Dual-window dual-bandwidth spectroscopic optical coherence tomography metric for qualitative scatterer size differentiation in tissues

This study investigates the autocorrelation bandwidths of dual-window (DW) optical coherence tomography (OCT) k-space scattering profile of different-sized microspheres and their correlation to scatterer size. A dual-bandwidth spectroscopic metric defined as the ratio of the 10% to 90% autocorrelation bandwidths is found to change monotonically with microsphere size and gives the best contrast enhancement for scatterer size differentiation in the resulting spectroscopic image. A simulation model supports the experimental results and revealed a tradeoff between the smallest detectable scatterer size and the maximum scatterer size in the linear range of the dual-window dual-bandwidth (DWDB) metric, which depends on the choice of the light source optical bandwidth. Spectroscopic OCT (SOCT) images of microspheres and tonsil tissue samples based on the proposed DWDB metric showed clear differentiation between different-sized scatterers as compared to those derived from conventional short-time Fourier transform metrics. The DWDB metric significantly improves the contrast in SOCT imaging and can aid the visualization and identification of dissimilar scatterer size in a sample. Potential applications include the early detection of cell nuclear changes in tissue carcinogenesis, the monitoring of healing tendons, and cell proliferation in tissue scaffolds.     

First Harmonic (2f) Characterisation of Resonant Frequency and Q-Factor of Micromechanical Transducers

In this paper, the response to the first harmonic component (2f) of the electrostatic force in single terminal driven electrostatic comb-drive and parallel-plate drive was used as a signal to extract device parameters, namely, the Q-factor and resonant frequency instead of the fundamental (1f) resonance response. It is shown that the difficulty in motional measurement due to electrical cross-talk (parasitics) using 1f measurement can be overcome with a higher signal-to-noise ratio of the 2f signal. Both atmospheric (low-Q) and reduced pressure environment were investigated using off-chip electronics and lock-in amplifier. The measurements were done on the electrostatic comb-drive and capacitive parallel plate sensing plates that form the two core modules of a yaw rate sensor (dual-axis resonator). The effects of AC and DC bias voltages on the measured response have been investigated. Experimental amplitude and phase response data have been analysed using the Lorentzian curve-fit, Resonance Curve Area (RCA) method, the half-power bandwidth method (3 dB) and the Nyquist plot for data fitting and determination of the Q-factor and resonance frequency.     

Analytical design of 3-D wavelet filter banks using themultivariate Bernstein polynomial

The design of 3-D multirate filter banks where the downsampling/upsampling is on the FCO (face centred orthorhombic) lattice is addressed. With such a sampling lattice, the ideal 3-D sub-band of the low-pass filter is of the TRO (truncated octahedron) shape. The transformation of variables has been shown previously to be an effective technique for designing M-D (multidimensional) filter banks. A design technique is presented for the transformation function using the multivariate Bernstein polynomial which provides a good approximation to the TRO sub-band shape. The method is analytically based and does not require any optimisation procedure. Closed form expressions are obtained for the filters of any order. Another advantage of this technique is that it yields filters with a flat frequency response at the aliasing frequency (ω₁, ω₂ , ω₃)=(π, π, π). This flatness is important for giving regular discrete wavelet transform systems     

Interface Reaction Between Electroless Ni–Sn–P Metallization and Lead-Free Sn–3.5Ag Solder with Suppressed Ni3P Formation

The voids formed in the Ni₃P layer during reaction between Sn-based solders and electroless Ni–P metallization is an important cause of rapid degradation of solder joint reliability. In this study, to suppress formation of the Ni₃P phase, an electrolessly plated Ni–Sn–P alloy (6–7 wt.% P and 19–21 wt.% Sn) was developed to replace Ni–P. The interfacial microstructure of electroless Ni–Sn–P/Sn–3.5Ag solder joints was investigated after reflow and solid-state aging. For comparison, the interfacial reaction in electroless Ni–P/Sn–3.5Ag solder joints under the same reflow and aging conditions was studied. It was found that the Ni–Sn–P metallization is consumed much more slowly than the Ni–P metallization during soldering. After prolonged reaction, no Ni₃P or voids are observed under SEM at the Ni–Sn–P/Sn–3.5Ag interface. Two main intermetallic compounds, Ni₃Sn₄ and Ni₁₃Sn₈P₃, are formed during the soldering reaction. The reason for Ni₃P phase suppression and the overall mechanisms of reaction at the Ni–Sn–P/Sn–3.5Ag interface are discussed.     

