty function. A real-time control algorithm is then developed with the objective of maintaining low work-in-process inventory and keeping the production close to the demand. The algorithm uses a hierarchical control structure to generate the loading times for each product on each machine in real time and to respond to random disruptions in the system. The system is simulated using this algorithm to study its performance. The performance of the algorithm is also compared to alternative policies.     

Heading towards an advanced signalling system for multimedia,multiparty services in broadband ISDN

Introduction of the broadband integrated services digital network (B-ISDN) will enable network users to make use of advanced multimedia, multiparty services. With this aim in view, RACE II project R2044, MAGIC, is investigating long-term signalling requirements, architecture and protocols for B-ISDN. New service concepts are being developed in MAGIC which will provide more flexibility when compared to narrowband ISDN (N-ISDN). The service requirements and other signalling requirements, such as the separation between call and associated connections at the network-node interface, are used to determine the distribution of functions over the network. The signalling protocols which are used to exchange the signalling information are subsequently developed. These signalling protocols are simulated to prove the performance and the feasibility of call handling concepts     

Determining the core of journals of a research centre: The example of researchers from the Department of Rural Economy and Sociology of the Institut National de la Recherche Agronomique,France

This paper analyses the determination of visibility of journals in which researchers of INRA (National Institute for Agricultural Research) publish. The corpus is comprised of 671 articles published over a period of four years in 258 journals. The advantage of the method applied for determining the visibility of journals is that it combines two approaches: a) bibliometric indicators (coverage by the ISI-publications and by two specific French databases) and b) experts' opinions (10 economists and sociologists). The main results are: a) There is a convergence between the opinion of the experts and «visibility» in the databases, b) The impact factor confirms the main opinions of the experts. The first journals ranked by the experts and JCR Social Sciences are the same but represent only 40 per cent of the total journals analysed. The other journals were revealed by the experts and French databases.«Whoever seeks to pass a balanced but lucid judgement on the general trends of the activity carried out by the profession to which he belongs, is liable to say either banalities or to hurt his colleagues»The notion which we retain of core is that which is successively and conjointly validated by the experts and by the major databases representative of the field.This study was financed by the Department of Rural Economy and Sociology of INRA.     

MRI of intramedullary sarcoidosis: follow-up of a case

Significative enhancement of free radical formation (FRO) in vivo is an important feature of hypertensive disorders of pregnancy (HDP), namely preeclampsia (PIH). The latest investigations about the pathology of HDP, showed the contribution of placental circulation to the development and evolution of such disease. The placental bed can be a potential source of FRO or activation of cells that can produce FRO. Glutathione, is an important molecule for cellular protection against damage, is a cofactor of many enzymes, in particular, for the glutathione peroxidase of the placental tissue; this enzyme in the placenta bed prevent the production of thromboxan and lipoperoxides; the latter are potentially damaging to the endothelium cells and can cause vasoconstriction, the most important feature of PIH. The activity of that enzyme is deficient in PIH. We studied, by fluorometric assay, the concentrations of the two states of glutathione in placental homogenates (PLH) from pregnant women without pathology (PWN) and from pregnant women with PIH (PWPIH). The data showed significant low concentrations in the PLH of the two states of glutathione in the PWN against high concentrations of this molecule in the PLH from PWPIH. This feature can result from a deficient user of the glutathione by the cellular mechanism for prevention against oxidative factors. In addition, our study shows a biochemical marker that is suggestive that the placental bed is a potential source of FRO production in PIH.