H∞ Control with Transients for Singular Systems

In this paper, the problem of a generalized type of H_∞ control is investigated for continuous‐time singular systems, which treats a mixed attenuation of exogenous inputs and initial conditions. First, a performance measure that is essentially the worst‐case norm of the regulated outputs over all exogenous inputs and initial conditions is introduced. A necessary and sufficient condition is obtained to ensure the singular system to be admissible and the performance measure to be less than a prescribed scalar. Based on the criterion a sufficient condition for the existence of a state‐feedback controller is established in terms of linear matrix inequalities. Moreover, the relationship between the performance measure and the standard H_∞ norm of the system is provided. Two numerical examples are given to demonstrate the properties of the obtained results.     

A scalable, self-analyzing digital locking system for use on quantum optics experiments

Digital control of optics experiments has many advantages over analog control systems, specifically in terms of the scalability, cost, flexibility, and the integration of system information into one location. We present a digital control system, freely available for download online, specifically designed for quantum optics experiments that allows for automatic and sequential re-locking of optical components. We show how the inbuilt locking analysis tools, including a white-noise network analyzer, can be used to help optimize individual locks, and verify the long term stability of the digital system. Finally, we present an example of the benefits of digital locking for quantum optics by applying the code to a specific experiment used to characterize optical Schr?dinger cat states.     

A Stochastic Vehicle Routing Problem with Travel Time Uncertainty: Trade-Off Between Cost and Customer Service

On-time shipment delivery is critical for just-in-time production and quick response logistics. Due to uncertainties in travel and service times, on-time arrival probability of vehicles at customer locations can not be ensured. Therefore, on-time shipment delivery is a challenging job for carriers in congested road networks. In this paper, such on-time shipment delivery problems are formulated as a stochastic vehicle routing problem with soft time windows under travel and service time uncertainties. A new stochastic programming model is proposed to minimize carrier’s total cost, while guaranteeing a minimum on-time arrival probability at each customer location. The aim of this model is to find a good trade-off between carrier’s total cost and customer service level. To solve the proposed model, an iterated tabu search heuristic algorithm was developed, incorporating a route reduction mechanism. A discrete approximation method is proposed for generating arrival time distributions of vehicles in the presence of time windows. Several numerical examples were conducted to demonstrate the applicability of the proposed model and solution algorithm.     

A decision support system for environmental effects monitoring

The Environmental Effects Monitoring (EEM) Statistical Assessment Tool (SAT) Decision Support System (DSS) has been developed to provide a user-friendly data analysis, display and decision support tool for Canada's federal environmental effects monitoring program for the pulp and paper and mining industries. The target users include industries, consultants, regional EEM coordinators, National EEM Office and scientists involved in EEM-related research. The tool allows the assessment of the effects of effluent from industrial or other sources on fish and benthic populations. Effect endpoints, which are used as indicators of potentially important effluent effects, are measured at effluent-exposed sites and are compared statistically to measures at reference sites, in order to determine if changes have occurred and the magnitude of the changes. The main driver of the EEM-SAT DSS is its rule-based expert system. The results are used in assessing the adequacy of existing regulations for protecting aquatic environments.     

Experiences in developing and applying a software engineering technology testbed

A major problem in empirical software engineering is to determine or ensure comparability across multiple sources of empirical data. This paper summarizes experiences in developing and applying a software engineering technology testbed. The testbed was designed to ensure comparability of empirical data used to evaluate alternative software engineering technologies, and to accelerate the technology maturation and transition into project use. The requirements for such software engineering technology testbeds include not only the specifications and code, but also the package of instrumentation, scenario drivers, seeded defects, experimentation guidelines, and comparative effort and defect data needed to facilitate technology evaluation experiments. The requirements and architecture to build a particular software engineering technology testbed to help NASA evaluate its investments in software dependability research and technology have been developed and applied to evaluate a wide range of technologies. The technologies evaluated came from the fields of architecture, testing, state-model checking, and operational envelopes. This paper will present for the first time the requirements and architecture of the software engineering technology testbed. The results of the technology evaluations will be analyzed from a point of view of how researchers benefitted from using the SETT. The researchers just reported how their technology performed in their original findings. The testbed evaluation showed (1) that certain technologies were complementary and cost-effective to apply; (2) that the testbed was cost-effective to use by researchers within a well-specified domain of applicability; (3) that collaboration in testbed use by researchers and the practitioners resulted comparable empirical data and in actions to accelerate technology maturity and transition into project use, as shown in the AcmeStudio evaluation; and (4) that the software engineering technology testbed’s requirements and architecture were suitable for evaluating technologies and accelerating their maturation and transition into project use.

Fiber-optic epoxy composite cure sensor. I. Dependence of refractive index of an autocatalytic reaction epoxy system at 850 nm on temperature and extent of cure

We discuss the behavior of the refractive index of a typical epoxy-aromatic diamine system. Near 850 nm the index of refraction is found to be largely controlled by the density of the epoxy. Models are derived to describe its dependence on temperature and extent of cure. Within the range of temperatures studied, the refractive index decreases linearly with increasing temperature. In addition, as the epoxy is cured, the refractive index increases linearly with conversion to the gel point. From then on, shrinkage in the volume of the epoxy is restricted by local viscosity. Therefore the linear relationship between the refractive index and the extent of cure does not hold beyond the gel point.     

Fiber-optic epoxy composite cure sensor. II. Performance characteristics

The performance of a fiber-optic epoxy composite cure sensor, as previously proposed, depends on the optical properties and the reaction kinetics of the epoxy. The reaction kinetics of a typical epoxy system are presented. It is a third-order autocatalytic reaction with a peak observed in each isothermal reaction-rate curve. A model is derived to describe the performance characteristics of the epoxy cure sensor. If a composite coupon is cured at an isothermal temperature, the sensor signal can be used to predict the time when the gel point occurs and to monitor the cure process. The sensor is also shown to perform well in nonstoichiometric epoxy matrices. In addition the sensor can detect the end of the cure without calibration.     

Application of virtual reality for peritoneal dialysis exchange learning in patients with end-stage renal disease and cognitive impairment

Virtual Reality - Cognitive impairment is not uncommon in patients with end-stage renal disease and can make it more difficult for these patients to carry out peritoneal dialysis (PD) on their own....     

Ferritin Protein Regulates the Degradation of Iron Oxide Nanoparticles

Proteins implicated in iron homeostasis are assumed to be also involved in the cellular processing of iron oxide nanoparticles. In this work, the role of an endogenous iron storage protein—namely the ferritin—is examined in the remediation and biodegradation of magnetic iron oxide nanoparticles. Previous in vivo studies suggest the intracellular transfer of the iron ions released during the degradation of nanoparticles to endogenous protein cages within lysosomal compartments. Here, the capacity of ferritin cages to accommodate and store the degradation products of nanoparticles is investigated in vitro in the physiological acidic environment of the lysosomes. Moreover, it is questioned whether ferritin proteins can play an active role in the degradation of the nanoparticles. The magnetic, colloidal, and structural follow‐up of iron oxide nanoparticles and proteins in lysosome‐like medium confirms the efficient remediation of potentially harmful iron ions generated by nanoparticles within ferritins. The presence of ferritins, however, delays the degradation of particles due to a complex colloidal behavior of the mixture in acidic medium. This study exemplifies the important implications of intracellular proteins in processes of degradation and metabolization of iron oxide nanoparticles.