Stabilizing bit-rates in networked control systems with decentralized event-triggered communication

In a decentralized event-triggered networked control system (NCS), an agent samples and transmits its local state information to the controller when some local event occurs. Such event-triggered NCSs were expected to be more efficient than traditional periodically sampled system in terms of communication channel usage. This paper studies the stability of decentralized event-triggered NCS in the presence of quantization and delays. We point out some potential issues in decentralized event-triggered design and propose an alternative decentralized event with a linear-affine threshold, which avoids infinitely fast data transmission. Conditions on quantizer and communication channel are derived, which, when satisfied, can guarantee stability of the resulting NCS. Based on these conditions, finite stabilizing bit-rates are provided.     

UG软件CAD/CAM技术在注塑模生产中的应用

以手机外壳为例，介绍利用UG软件提供的MoldWizard和CAM数控编程两大模块，实现从模具设计到数控铣加工的全过程。     

新试剂DBPMP用于铀的萃取光度法测定研究

本文将新型螯合萃取剂DBPMP用于铀的萃取光度法研究。提出了一种选择性好,灵敏度高的测定方法。铀浓度在0～5.0mg/25ml范围内符合比尔定律。将本法用于矿石中铀的测定,结果满意。     

掺锰BaTiO3 PTCR陶瓷的电子顺磁共振研究

利用电子顺磁共振（EPR）方法对Mn掺杂的BaTiO3 PTCR陶瓷在120－450K的温度范围内进行了研究，研究结果表明：高自旋Mn^2 离子的6重谱线非常明显，表征谱线位置的g因子为2．009 9,Mn^2 离子信号弱弱与BaTiO3晶体结构密切相关，Mn^2 离子信号的温度分布呈U型，即在三方相和立方相时，信号强度较强，而在四方相和斜方相时信号很弱，这是因为在四方相和斜方相中，由于BaTiO3晶体结构的扭曲和畸变，导致Mn^2 和Vo空位缔合生成Mn^2 -Vo复合缺陷，未成对电子的消失以及复合缺陷n^2 -Vo的生成最Mn^2 在四方相和斜方相（200－380K）消失的主因，实验中没有发现Mn^3 和Mn^4 的信号，而与实验的环境条件一致，掺Mn后样品Curie点的漂移可能是Mn进入晶格的一个判据，此外，由于试样的n(Ba)/n(Ti)=1，因而没有发现钡空位VBa及其它的复合缺陷（如：VBa-Mn^2 ,Mn^3 -Vo,La^3 -Mn^3 等），Mn^2 离子等电子陷阱的生长是Curie温度处电阻骤然增加的主要原因。     

Effect of Acceptor and Donor Dopants on the Dielectric and Tunable Properties of Barium Strontium Titanate

The effects of different concentrations of Mn²⁺, Mg²⁺, Al³⁺, Fe³⁺, La³⁺, and Nb⁵⁺ on the dielectric and tunable properties of Ba_0.6Sr_0.4TiO₃ ceramics were investigated. It was found that doping in small amounts with acceptor ions such as Mg²⁺, Fe³⁺, and Al³⁺ could meliorate the dielectric properties clearly. Decrease of dielectric loss was attributed to the formation of compensating defects originating from acceptor substitution. It was concluded that the tunability was linked to both the dielectric constant and the grain size. A higher figure of merit was obtained by doping the ceramics with smaller ions of Al and Fe, compared to Ti.     

PET工程塑料概况

综述了PET工程塑料合金化方面的主要研究开发情况，就PET／PBT、PET／PC、PET／聚酯聚醚、PET／尼龙、PET／PE等合金的研究及应用情况作了简单介绍。     

Effects of the electrospray ionization parameters on the formation and morphology of colloidal microspheres of polyacrylonitrile

Polyacrylonitrile colloidal microspheres have been successfully prepared with different concentrations of electrospraying polyacrylonitrile solutions. The morphology of the colloidal spheres has two kinds of structures and is strongly affected by electrospray‐ionization parameters, such as the polymer concentration, applied voltage, and distance between the electrodes. The solvent can also affect the morphology of polyacrylonitrile. The optimum conditions for preparing colloidal spheres have been found, and differential scanning calorimetry results indicate that polyacrylonitrile colloid spheres are amorphous. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2889–2893, 2006     

α－SiC：H薄膜的热行为研究

采用射频反应溅射工艺沉积了α—SiC:H薄膜。利用微分扫描量热器(DSC)和差热分析仪(DTA)两种热分析方法确定了α—SiC:H薄膜的脱H过程和相转变温度，353．2℃脱Si—H和602．6℃脱C—H，并在1080℃相变结晶。在氨气流保护下的光热炉内进行热处理，Fourier红外光谱(FTIR)和反射谱的研究表明，400℃热处理后薄膜内的H含量急剧下降。高温热处理中的脱H过程有利于游离硅和游离碳的反应形成额外的Si—C键，促进薄膜致密，并能提高其在紫外部分的反射率，降低红外区域的反射率。热处理温度超过500℃，容易导致薄膜脱落。适当的退火工艺有利于拓展碳化硅薄膜在空间材料上的应用。     

塑料挤出成型模具流道优化设计

本文依据流变学理论，采用优化方法进行挤出成型模具（即机头）流道设计，探讨了建立流道优化数学模型的有关问题。     

SAR-derived wind fields at the coastal region in the East/Japan Sea and relation to coastal upwelling

The relationship between the modification of synthetic aperture radar (SAR) wind field and coastal upwelling was investigated using high-resolution wind fields from Advanced Land Observing Satellite (ALOS) Phased Array type L-band synthetic aperture radar (PALSAR) imagery and sea-surface temperature (SST) from National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer (NOAA/AVHRR) data. The retrieved SAR wind speeds seem to agree well with in situ buoy measurements with only a relatively small error of 0.7 m s^?1. The SAR wind fields retrieved from the east coast of Korea in August 2007 revealed a spatial distinction between near and offshore regions. Low wind speeds of less than 3 m s^?1 were associated with cold water regions with dominant coastal upwelling. Time series of in situ measurements of both wind speed and water temperature indicated that the upwelling was induced by the wind field. The low wind field from SAR was mainly induced by changes in atmospheric stability due to air–sea temperature differences. In addition, wind speed magnitude showed a positive correlation with the difference between SST and air temperature (R² = 0.63). The dependence of viscosity of water on radar backscattering at the present upwelling region was negligible since SAR data showed a relatively large backscattering attenuation to an SST ratio of 1.2 dB °C^?1. This study also addressed the important role of coastal upwelling on biological bloom under oligotrophic environments during summer.