寻找无效或低效生产层的方法

注水和产液量加大是导致特高含水期油气生产成本上升的主要要素，如何寻找无效或低效生产层、控制无效或低效注水及产液量已成为搞好综合调整、降低油气生产成本的关键问题。因此，从理论分析、实验数据及经验值等方面分析、探讨了以累积注水倍数、数值模拟计算、吸水剖面资料、油井找水资料、注水井分层压力降落速度、精细地质研究等为依据的6种寻找无效或低效生产层的方法，并将其应用于喇嘛甸油田。实践表明，以累积注水倍数为依据，同时结合测井、试井资料，能够比较准确地判断无效或低效生产层。     

佛尔哈德法测定氯化除汞上清液中的氯量

控制pH4-6，用锌粉还原氯化除汞上清液中的汞（Ⅱ）离子，取置换后液加入过量的硝酸银标准溶液，以硫酸铁铵溶液作指示剂，用硫氰酸钾标准滴定溶液滴定来测定氯量。该方法的检出限：0．25mg／100mL，回收率：98％-101％。     

基于SolidWorks的螺杆压缩机机体三维建模设计

应用SolidWorks软件,建立了螺杆压缩机机体三维实体模型.对螺杆压缩机机体的内、外螺旋面的建模进行了分析和研究,提出了建立分段螺旋面模型的基本思路和方法.     

Optical sequence generation based on collision avoidance usingchaotic mode transitions

An adaptive optical sequence generation scheme has been described in a nonlinear optical ring which exhibits chaotic dynamics. The adaptation is based on avoidance of collisions between the ring output and signals from another source. It is shown that collision-avoiding sequences can be autonomously selected via chaotic mode transitions induced by the feedback of collision signals. Experimental results demonstrate that the method can be successful for various collision signal patterns with different periods and pulsewidths. The mechanism of inducing chaos with collision signals is examined both experimentally and with numerical simulations and the results verify the effectiveness of the proposed adaptation method. A possible application of the proposed signal generation scheme in intelligent optical communication networks is mentioned     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

浅谈如何做一名新时期创新型教师

教师的职业道德是贯穿教育全过程的精神支柱,它对学生和社会都会有深远的激励和影响作用;而熟练掌握专业知识和教育理论知识是教师业务能力的本质要求。新时期的创新型教师都必须不断地在这两个方面进行提升才能够符合时代的要求。     

Phase transformation of calcia-alumina-magnesia fibres produced by inviscid melt spinning

CaO-Al₂O₃-MgO (CAM) ceramic fibre produced via inviscid melt spinning (IMS) was investigated for phase transformation. Differential thermal analysis (DTA) on the as-spun CAM fibre gave two transformation peaks, one for exothermic peak at around 927°C and the other for endothermic one at around 1100°C. In order to identify each phase transformation x-ray diffraction (XRD) analysis was performed on the CAM fibres heat-treated to each phase transformation completion temperature. The exothermic peak was determined to represent crystallization of remaining amorphous phase in the as-spun CAM fibre. The endothermic peak was determined to correspond to transformation of non-equilibrium CaO · Al₂O₃ phase to equilibrium 3CaO· 5Al₂O₃ phase.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

消失模工艺在矿车铸件生产中的实践

针对矿车铸件的生产工艺,大胆引进消失模工艺,通过实践及对生产过程的经验总结,为进一步完善提高生产技术和改进措施,扩大消失模工艺在其他产品的应用提出了意见。