Characterization of trace metals in vegetables by graphite furnace atomic absorption spectrometry after closed vessel microwave digestion

A simple and expeditious method for the determination of trace metals (cadmium, chromium, copper, manganese and lead) is proposed. The metals are extracted from their matrix by using nitric acid and hydrogen peroxide in a closed-vessel microwave digestion system for their subsequent detection by graphite furnace atomic absorption spectrometry (GFAAS). The sample preparation procedure facilitates the overall analytical process and enables the construction of calibration curves from inorganic standards. The ensuing method provides good linearity and sensitivity for the five metals, with limits of detection and quantization spanning the ranges 0.05–2.20 and 0.15–7.34 μg/kg, respectively. This sensitivity level is quite appropriate for the intended application. Accuracy was assessed by using a certified reference material (NCS ZC85006 Tomato), for which the proposed method provided amounts of metals consistent with their certified values. The proposed method was applied to tomato, pepper and onion, which are widely consumed in Mediterranean countries.     

Partial Characterization of Ultrafiltrated Soy Protein Hydrolysates with Antioxidant and Free Radical Scavenging Activities

Soy protein isolate (SPI) was hydrolyzed with Flavourzyme® (SHF) or chymotrypsin (SHC). Hydrolysates were sequencially fractionated by ultrafiltration using different membrane pore sizes (50, 10, and 3 kDa). The antioxidant ability of each hydrolysate protein fraction was tested in a liposome oxidizing system and their free radical scavenging activity (FRSA) was evaluated with the DPPH method (diphenylpicrilhydrazine radical). Molecular weight (MW) distribution, solubility, surface hydrophobicity, and amino acid composition of each SPI hydrolysate fraction were measured and their effect on antioxidant and scavenging activities was established by multivariate correlation. The most active ultrafiltrated peptide fractions (P < 0.05), from SHF and SHC, had of MW of <3 kDa (F3 and C3, respectively). These fractions decreased liposome oxidation by 83.2% and 84.5%, respectively, and also showed the highest FRSA (F3: 21.3% and C3: 24.4%). In addition to molecular size, the antioxidant activity and FRSA of soy protein fractions were related to their amino acid composition, especially to an increased content of Phe and a lowered content of Lys. Also, hydrophobicity of ultrafiltrated peptide fractions was an important characteristic (P < 0.001) associated with their ability to trap free radicals. Ultrafiltered peptide fractions with low MW have a high potential to be used as natural alternatives to prevent lipid oxidation in foods.     

Ochratoxigenic moulds and effectiveness of grape field antifungals in a climatic change scenario

BACKGROUND: The presence of ochratoxin A (OTA) in grapes and grape derivatives has been reported mainly in the Mediterranean area. Consequently, great efforts are being made to prevent the growth of Aspergillus on grapes. However, the European Commission suggests that climate change may result in increased temperatures and longer drought periods in southern Europe. Therefore the aim of this study was to investigate how ochratoxigenic fungal growth and the efficiency of fungicides used at present might be affected by environmental conditions predicted with climate change. RESULTS: The effectiveness of grape field antifungals (Switch, Flint Max and Equisetum arvense extract) under two alternating temperature, photoperiod and relative humidity (RH) scenarios (current: 20/30 °C, 16 h light/8 h darkness, 80% RH; predicted: 25/37 °C, 16 h light/8 h darkness, 75% RH) on the growth and OTA production of two Aspergillus carbonarius isolates and one Aspergillus ochraceus isolate on grapes was investigated. CONCLUSION: Predicted conditions reduced A. carbonarius and limited A. ochraceus growth. Antifungals reduced fungal infection (by 40‐84%), although no correlation between climatic conditions and effectiveness of the antifungals was found. However, Switch always showed the greatest reduction and E. arvense (0.02 g mL^?1 extract) the least. Higher temperatures affected OTA production by the isolates in different ways. In general, Switch and Flint Max reduced OTA production, while E. arvense stimulated it. Copyright © 2011 Society of Chemical Industry     

Impact of cycling temperatures on Fusarium verticillioides and Fusarium graminearum growth and mycotoxins production in soybean

BACKGROUND: Fusarium graminearum and F. verticillioides are two very important mycotoxigenic species as they cause diverse diseases in crops. The effects of constant and cycling temperatures on growth and mycotoxin production of these species were studied on soybean based medium and on irradiated soya beans. RESULTS: F. graminearum grew better when was incubated at 15, 20 and 15–20 °C (isothermal or cycling temperature) during 21 days of incubation. Maximum levels of zearalenone and deoxynivalenol (39.25 and 1040.4 µg g^?1, respectively) were detected on soya beans after 15 days of incubation and the optimal temperature for mycotoxin production was 15 °C for zearalenone and 20 °C for deoxynivalenol. F. verticillioides grew better at 25 °C in culture medium and at 15/20 °C and 15/25 °C on soybean seeds. Fumonisin B₁ was produced only in culture medium, and the maximum level (7.38 µg g^?1) was found at 15 °C after 7 days of incubation. CONCLUSION: When growth and mycotoxin production under cycling temperatures were predicted from the results under constant conditions, observed values were different from calculated for both species and substrate medium. Therefore, care should be taken if data at constant temperature conditions are to be extrapolated to real field conditions. Copyright © 2012 Society of Chemical Industry     

