Development of polarization ratio model for sea surface wind field retrieval from TerraSAR-X HH polarization data

In this article, the polarization ratio (PR) of TerraSAR-X (TS-X) vertical–vertical (VV) and horizontal–horizontal (HH) polarization data acquired over the ocean is investigated. Similar to the PR of C-band synthetic aperture radar (SAR), the PR of X-band SAR data also shows significant dependence on incidence angle. The normalized radar cross-section (NRCS) in VV polarization data is generally larger than that in HH polarization for incidence angles above 23°. Based on the analysis, two PR models proposed for C-band SAR were retuned using TS-X dual-polarization data. A new PR model, called X-PR hereafter, is proposed as well to convert the NRCS of TS-X in HH polarization to that in VV polarization. By using the developed geophysical model functions of XMOD1 and XMOD2 and the tuned PR models, the sea surface field is retrieved from the TS-X data in HH polarization. The comparisons with in situ buoy measurements show that the combination of XMOD2 and X-PR models yields a good retrieval with a root mean square error (RMSE) of 2.03 m s^–1 and scatter index (SI) of 22.4%. A further comparison with a high-resolution analysis wind model in the North Sea is also presented, which shows better agreement with RMSE of 1.76 m s^–1 and SI of 20.3%. We also find that the difference between the fitting of the X-PR model and the PR derived from TS-X dual-polarization data is close to a constant. By adding the constant to the X-PR model, the accuracy of HH polarization sea surface wind speed is further improved with the bias reduced by 0.3 m s^–1. A case acquired at the offshore wind farm in the East China Sea further demonstrates that the improvement tends to be more effective for incidence angles above 40°.     

Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution

The corrosion behavior of pure aluminum in inhibited and uninhibited 4 MKOH was investigated by means of hydrogen collection, polarization curve measurement and electrochemical impedance spectroscopy (EIS). The results showed that the corrosion of pure aluminum was greatly inhibited by the addition of ZnO and dimethyl amine epoxy propane (designated as DE). EIS and EDAX analyses revealed that ZnO produces its effect by depositing on the aluminum surface, which increases the overpotential of hydrogen evolution. It was also found that the addition of DE could greatly improve the deposition of zinc layers.     

多核DSP的以太网远程程序加载方法

为了解决工业远程控制设备的软件更新带来的成本和效率问题,在研究了以TMS320C6670为核心的DSP系统的结构和程序启动的基础上,提出了基于以太网的DSP程序远程加载方法。该方法主要基于BOOTP协议的广播和以太网UDP协议实现。实践表明,该加载技术灵活可靠,为远程控制系统的调试和更新提供了便利。     

The design and analysis of unequal error protection fountain coding for multiple source networks over binary erasure channels

A novel network model of multiple source fountain coding is developed and a novel class of generic multiple source fountain codes with unequal error protection(UEP)property is proposed.The And–Or tree analysis technique is generalized to analyze the asymptotic performance of the proposed codes and a joint optimization method employing both linear and nonlinear programs is developed to optimize the degree distributions.Furthermore,we propose three basic methods to achieve UEP property and the performance of each method is discussed.We employ these analytical results and optimization method to design and discuss several UEP codes with two and four sources for different application scenarios.Simulation results verify that the proposed codes can be applied to the networks with any number of sources and can provide strong UEP property in various ways based on the proposed three basic methods.     

Preparation and characterization of polyelectrolyte copolymers containing methyl methacrylate and 2-hydroxyethyl methacrylate. I. Polymers based on methacrylic acid

Acidic polyelectrolyte copolymers containing 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were prepared by free radical polymerization to high conversion in solution. Copolymer yields were obtained by gravimetry (all in the 30–50% range), relative molecular weights estimated by intrinsic viscosity measurements (all in the 50–70 cc/g range), tacticity by ¹³C nuclear magnetic resonance (NMR) spectroscopy (all polymers predominantly syndiotactic with some atactic content), and composition by acid/base titrations in conjunction with ¹H-NMR spectroscopy (all close to the monomer charge ratios). Acid strengths or apparent pKa's were examined as a function of extent of ionization. Measurements performed in water indicated that the compact/extended coil transformation in predominantly syndiotactic polymethacrylic acid occurs also in copolymers of similar tacticity containing moderate to high concentrations of MAA. The apparent pKa of such polymers containing only small amounts of MAA did not vary with extent of ionization, indicating a low degree of interaction between the acid groups. In copolymer pairs containing similar amounts of MAA but differing HEMA and MMA contents, the polymer containing more HEMA appeared the stronger acid, presumably due to a better solvation of that polymer which would increase the net spatial charge–charge separation and decrease cooperative effects that lead to suppressed ionization.     

4G通信技术的FPGA远程更新系统设计

为了解决在恶劣环境、偏远地区等特殊场合的FPGA远程更新问题,提出了一种基于4G无线通信技术的FPGA远程更新系统设计方法。应用4G无线通信模块实现了更新控制器的通信组网,远程控制器通过4G网络与更新控制器建立通信连接,下发控制命令实现FPGA的远程更新。通过实际测试验证了新方法的可行性、正确性,有效弥补了传统更新方法布线复杂、效率低、距离短等不足,提高了设备维护效率、降低了维护成本,对工程应用具有重大意义。     

fMRI-based Decoding of Visual Information from Human Brain Activity: A Brief Review

Machine Intelligence Research - One of the most significant challenges in the neuroscience community is to understand how the human brain works. Recent progress in neuroimaging techniques have...     

基于国产处理器增量式实时交通流预测算法及实现

针对城市交通难以处理大量数据且实时性差等问题,提出了根据增量式城市交通流数据预测拥堵情况的一种基于国产处理器的L-BFGS(limited-memory BFGS)算法。该算法通过存储向量序列计算Hessian矩阵,改进Two-Loop算法求下降方向,在Spark集群中并行处理时收敛速度快,适用于实时性要求强的城市交通场景。实验结果证明,L-BFGS预测算法完全可以在国产平台上对大规模的实时交通数据流进行快速建模、预测,在改善城市交通管理水平提供有效支撑的同时也丰富了国产芯片的应用领域。     

Accelerated electrospark deposition and the wear behavior of coatings

Electrospark deposition (ESD) is a coating process that is featured by low heat input to the substrate. Low coating efficiency and other limitations influence its wider application. The present paper introduces newly designed ESD equipment, by which a higher coating rate can be reached. The relationship among coating thickness, surface roughness, and process parameters such as pulse energy, pulse frequency, and deposition time are presented. Electrospark deposition coating by the new equipment on AISI 1045 steel (with WC-8% Co as electrode) increases the wear resistance by 5 to 8 times. The micromechanism is investigated by scanning electron microscopy observation.     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.