Mechanical behaviour of metal–matrix composite deposits

The electroplating technique is used for producing thin sheets of copper- or nickel-based composites containing different volume fractions of -alumina dispersions. The microhardness and tensile behaviour of such composites, in both the as-deposited and the annealed state, are characterized. The strengthening mechanism of electroplated composites is found to be a combination of Orowan-type strengthening and the Hall–Petch effect.     

Liquid detection with InGaAsP semiconductor lasers having multiple short external cavities

A liquid detection system consisting of a diode laser with multiple short external cavities (MSXC's) is reported. The MSXC diode laser operates single mode on one of 18 distinct modes that span a range of 72 nm. We selected the modes by setting the length of one of the external cavities using a piezoelectric positioner. One can measure the transmission through cells by modulating the injection current at audio frequencies and using phase-sensitive detection to reject the ambient light and reduce 1/f noise. A method to determine regions of single-mode operation by the rms of the output of the laser is described. The transmission data were processed by multivariate calibration techniques, i.e., partial least squares and principal component regression. Water concentration in acetone was used to demonstrate the performance of the system. A correlation coefficient of R(2) = 0.997 and 0.29% root-mean-square error of prediction are found for water concentration over the range of 2-19%.     

Chromium-doped forsterite: the influence of crystal characteristics on laser performance

A study of the dependence of the gain-switched laser operation of chromium forsterite on crystal parameters is presented. Results are reported for a wide range of chromium (IV) ion concentration: 0.02-0.12 at. % and 12-41 figure of merit, with emphasis on performance of the recently developed material with a dopant level of >0.10 at. %. Threshold and slope efficiency calculations are compared with measured performance for all crystals, with variation of pump polarization and output coupling. With 3% output coupling, the lowest threshold of 1.8 mJ, and highest slope efficiency of 13% were measured for a short, high-dopant-level crystal. With 33% output coupling a slope efficiency of 44% was measured for this crystal. Results demonstrate the considerable potential of short, high-dopant-level crystals for applications such as amplification, diode pumping, and narrow-bandwidth operation.     

A comparison of strain relief behaviour of In x Ga1− x As alloy on GaAs (001) and (110) substrates

A comparative study on the strain relief behaviour of epitaxially grown In _x Ga_{1 – x} As (where 0.1 × 1) alloys on GaAs (001) and (110) were carried out using transmission electron microscopy (TEM) and high resolution X-ray diffraction (XRD). Three different strain relief mechanisms related to the formation of misfit dislocations (MDs) were observed. The dominant strain relief process can be a single mechanism or a combination of two of the three mechanisms depending on the substrate orientation and the in content.     

Experimental study on fitness of one-piece casting osseointegrated implant frameworks with relation to fixture abutment positions

An experiment on fitness of one-piece casting osseointegrated implant frameworks was performed among three fixture abument positions where other conditions were controlled. The result revealed that there was statistically significant differences in dimensional change among the three fixture abument positions. In terms of the relation between abument position and fitness, the more backward the abument position was, the worse the osseointegrated framework fitness was. The frameworks showed deformations in "arch form" and "warp" in three dimensions.     

Property-microstructure correlation in in situ formed Al2O3, TiB2 and Al3Ti mixture-reinforced aluminium composites

The in situ formed Al₂O₃, TiB₂ and Al₃Ti mixture-reinforced aluminium composites were successfully fabricated by the reaction sintering of the TiO₂-B-Al system in a vacuum. With increasing boron content in the TiO₂-B-Al system, the amount of generated TiB₂ in the composites increased and Al₃Ti content decreased. At the same time the distribution uniformity of the in situ formed Al₂O₃ and TiB₂ particulates was obviously improved, and the size of the Al₃Ti particles was reduced. The in situ Al₂O₃ and TiB₂ particulates had sizes from 0.096–1.88 m. The interface between the in situ formed particulates and the aluminium matrix was clean, and no consistent crystallographic orientation relationship was found. The strength and elastic modulus of the composites was significantly improved by lowering the Al₃Ti content. When the boron content in the TiO₂-B-Al system rose, the morphology of the tensile fracture surface of the composites was changed from large fractured Al₃Ti blocks and fine dimples, to fine dimples and pulled-out particulates. The strengthening and fracture of the composites have been modelled.     

