影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

Magnetic Resonance Visualisation of Flow and Pore Structure in Packed Beds with Low Aspect Ratio

Different NMR techniques were combined to obtain the structure and velocity information for a systematic investigation of fixed beds with low aspect ratio (tube diameter to particle diamter, d_t/d_p) in the range 1.4 to 32. The structure of the void space was determined for a variety of packed beds of glass beads or regular and irregular porous pellets by magnetic resonance imaging (MRI). Based on the images the radial distribution of the voids within the bed was obtained. Ordering effects were found even for non‐spherical and polydisperse particles, and a maximum of the fluid density near the tube wall was confirmed for all pellet geometries and sizes. By combining MRI with velocity encoding, velocity profiles and distributions of flow velocity components of a single fluid phase through packed beds have been acquired. The radial velocity distribution follows an oscillatory pattern which largely reflects the ordering of the particles, which can be accessed from the density distribution of the interparticle fluid. Maximum velocities of up to four times the average value were found to occur near the tube wall. This wall effect was observed for all but the smallest particles, where the aspect ratio was d_t/d_p = 32. Moreover, a visualisation of flow pattern in the presence of packed particles was achieved by using a tagging technique, and the stationary flow field could be identified for an experimental time of several hours.     

一种微粉碎新设备——离心碎磨一体机

介绍一种离心碎磨一体机的工作原理、构造和特点 ,分析了碎磨机理及应用前景     

基于LabWindows/CVI的多线程测控软件设计技术

多线程技术是W in32操作系统的一项重要软件技术。CVI 6.0及其以后版本提供了线程池和异步定时器两种多线程运行机制,为测控软件的设计开发带来了一次技术飞跃。文中结合测控软件设计实例,详细介绍了在CVI平台下多线程编程技术的应用方法。     

导数火焰原子吸收法对调味品中锌的测定

将微量脉冲进样技术和导数火焰原子吸收法结合，建立了测定调味品中锌含量的新方法。该方法的检出限为0．013μg／mL，精密度4．46％，回收率96．67～113．33。     

谷氨酰胺(Gln)活性肽营养液的研究进展

对G1n小肽在氨基酸营养液中的使用以及G1n小肽的稳定性和代谢机制进行了论述。G1n是一种“条件必需氨基酸”，但Cln的水溶液不稳定，因而在氨基酸输液或氨基酸营养被中，用G1n小肽代替G1n单体使用。G1n小肽含有取代的α—NH2，使Cln小肽的稳定性大大增加。     

无氢类金刚石碳膜的研究进展

介绍了无氢类金刚石碳膜的制备方法 ,它们的机械、光学、电学性能 ,将无氢与含氢的类金刚石碳膜进行了简单比较 ,总结及探讨了它们的应用     

长链烯烃-苯烷基化反应的分子筛催化剂再生性能的研究

通过热重分析和活性稳定性评定考察催化剂的再生性能。研究结果表明,进行氯气吹扫以及苯抽提后进行氮气吹扫两种预处理,导致失活催化剂的起燃点和烧焦反应活化能均有所提高,有利于控制烧焦反应速度。按苯抽提、氮气吹扫、烧焦的顺序,分三个阶段进行催化剂再生,再生催化剂的活性稳定性得到更充分的恢复。