Intra- and interspecific mineral composition variability of commercial instant coffees and coffee substitutes: Contribution to mineral intake

The present paper reports the amount and estimated daily mineral intake of nine elements (Ca, Mg, K, Na, P, Fe, Mn, Cr and Ni) in commercial instant coffees and coffee substitutes (n = 49). Elements were quantified by high-resolution continuum source flame (HR-CS-FAAS) and graphite furnace (HR-CS-GFAAS) atomic absorption spectrometry, while phosphorous was evaluated by a standard vanadomolybdophosphoric acid colorimetric method.Instant coffees and coffee substitutes are rich in K, Mg and P (>100 mg/100 g dw), contain Na, Ca and Fe in moderate amounts (>1 mg/100 g), and trace levels of Cr and Ni. Among the samples analysed, plain instant coffees are richer in minerals (p < 0.001), except for Na and Cr. Blends of coffee substitutes (barley, malt, chicory and rye) with coffee (20–66%) present intermediate amounts, while lower quantities are found in substitutes without coffee, particularly in barley.From a nutritional point of view the results indicate that the mean ingestion of two instant beverages per day (total of 4 g instant powder), either with or without coffee, cannot be regarded as important sources of minerals to the human diet, although providing a supplementation of some minerals, particularly Mg and Mn in instant coffees. Additionally, and for authentication purposes, the correlations observed between some elements and the coffee percentage in the blends, with particular significance for Mg amounts, provides a potential tool for the estimation of coffee in substitute blends.     

Double emulsions (W/O/W): physical characteristics and perceived intensity of salty taste

This study addressed the correlation between physical characteristics of double emulsions and sensory perception, as the microstructure of these systems may provide the mechanism to understanding the initial cause of the altered salty taste. Thus, double emulsions (W/O/W) were prepared using different volumes of the internal aqueous phase while maintaining the same fat and sodium contents in the evaluated systems. Polyglycerol polyricinoleate (PGPR) and tween 80 were used as hydrophobic and hydrophilic emulsifiers, respectively. After preparation, the samples were stored at 25 °C for 4 days and submitted to analysis of optical microscopy, distribution and polydispersity of the oil droplets size, electrical conductivity, rheological behaviour and sensorial analysis. It was found that the use of different emulsifier concentrations (PGPR) did not influence the physical characteristics of the emulsions with the same formulation, but emulsions with different internal aqueous phase concentrations presented different results. These distinct characteristics may have influenced sensorial perception, as the emulsion with higher internal phase concentration was considered saltier. Thus, it can be concluded that structural differences of the double emulsions can be used to decrease the sodium contents without perceivable changes in salty taste.     

Vacuum impregnation of chitosan‐based edible coating in minimally processed pumpkin

The goal of this research was to evaluate the use of vacuum impregnation (VI) and soaking techniques (ST) in the application of edible coatings of chitosan and chitosan + lauric acid to minimally processed pumpkins (MPP). The vacuum impregnation method led to greater component incorporation (5.9% and 1.75%, respectively) in the pumpkins when compared to soaking and consequently the formation of more uniform, thicker coatings (25.6 and 22.3 μm, respectively). However, VI caused greater changes in pH, acidity, colour and firmness. Relating to water content and carotenoid content, noncoated pumpkins presented greater losses during the storage period, regardless of impregnation method. The pumpkins with edible coatings, regardless of method, presented lower numbers of psychrotrophic micro‐organisms and coliforms during the storage period. Therefore, soaking was considered the best method for the application of chitosan‐based edible coatings to minimally processed pumpkins, as it led to smaller changes in the properties of the product.     

Design of whey protein nanostructures for incorporation and release of nutraceutical compounds in food

Whey proteins are widely used as nutritional and functional ingredients in formulated foods because they are relatively inexpensive, generally recognized as safe (GRAS) ingredient, and possess important biological, physical, and chemical functionalities. Denaturation and aggregation behavior of these proteins is of particular relevance toward manufacture of novel nanostructures with a number of potential uses. When these processes are properly engineered and controlled, whey proteins may be formed into nanohydrogels, nanofibrils, or nanotubes and be used as carrier of bioactive compounds. This review intends to discuss the latest understandings of nanoscale phenomena of whey protein denaturation and aggregation that may contribute for the design of protein nanostructures. Whey protein aggregation and gelation pathways under different processing and environmental conditions such as microwave heating, high voltage, and moderate electrical fields, high pressure, temperature, pH, and ionic strength were critically assessed. Moreover, several potential applications of nanohydrogels, nanofibrils, and nanotubes for controlled release of nutraceutical compounds (e.g. probiotics, vitamins, antioxidants, and peptides) were also included. Controlling the size of protein networks at nanoscale through application of different processing and environmental conditions can open perspectives for development of nanostructures with new or improved functionalities for incorporation and release of nutraceuticals in food matrices.