Transcutaneous measurement and spectrum analysis of heart wallvibrations

For the noninvasive diagnosis of heart disease based on the acoustic and elastic characteristics of the heart muscle, it is necessary to transcutaneously measure small vibration signals, including components with an amplitude of less than 100 μm, from various parts of the heart wall continuously for periods of more than several heartbeats in a wide frequency range up to 1 kHz. Such measurement, however, has not been realized by any ultrasonic diagnostic methods or systems to date. By introducing the constraint least-square approach, this paper proposes a new method for accurately tracking the movement of the heart wall based on both the phase and magnitude of the demodulated signal to determine the instantaneous position of the object so that the vibration velocity of the moving object can be accurately estimated. By this method, small vibrations of the heart wall with small amplitudes less than 100 μm on the motion resulting from a heartbeat with large amplitude of 10 mm can be successfully detected with sufficient reproducibility in the frequency range up to several hundred Hertz continuously for periods of about 10 heartbeats. The resultant small vibration is analyzed not only in the time domain, but also in the frequency domain. As confirmed by the preliminary experiments herein reported, the new method offers potential for research in acoustical diagnosis of heart disease     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Oxygen absorption kinetics in YBa2Cu3Ox

The oxygen absorption process in highly aligned YBa₂Cu₃O_x samples in air and in pure oxygen was studied at several constant temperatures. The process can be expressed in two steps, a chemical reaction controlled step and a diffusion controlled step. The kinetic equations are as follows respectively:

(1 − a_t) ln(1 − a_t) + a_t = k_Dt

The activation energy was calculated using an Arrhenius equation. The technical conditions of heat treatment for oxygen absorption of highly aligned YBa₂Cu₃O_x crystals are discussed.     

Novel technique for SiO2 formed by liquid-phasedeposition for low-temperature processed polysilicon TFT

A technique for SiO₂ formation by liquid-phase deposition (LPD) at nearly room temperature for low-temperature processed (LTP) polysilicon thin-film transistor (poly-Si TFT) was developed. LPD SiO₂ film with a lower P-etch rate shows a dense structure. LPD SiO₂ also exhibits good electrical characteristics. LTP poly-Si thin-film transistors (TFTs) with LPD SiO ₂ as the gate insulator have been fabricated and investigated. Their characteristics indicate performance adequate for their use as pixel transistors in liquid crystal displays (LCDs)     

The importance of electrochemistry-related etching in thegate-groove fabrication for InAlAs/InGaAs HFETs

For the first time, the surface metal on nonalloyed ohmic electrodes is found to significantly change the profiles of gate grooves, when resist openings are employed to monitor drain current during wet-chemical gate recess for sub-micron InAlAs/lnGaAs heterojunction field-effect transistors (HFETs). The surface metal of Ni enhances the etching rate in comparison with that in the absence of electrodes by a factor of 4 and 10, laterally and vertically, which is favorable to fabricate deep gate grooves with small side etching. The Pt surface metal, however, leads to preferential etching of InGaAs over InAlAs, which can be useful to realize large side etching. The existence of an electrochemistry-related etching component, which arises when the ohmic electrodes are present during recess etching, is considered to be responsible for these behaviors     

Introducing computer tools into a first course in electricalengineering

At a school where engineering students have immediate access to a personal computer, it is important that they become familiar with that tool early in their studies. In introductory engineering courses it is also important that the students learn to perceive the computer as a tool and not as an end in itself. Achieving these goals requires a careful integration of computer usage into such courses by the instructors. In this paper we examine this issue in the context of a first course in electrical engineering that has been taught at the US Naval Academy, and we present specific examples of assignments we have used in our effort to accomplish these goals     

New fault locating system for air-insulated substations usingoptical current detector

The authors present the basic philosophy, construction, design features, and test results of a new fault locating system. This fault locating system helps to shorten the time required for restoration of service after the occurrence of a busbar fault in an air-insulated distribution substation. Recent optical and electronic technologies allow the design of a highly accurate and compact fault locating system which consists of optical current detectors using the Faraday effect and a fault locating processor using a digital data processing technique. The fault location is carried out by discriminating between the directions of zero-sequence currents. Through various tests and field operations, it has been confirmed that the system has sufficient performance for practical applications     

Overgrowth and DNA synthesis of neuroepithelium in embryonic stages of induced Long-Evans rat myeloschisis

Overgrowth of the myeloschisis, namely the excessive amount of the neural plate tissue, has been reported in the human myeloschisis. However, it is still debatable how the overgrowth develops and whether the overgrowth is the cause, or the secondary effect of spinal dysraphism. The author induced myeloschisis in the fetuses of Long-Evans rats by the administration of ethylenethiourea (ETU) to pregnant rats on day 10 of gestation. The fetuses were removed 1 hour after the treatment with bromodeoxyuridine (BrdU) to the dams on day 14 and 21. The fetuses were fixed in alcohol and embedded in paraffin. H-E staining and the immunohistologic examination were performed on the staining patterns to anti-neurofilament (NFP), anti-glial fibrillary acidic protein (GFAP) and anti-BrdU antibody by ABC method. On day 14, the lateral portion of everted neural plate showed a loose arrangement of cells and there was rosette formation in the mesoderm. On day 21, cell necrosis was observed at the dorsolateral portion of myeloschisis, although the ventral portion showed almost normal cytoarchitecture and was positive to NFP and GFAP. The cause of myeloschisis in this model is supposed to be the local and direct cytotoxic effect of ETU to neuro-ectodermal junction. On day 14, control animals contained few BrdU-incorporated cells at the basal plate of neural tube. In contrast, everted neural plate showed an active uptake of BrdU diffusely in the subependymal matrix layer cells. Overgrowth was not yet identified. On day 21, overgrowth of myeloschisis was found in spite of a few positive cells to BrdU which was identical to the control animals. These findings seem to suggest that cells in the myeloschisis retain their ability of DNA synthesis for longer periods of development and overgrowth found on day 21 is possibly a secondary effect of spinal dysraphism in this model.