基于HIS颜色空间颜色对的图像检索系统

提出了一种在HIS空间中进行的基于颜色对的图像检索算法.为突出颜色在画面中的位置在内容检索上的作用,算法在HIS颜色空间的上对各颜色分量进行量化,用颜色对来描述图像的颜色特征,定义了基于颜色对的相似度度量,利用图像颜色特征进行相似度匹配和检索.实验结果表明,该算法能比较快速、有效地针对图像内容进行检索.     

长沙走马楼三国吴简研究的回顾

介绍了吴简的基本内容,较为全面地回顾了吴简的研究现状,并通过分析中外专家研究长沙走马楼吴简的成果,探讨了吴简研究的本质。     

信息化条件下任职士官计算机课程教学改革初探

针对任职士官计算机水平与部队信息化建设要求不相适应的现实问题,深入调查分析了某部队任职士官计算机水平的现状与实际需求,明确了士官任职教育计算机教学的目标,进而有针对性地提出了任职士官计算机课程教学改革的几点新思路,确保课程教学真正服务于部队,服务于实战。     

Preparation and characterization of linear low‐density polyethylene/low‐density polyethylene/TiO2 membranes

Because of their special functions, the application of nanoscale powders has recently attracted both industrial and theoretical interest. In this study, nanoscale TiO₂, which exhibited a special UV absorption and consequent antibacterial function, was added to a low‐density polyethylene/linear low‐density polyethylene hybrid by melt compounding to yield functional composite membranes. TiO₂ exhibited an apparent induced nucleation effect on the crystallization of polyethylene, and the size of the crystallites decreased while the number increaed with the introduction of TiO₂; however, the crystallinity of polyethylene changed little. Also, TiO₂ exhibited an ideal dispersion in the membrane with an average size less than 100 nm, and this excellent dispersion provided the membranes extra UV absorption; moreover, the transparency of the membranes was maintained to satisfy common requirements. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 216–221, 2005     

聚丙烯工程化研究

采用纳米填充、交联和转晶的复合技术对聚丙烯进行了改性，优选了纳米碳酸钙为填料。当β成核剂用量为0．5％、助交联剂为3％时，复合材料的综合性能达到最好，接近普通工程塑料的各项力学性能。红外光谱分析和熔体质量流动速率的测定表明，复合材料体系产生了微交联；DSC分析发现，PP材料的聚集态结构中含有β球晶。     

人脸识别在远程登录中的应用

介绍了远程登录中使用人脸进行身份验证的方法,讨论了系统结构和关键技术,给出了实验结果．此方法采用奇异值分解和判别式KL投影提取特征,利用类内平均距离作为验证依据,适用于人脸样本数量不是很大的情况．实验证明,该系统具有较好的应用效果。     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.     

多视无人机影像环形拼接算法

由于多视无人机影像拼接时误差的传播和累计经常导致拼接图扭曲偏斜或者拼接的失败.针对这个问题提出了构建拼接环并以多级拼接作为辅助的拼接策略.首先将待拼接图像分为多组,每组中以环形方式进行拼接,然后利用SIFT进行匹配,RANSAC实现误匹配的去除,而后计算透视变换关系,最后通过平差方程将误差削弱.通过实拍无人机影像进行的拼接实验表明该方式可以有效减少累计误差的影响,提高拼接精度.该方法的提出可以作为影像拼接消除累计误差的有效方式之一.     

Influence of static pre-loading on the dynamic bending strength of concrete with particle element modeling

Experimental tests show that static pre-loading has a significant effect on the dynamic strength of concrete.Based on meso-scale particle element model,numerical simulations of dynamic bending tests with pre-loading are performed.Complete stress–strain relationships are then obtained.Significant increase in dynamic strength is found when the pre-loadings are imposed within the elastic limit of concrete.However,when the imposition of pre-loadings reaches the plastic or softening range,dynamic strengths may gradually decrease along with the increase in pre-loadings.The distribution of energy components and the failure modes are discussed to explain the mechanisms of the phenomena.