测试与最后工序之融合

目前,半导体工业正以飞快速度不断发展变化。面对成本压力和新封装技术,制造业和设备供货商们在设备能力、工艺和自动控制方面持续不断地加以更新和改进。在测试与最后工序领域中,成功的自动化解决方案是使测试与最后工序相结合,即从根本上转变它的设计形式而大幅度提高效率。它不仅包括大量已封装好的独立组件及高平行性的测试系统,也包括合并高速的最后工序系统。     

Nano and Microtechnologies for the Study of Magnetotactic Bacteria

Magnetotactic bacteria (MTB) naturally synthesize magnetic nanoparticles that are wrapped in lipid membranes. These membrane‐bound particles, which are known as magnetosomes, are characterized by their narrow size distribution, high colloidal stability, and homogenous magnetic properties. These characteristics of magnetosomes confer them with significant value as materials for biomedical and industrial applications. MTB are also a model system to study key biological questions relating to formation of bacterial organelles, metal homeostasis, biomineralization, and magnetoaerotaxis. The similar size scale of nano and microfluidic systems to MTB and ease of coupling to local magnetic fields make them especially useful to study and analyze MTB. In this Review, a summary of nano‐ and microtechnologies that are developed for purposes such as MTB sorting, genetic engineering, and motility assays is provided. The use of existing platforms that can be adapted for large‐scale MTB processing including microfluidic bioreactors is also described. As this is a relatively new field, future synergistic research directions coupling MTB, and nano‐ and microfluidics are also suggested. It is hoped that this Review could start to bridge scientific communities and jump‐start new ideas in MTB research that can be made possible with nano‐ and microfluidic technologies.     

Hexagonal Boron Nitride Thin Film for Flexible Resistive Memory Applications

Hexagonal boron nitride (hBN), which is a 2D layered dielectric material, sometimes referred as “white graphene” due to its structural similarity with graphene, has attracted much attention due to its fascinating physical properties. Here, for the first time the use of chemical vapor deposition ‐grown hBN films to fabricate ultrathin (≈3 nm) flexible hBN‐based resistive switching memory device is reported, and the switching mechanism through conductive atomic force microscopy and ex situ transmission electron microscopy is studied. The hBN‐based resistive memory exhibits reproducible switching endurance, long retention time, and the capability to operate under extreme bending conditions. Contrary to the conventional electrochemical metallization theory, the conductive filament is found to commence its growth from the anode to cathode. This work provides an important step for broadening and deepening the understanding on the switching mechanism in filament‐based resistive memories and propels the 2D material application in the resistive memory in future computing systems.     

Performance of isolated rat hearts perfused with helium- or nitrogen-containing, gas-saturated solutions

Effects of helium on the isolated perfused rat heart were studied employing the Langendorff technique. The perfusate consisted of Krebs-Henseleit solution saturated with one of three gas mixtures: 1) 95% O2-5% CO2, 2) 50% O2-45% He-5% CO2, and 3) 50% o2-45% N2-5% CO2. Contractile indices measured revealed the performance of hearts with the helium mixture to be equivalent to those perfused with the 95% O2-5% CO2 mixture. Those perfused with the nitrogen gas mixture exhibited contractile activity lower than that in the other two groups. It was concluded that helium exerts a direct effect on the coronary vasculature of the isolated rat heart by reducing its resistance to flow. A greater oxygen delivery to hearts perfused with the He-saturated solution compared to the N2-perfused hearts may account for the difference in performance.     

Anti‐inflammatory properties of high pressure‐assisted extracts of Grifola frondosa in lipopolysaccharide‐activated RAW 264.7 macrophages

The aim of this study was to determine the in vitro anti‐inflammatory properties of the shake extract (SE) and the high pressure‐assisted extract (PE) of the mycelia of Grifola frondosa in a lipopolysaccharide‐stimulated RAW 264.7 macrophage model. The content of total polysaccharides and β‐glucans of PE at 600 MPa (PE‐600) was 41.2 and 6.2 mg g^?1 dry weight, respectively, which were significantly higher than SE extracts. The results showed that treatment with 500 μg mL^?1 of PE by 600 MPa (PE‐600) did not reduce RAW 264.7 cell viability but did significantly inhibit the production of LPS‐induced NO, PGE₂ and intracellular ROS. The PE‐600 inhibited the activation of NF‐kB and then reduced the production of LPS‐induced TNF‐α, IL‐6 and IL‐1β in a dose‐dependent manner. Thus, the PE could be used as an alternative extraction method for improving the extraction efficacy of G. frondosa and serve as an alternative source of anti‐inflammatory agents.