The calculation of radial dose from heavy ions: predictions of biological action cross sections

The track structure model of heavy ion cross sections was developed by Katz and co-workers in the 1960s. In this model the action cross section is evaluated by mapping the dose-response of a detector to gamma rays (modeled from biological target theory) onto the radial dose distribution from delta rays about the path of the ion. This is taken to yield the radial distribution of probability for a "hit" (an interaction leading to an observable end-point). Radial integration of the probability yields the cross section. When different response from ions of different Z having the same stopping power is observed this model may be indicated. Since the 1960s there have been several developments in the computation of the radial dose distribution, in the measurement of these distributions, and in new radiobiological data against which to test the model. The earliest model, by Butts and Katz made use of simplified delta ray distribution functions, of simplified electron range-energy relations, and neglected angular distributions. Nevertheless it made possible the calculation of cross sections for the inactivation of enzymes and viruses, and allowed extension to tracks in nuclear emulsions and other detectors and to biological cells. It set the pattern for models of observable effects in the matter through which the ion passed. Here we outline subsequent calculations of radial dose which make use of improved knowledge of the electron emission spectrum, the electron range-energy relation, the angular distribution, and some considerations of molecular excitation, of particular interest both close to the path of the ion and the outer limits of electron penetration. These are applied to the modeling of action cross sections for the inactivation of several strains of E-coli and B. subtilis spores where extensive measurements in the "thin-down" region have been made with heavy ion beams. Such calculations serve to test the radial dose calculations at the outer limit of electron penetration. We lack data from which to test these calculations in regions close to the path of the ion aside from our earliest work on latent tracks in plastics, though it appears that the criterion then suggested for the threshold of track formation, of a minimal dose at a minimal distance (of about 20 angstroms, in plastics), remains valid.     

Mutations in the ligand-binding domain of the kit receptor: an uncommon site in human piebaldism

Heterozygous mutations in the gene for the Kit transmembrane receptor have been identified recently in human piebaldism and mouse "dominant spotting." Interestingly, all of the 14 known missense mutations that cause depigmentation in these species map to the tyrosine kinase domain of the receptor, whereas none have involved the extracellular ligand-binding domain. In an attempt to detect these uncommon mutations, we screened the nine exons encoding the extracellular portion of Kit for single-strand conformation polymorphisms (SSCP) in eight piebald subjects previously reported to be negative for kinase mutations. Four of these eight kindreds proved to carry novel mutations. The first mutation, found in two apparently unrelated probands with mild piebaldism and English ancestry, substitutes an arginine for a highly conserved cysteine at codon 136. This substitution disrupts a putative disulfide bond required for formation of the second Ig-like (D2) loop of the Kit ligand-binding domain. The second mutation, detected in a piebald kindred characterized by unusually limited depigmentation, substitutes a threonine for an alanine at codon 178, a site just proximal to conserved cysteines at codons 183 and 186. The third mutation, occurring in a kindred with more extensive depigmentation, is a novel four-base insertion in exon 2 that results in a proximal frameshift and premature termination. The data strongly suggest that piebaldism can result from missense mutations in the Kit ligand-binding domain, although the resulting phenotype may be milder than that observed for null or kinase mutations. The apparent clustering of these uncommon mutations at or near the conserved cysteines for the D2 Ig-like loop further suggests a critical role for this region in Kit receptor function.     

Synchronized Cooperative Schedules for collaborative resource availability using population-based algorithm

Resource availability in wireless devices has many constraints with major the dynamically changing topology nature of such environments. A challenging research issue is to combine the availability of the requested resources and the time-access for sharing resources of each device with the synchronized motion for time duration t as in real time Vehicle-to-Vehicle (V2V) communication, in a cooperative manner. This work investigates this scenario using resource sharing slots that are scheduled according to the direction movement and the connectivity within a specific allowed range. Additionally a Synchronized Cooperative Schedule scheme is proposed where the duration of the requested resources that are allowed to be exchanged within a given path, is provided by the nodal delay table, where nodes with high ping delays are isolated from the requested path. The proposed scheme evaluates also the users’ grade of participation in the sharing process of the requested resources as well as it utilizes a quantitative scheme which indicates the correctness ratio of the overall replica allocation process at a certain time for optimum replica distribution. Simulation study is carried out for throughput, scheme’s characterization against performance and for the correctness of the overall replica allocation, taking into account a number of metrics and the estimation of the effects of implementing the proposed scenario in real time. Simulation results show that the proposed scheme enables greater intercluster participation while resources are being exchanged in a reliable manner.     

Shrinkage and model selection with correlated variables via weighted fusion

In this paper, we propose the weighted fusion, a new penalized regression and variable selection method for data with correlated variables. The weighted fusion can potentially incorporate information redundancy among correlated variables for estimation and variable selection. Weighted fusion is also useful when the number of predictors p is larger than the number of observations n. It allows the selection of more than n variables in a motivated way. Real data and simulation examples show that weighted fusion can improve variable selection and prediction accuracy.