Parametric study of the electrical to thermal power conversion in an inductively coupledrf plasma torch

An inductively coupled (ic) radio-frequency (rf) stabilized argon plasma was generated in a quartz tube using a 7 MHzrf generator. The electrical and thermal powers were measured and the efficiency of energy conversion was computed. The results indicate that for a constant power input, there is an optimum argon flow rate for which maximum energy conversion efficiency occurs.     

Copper coating on carbon fibres and their composites with aluminium matrix

A uniform and continuous coating of copper was given to carbon fibres by cementation or electroless techniques. In both cases, when coating thicknesses were less than 0.2 m, copper deposition was discontinuous over the fibres, and above 0.2 m, coatings were continuous. In electroless coating, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.5 m and above this showed isolated dendrite deposits of copper. In the cementation process, about 75% of the continuously coated fibres had a coating thickness range 0.2–0.6 m, and above this thickness, fine crystallite-type copper deposition was found over smoothly coated copper. The ultimate tensile strength of continuously electroless-coated fibres were nearer to the uncoated fibres, suggesting defect-free coating, while fibres coated by the cementation process exhibited lower ultimate tensile strength values. The tensile fracture of both electroless- and cementation-coated fibres showed delamination of the coating, suggesting poor bonding between coating and the fibre. In composites, prepared by dispersing the coated chopped fibres in a pure aluminium matrix, uniform and random distribution of the fibres were observed without appreciable fibre-metal interaction. The CuAl₂ intermetallics were largely found in the matrix and only very small amounts were observed at fibre/matrix interfaces. Additions of about 2 wt% Mg to the matrix prior to the fibre dispersion did not appreciably change the distribution pattern of the fibres, but in addition to CuAl₂ phase, Mg₂Si phases were observed in the matrix as well as at the interface.     

石墨防爆片静态变形及应力分析

本文旨在通过对石墨防爆片的变形、应力分布及爆破压力的试验研究,探讨以石墨电极为原材料加工石墨防爆片的可行性。文中运用有限单元法及薄板理论对该防爆破片的应力分布做了初步分析,并以电测和爆破试验验证了以薄板理论为基础的爆破压力计算公式,可供进一步研究时参考。     

Multipath effects on vector tracking algorithm for GNSS signal

The vector tracking algorithm uses a single extended Kalman filter （EKF） to predict the time-delays and the Doppler deviations of the GNSS signal, while also estimating the user＇s position, velocity, and clock state. In this paper, the effects of multipath on the tracking performance of the vector delay / frequency lock loop （VDFLL） is studied for better application in the multipath environment. The error expressions of the measurements are given in theory. The tracking error caused by multipath is reduced by VDFLL, which is proved by the tracking error of VDFLL through a new iterating method. The theoretical analysis is verified by the Monte Carlo simulation.     

Bare finger 3D air‐touch system with embedded multiwavelength optical sensor arrays for mobile 3D displays

A camera‐free 3D air‐touch system was proposed. Hovering, air swiping, and 3D gestures for further interaction with the floated 3D images on the mobile display were demonstrated. By embedding multiwavelength optical sensors into the display pixels and adding angular‐scanning illuminators with multiwavelength on the edge of the display, the flat panel can sense images reflected by a bare finger from different heights. In addition, three axis (x, y, z) information of the reflected image of the fingertip can be calculated. Finally, the proposed 3D air‐touch system was successfully demonstrated on a 4‐inch mobile 3D display.     

Goaling recognition based on intelligent analysis of real-time basketball image of Internet of Things

The Journal of Supercomputing - This research aims to study the goaling recognition methods based on the intelligent analysis of real-time basketball images of the Internet of Things, so as to...     

Biosynthesis of γ ‐Fe2 O3 @CuO core–shell nanoclusters using aqueous extract of Sesbania grandiflora Linn fresh leaves,its characterisation,and antimicrobial activity studies against Staphylococcus aureus strains

The present study reports an eco‐friendly and rapid method for the synthesis of core–shell nanoclusters using the modified reverse micelle method. It is a green synthetic method which uses Sesbania grandiflora Linn extract which acts as a reducing and capping agent. It is observed that this method is very fast and convenient and the nanoclusters are formed with 5–10 min of the reaction time without using harsh conditions. The core–shell nanoclusters so prepared were characterised using UV–Vis spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy. Further, their effective antibacterial activity towards the gram‐positive bacteria Staphylococcus aureus was found to be due to their smaller particle size.Inspec keywords: iron compounds, copper compounds, nanoparticles, particle size, nanofabrication, nanomedicine, biomedical materials, core‐shell nanostructures, antibacterial activity, ultraviolet spectra, visible spectra, microorganisms, reduction (chemical), scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectraOther keywords: biosynthesis, γ‐Fe₂ O₃ ‐CuO core‐shell nanoclusters, aqueous extract, Sesbania grandiflora Linn fresh leaves, antimicrobial activity, Staphylococcus aureus strains, eco‐friendly method, modified reverse micelle method, green synthetic method, reducing agent, capping agent, UV‐visible spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, antibacterial activity, gram‐positive bacteria Staphylococcus aureus, particle size, time 5 min to 10 min, Fe₂ O₃ ‐CuO