Syngas chemical looping process: Dynamic modeling of a moving‐bed reducer

The syngas chemical looping process coproduces hydrogen and electricity with iron oxide based oxygen carriers in a circulating moving bed system. In this article, a one‐dimensional (1‐D) dynamic model is developed to simulate the countercurrent gas–solid reactive flow in the moving‐bed reducer. This model is validated by TGA and bench‐scale experiments. Both the steady state and dynamic composition profiles are obtained to help understand the reaction and reactor behaviors. Numerical simulation on the effects of reactor length is conducted to optimize the moving‐bed reducer design. It is also found that minor variations in the feed rate ratio near a critical point that is represented by the reaction equilibrium could yield a significant difference in the time required for the reactions to reach a steady‐state operation. Such a difference has an important practical implication in that the moving‐bed reducer should be designed and operated to circumvent the critical point. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3432–3443, 2013     

Effect of silanes on the morphology,hydrophobicity, and dynamical mechanical properties of polyimide/silica hybrid membranes

Polyimide (PI)/silica hybrid membranes with high contact angles were prepared through the in situ sol–gel process. The precursor, poly(amic acid) with controlled block chain length, was synthesized using 4,4′‐diaminodiphenyl ether (ODA), 3,3′,4,4′‐benzophenone‐tetracarboxylic dianhydride (BTDA) and 3‐aminopropyl‐trimethoxysilane (APrTMOS) or 3‐aminopropyldimethylethoxysilane (APDiMOS). And then, phenyltrimethoxysilane (PTS) or tetramethoxysilane (TMOS) or methyltrimethoxysilane (MTrMOS) was respectively, added to the above polyamic acid and mixed thoroughly. Following curing reaction, the PI/silica hybrid membranes with different cross‐linkages, silica content, and hydrophobic properties were prepared. The effect on the formation of PI imide ring during imidization reaction is increased as the increase of silanes content and characterized by frequency shiftment and absorbance ratio of Fourier transform infrared (FTIR) measurements. All the hybrid membranes show high transparency though with high silica contents. The storage modulus, tan δ, and damping intensity by DMA measurements are all correlated with silane content or block chain length. And all these membranes with silane content possess high contact angle as compared to pure PI without any silanes added and the contact angles increase with increasing the silane content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of a new type poly(vinyl alcohol)/peat/bamboo charcoal/KNO3 composite bead used as biofilter material

A new type poly(vinyl alcohol) (PVA)/peat/bamboo charcoal (BC)/KNO₃ composite bead was prepared, which has a diameter of 2.4–6.0 mm and a density of 1.133 g/cm³ and is a porous spherical particle. The biochemical kinetic behaviors of n‐butyl acetate in PVA/peat/BC/KNO₃ spherical composite bead biofilter (BC biofilter) and PVA/peat/granular activated carbon (GAC)/KNO₃ spherical composite bead biofilter (GAC biofilter) were investigated. The values of half‐saturation constant K_s for BC biofilter and GAC biofilter were 27.89 and 27.95 ppm, respectively. The values of maximum reaction rate V_m for BC biofilter and GAC biofilter were 13.49 and 13.65 ppm/s, respectively. Zero‐order kinetic with the diffusion limitation was regarded as the most adequate biochemical reaction model for the two biofilters. The microbial growth rate and biochemical reaction rate for two biofilters were inhibited at higher inlet concentration, and the degree of inhibitive effect was more pronounced in the inlet concentration range of 100–800 ppm. The biochemical kinetic behaviors of the two biofilters were similar. The maximum elimination capacity of BC biofilter and GAC biofilter were 111.65 and 122.67 g C/h m³ bed volume, respectively. The PVA/peat/BC/KNO₃ composite bead was suitable as a biofilter material. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Betel Nut Arecoline Induces Different Phases of Growth Arrest between Normal and Cancerous Prostate Cells through the Reactive Oxygen Species Pathway

