The long-term evolutions and the regional characteristics of atmospheric methane concentrations in Nagoya, 1983-1997

This study provides information on the long-term evolutions of the atmospheric methane (CH4) concentrations in Nagoya City, Japan, which were analyzed by using the continuous monitoring data observed at the eight observatory stations for 1983-1997. The 15-year records of the atmospheric CH4 concentrations were examined by means of a time-series analysis using a fast Fourier transform with a low-pass filter to elucidate the seasonal cycles and the long-term trends. The annual averages of the CH4 concentrations in Nagoya were 1.85 ppmv (parts per million by volume), 1.91 ppmv, and 1.90 ppmv in 1988, 1995 and 1997, respectively. Moreover, the annual average growth rate showed a drastic decrease from 17 ppbv (parts per billion by volume) year(-1) in 1992 to 2 ppbv year(-1) in 1993, and further down to 7 ppbv year(-1) in 1997. Comparison of the atmospheric CH4 records in Nagoya with those in global air of the northern hemisphere observed at Mauna Loa observatory in Hawaii, USA, allows us to estimate the excess concentration of CH4 in the urban atmosphere of Nagoya, which was 0.17 ppmv in 1988 and 0.15 ppmv in 1997. On a local scale, the atmospheric CH4 concentrations in the northern part of Nagoya City increased until 1992 and then gradually decreased from 1993 to 1997, although those in the south-western urban areas constantly increased at the averaged growth rate of 13 ppbv year(-1) for 1988-1997. The variation of the long-term trends of the CH4 concentrations in Nagoya may be ascribed to the emission changes from the CH4 sources due to the human activities such as waste dumping and landfills.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Substrate Stimulated Orientation for Pure Aluminum

Oriented materials are of great importance, but their formation is rarely described. Here, nine Al/Al₂O₃ systems were designed to identify the dominant factors. Electron back-scattered diffraction indicates that the new Al crystal(s) with one or multiple orientation(s) can be stimulated by one single-crystal Al₂O₃ substrates. Synchrotron radiation diffraction shows that the preferred orientation(s) is/are determined based on the initial stage of the liquid–solid transition. The nonpreferred orientation can be suppressed through competition.

     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...     

Removal of Lissamine Red From Wastewater Using Waste Materials

Feasibility of a waste material, flyash, as a material for purification of wastewater containing Lissamine Red has been studied. Effects of time and concentration, temperature and pH on the removal of the dye have been studied. Lower concentrations favour the uptake of dye from water and the maximum removal was observed at a dye concentration of 20 mgL m 1 , 30°C, pH of 7 and adsorbent particle size of 53 µm. Dynamics of the uptake was studied using Lagergren's equation. The mass transfer coefficient was found to be 0.05 cmmin m 1 at a concentration of 20 mgL m 1 , 30°C and 53 µm particle size.     

Collapse analysis of real RC spatial structures using known failure schemes of ferro‐cement shell models

Large‐span reinforced concrete (RC) shells collapses that occurred in the last decade caused many death toll as well as significant losses to national economies. The most famous cases were the collapse of the aqua park cover in Moscow on February 2004 and the 2E terminal roof destruction at Charles de Gaulle Airport near Paris on May 2004. Following the publications of the appropriate commissions that have studied the reasons of these events, the influence of concrete creep and changes in the shell geometry on buckling of RC thin‐walled shells was not properly considered in the design. This study is focused on buckling of such shells, taking into account geometrical and physical nonlinear behaviour of compressed concrete. Other important reasons of concrete shells collapse are also analysed. The study is based on available experimental and theoretical investigations of ferro‐cement shells' models previously performed by the first author. The results of these investigations, obtained for small‐scale ferro‐cement models of thin‐walled shallow RC shells, are discussed. Behaviour of the tested models is compared with that of the above‐mentioned real shells and similar structures, which also collapsed. The critical buckling loads for the shells are obtained. It is shown that these loads are lower than the actual ones; thus, the shells buckling was unavoidable. To prevent brittle shell failure, they should be designed using other dominant failure modes that appear before the buckling. Possible failure schemes of real RC shells can be predicted using dominant failure modes obtained by laboratory testing of scaled models. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of Mathematical Modeling in Technology for the Recovery of Rubber from Latex in a Magnetic Field

Theoretical Foundations of Chemical Engineering - The paper presents a study of the process of the isolation of styrene-butadiene rubber from latex with the method of mathematical planning for a...     

Tuning of dielectric and ferroelectric properties in single phase BiFeO3 ceramics with controlled Fe/Fe ratio

Single phase multiferroic BiFeO₃ (BFO) ceramics were synthesized with controllable amount of Fe²⁺ and oxygen vacancies in a very wide concentration range. Double ferroelectric hysteresis loops are observed in fresh BFO ceramics at room temperature without any aging processes. Detailed study shows that this is due to the defect dipoles which have preferential orientations antiparallel to the direction of spontaneous polarization, providing a driving force for domain back-switching. The dielectric constant of BFO could be enormously enhanced by 100 times by increasing the Fe²⁺ content, employing a polaronic relaxation process.     

Palladium‐Catalyzed Three‐Component Reaction of 3‐(Tri‐n‐ butylstannyl)allyl Acetates,Aldehydes, and Triorganoboranes: An Alternative to the Carbonyl Allylation Using α,γ‐Substituted Allylic Tin Reagents

A three‐component reaction of 3‐(tri‐n‐butylstannyl)allyl acetates, aldehydes, and triorganoboranes in the presence of a palladium‐Xantphos catalyst system predominately gave (E)‐anti‐homoallylic alcohols with high diastereoselectivity and good to high levels of alkene stereocontrol. An efficient chirality transfer was observed when an enantioenriched substrate was employed. The reaction was initiated by the formation of an allylic gem‐palladium/stannyl intermediate, which subsequently underwent allylation of the aldehyde by an allyltributyltin followed by a coupling reaction of the in‐situ‐generated (E)‐vinylpalladium acetate with the triorganoborane.

     

Modeling and Optimization of the Effect of Sintering Parameters on the Hardness of Copper/Graphene Nanosheet Composites by Response Surface Methodology

Metal Science and Heat Treatment - Composites obtained by powder metallurgy from a mixture of copper powders and graphene nanosheets are studied. The response surface methodology is used to design...