地源热泵的地热能利用方式与工程运用

地源热泵是一种新型的高效、节能、环保的空调系统 ,是我国调整能源利用结构 ,发展利用可再生能源策略的重点推广项目之一。本文介绍了地源热泵的工作原理及四种地热能利用方式。根据笔者的设计经验 ,为地源热泵空调系统的工程设计和推广应用提供了一些设计参数和参考意见     

ZnO薄膜应用的最新研究进展

ZnO是一种新型的Ⅱ-Ⅵ族半导体材料。详细介绍了ZnO薄膜在太阳能电池、表面声波器件、气敏元件、压敏器件等领域的应用以及在紫外探测器、LED、LD等潜在应用领域研究开发的最新进展。     

鼻咽癌药物我成像定位仪的光学设计

对药物荧光鼻咽癌定位的光学系统进行理论分析，给出了该系统的光学设计方法和设计结果。光学系统设计包括，激光器出射光束与光纤高效率耦合技术，同光轴非接触两光纤间的光束耦合技术以及获得较好的像清晰度和衬度的技术。     

一种新型冰箱测试系统设计与应用

介绍了一种用于冰箱检测的新型测试系统，并在WIN98环境下用VB6．0实现该系统软件。该系统可以同时对四台冰箱的温度参数及其中一台冰箱的耗电量进行检测，该系统具有成本低，性能稳定的优点。     

光学分数傅里叶逆变换的无透镜模式

用波前相因子判断法，将球面波照明物体的自由空间菲涅耳衍射光场分布与分数傅里叶逆变换的标准频谱分布进行位相比较，提供了广义条件下光学分数傅里叶逆变换的无透镜模式，给出其光学实现基本单元参量选择的判定法则，计算机模拟实验证明了结论的可靠与可行。     

利用最小熵法预测高频拓宽频带

本根据最小熵观点给出了预测高频成分拓宽频带的方法，实际效果表明，该方法是一种拓宽频带的有效方法。     

Stored energy analysis of Zn—5Al eutectic alloy in superplastic deformation

The stored energy and the energy release during SPD(superplastic deformation)of a Zn-5Al alloy were studied.The alloy after rolling process gains more stored energy,and the as-rolled speciment can obtain maximum elongation and minimum flow stress without hot loding treatment before SPD.Experimental results show that stroed energy release process is along with SPD process and is also an impetus to SPD.The as -rolled Zn-5Al alloy has 48J/mol stored energy which was measured with DSC(differential scanning calorimeter)and conforms well to the calcuated value.The as-rolled Zn-5Al alloy after SPD with an elongation of 2500% releases 112J/mol stored energy,Analysis shows that the strain rate is in direct ratio to the rate of stred energy release.     

一种基于神经网络的模糊推理方法

对于Zadeh的模糊关系合成法则（简称CRI方法），选择一个适宜蕴涵关系矩阵是至关重要的。通常蕴涵关系矩阵的元素值是通过一个所构造的数学表达式计算的，或是由领域专家凭经验直接给出。然而，有时，特别是对于后一种情形，CRI法不能满足模糊推理最基本的一致性要求。文章构造了一个神经网络用于模糊推理，新方法不仅是CRI方法的推广，而且远比CRI方法易于满足推理的一致性要求。得益于神经网络的长处，新方法具有灵活性、可调性。文章给出了权值的具取值法。     

转运站框架式厂房的爆破拆除

合山电厂转运站待拆五层钢筋混凝土框架式厂房西侧与被保护的引风机房相隔仅 0 3m ,北侧与工具房相连 ,南侧与需要保护的油池相邻。爆破切口布置在二层 ,并把最后一排柱的爆破部位提高到引风机房顶部以上 0 5m处 ,避免了后坐对引风机房的影响。通过预处理 ,将厂房与工具房分离。架设防护结构 ,阻挡飞石 ,保护了油池。文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。     

Least mean p-power error criterion for adaptive FIR filter

An adaptive FIR filter based on the least mean p-power error (MPE) criterion is investigated. First, some useful properties of MPE function are studied. Three main results are as follows: 1) MPE function is a convex function of filter coefficients; so it has no local minima. 2) When input process and desired process are both Gaussian processes, then MPE function has the same optimum solution as the conventional Wiener solution for any p. 3) When input process and desired process are non-Gaussian processes, then MPE function may have better optimum solution than Wiener solution. Next, a least mean p-power (LMP) error adaptive algorithm is derived and some application examples are presented. Consequently, when the signal is corrupted by an impulsive noise, the adaptive algorithm with p=1 is preferred. Furthermore, when the signal is corrupted by noise or interference, the adaptive algorithm with proper choice of p may be preferred