Prostate cancer (PCa) is a reproductive system cancer in elderly men. We investigated the effects of betel nut arecoline on the growth of normal and cancerous prostate cells. Normal RWPE-1 prostate epithelial cells, androgen-independent PC-3 PCa cells, and androgen-dependent LNCaP PCa cells were used. Arecoline inhibited their growth in dose- and time-dependent manners. Arecoline caused RWPE-1 and PC-3 cell cycle arrest in the G2/M phase and LNCaP cell arrest in the G0/G1 phase. In RWPE-1 cells, arecoline increased the expression of cyclin-dependent kinase (CDK)-1, p21, and cyclins B1 and D3, decreased the expression of CDK2, and had no effects on CDK4 and cyclin D1 expression. In PC-3 cells, arecoline decreased CDK1, CDK2, CDK4, p21, p27, and cyclin D1 and D3 protein expression and increased cyclin B1 protein expression. In LNCaP cells, arecoline decreased CDK2, CDK4, and cyclin D1 expression; increased p21, p27, and cyclin D3 expression; had no effects on CDK1 and cyclin B1 expression. The antioxidant N-acetylcysteine blocked the arecoline-induced increase in reactive oxygen species production, decreased cell viability, altered the cell cycle, and changed the cell cycle regulatory protein levels. Thus, arecoline oxidant exerts differential effects on the cell cycle through modulations of regulatory proteins.     

(?)-Epicatechin-3-O-β-d-allopyranoside from Davallia formosana,Prevents Diabetes and Hyperlipidemia by Regulation of Glucose Transporter 4 and AMP-Activated Protein Kinase Phosphorylation in High-Fat-Fed Mice

The purpose of this experiment was to determine the antidiabetic and lipid-lowering effects of (−)-epicatechin-3-O-β-d-allopyranoside (BB) from the roots and stems of Davallia formosana in mice. Animal treatment was induced by high-fat diet (HFD) or low-fat diet (control diet, CD). After eight weeks of HFD or CD exposure, the HFD mice were treating with BB or rosiglitazone (Rosi) or fenofibrate (Feno) or water through gavage for another four weeks. However, at 12 weeks, the HFD-fed group had enhanced blood levels of glucose, triglyceride (TG), and insulin. BB treatment significantly decreased blood glucose, TG, and insulin levels. Moreover, visceral fat weights were enhanced in HFD-fed mice, accompanied by increased blood leptin concentrations and decreased adiponectin levels, which were reversed by treatment with BB. Muscular membrane protein levels of glucose transporter 4 (GLUT4) were reduced in HFD-fed mice and significantly enhanced upon administration of BB, Rosi, and Feno. Moreover, BB treatment markedly increased hepatic and skeletal muscular expression levels of phosphorylation of AMP-activated (adenosine monophosphate) protein kinase (phospho-AMPK). BB also decreased hepatic mRNA levels of phosphenolpyruvate carboxykinase (PEPCK), which are associated with a decrease in hepatic glucose production. BB-exerted hypotriglyceridemic activity may be partly associated with increased mRNA levels of peroxisome proliferator activated receptor α (PPARα), and with reduced hepatic glycerol-3-phosphate acyltransferase (GPAT) mRNA levels in the liver, which decreased triacylglycerol synthesis. Nevertheless, we demonstrated BB was a useful approach for the management of type 2 diabetes and dyslipidemia in this animal model.     

Th17 Cells as Potential Probiotic Therapeutic Targets in Inflammatory Bowel Diseases

Inflammatory bowel diseases (IBD) are characterized by wasting and chronic intestinal inflammation triggered by various cytokine-mediated pathways. In recent years, it was shown that T helper 17 (Th17) cells are involved in the pathogenesis of IBD, which makes them an attractive therapeutic target. Th17 cells preferentially produce interleukin (IL)-17A–F as signature cytokines. The role of the interplay between host genetics and intestinal microbiota in the pathogenesis of IBD was demonstrated. Probiotics are live microorganisms that when orally ingested in adequate amounts, confer a health benefit to the host by modulating the enteric flora or by stimulating the local immune system. Several studies indicated the effectiveness of probiotics in preventing and treating IBD (ulcerative colitis, and Crohn’s disease). Furthermore, there is mounting evidence of probiotics selectively targeting the Th17 lineage in the prevention and management of inflammatory and autoimmune diseases such as IBD. This review highlights critical roles of Th17 cells in the pathogenesis of IBD and the rationale for using probiotics as a novel therapeutic approach for IBD through manipulation of Th17 cells. The potential molecular mechanisms by which probiotics modulate Th17 cells differentiation and production are also discussed.     

毛孔、釉疤的产生原因及克服方法

毛孔釉疤是陶瓷生产中常见的主要缺陷之一．对产品质量影响很大。本文针对其产生原因做了深入分析．提出“釉坯的还税分离是产生毛孔釉疤的根本原因”这一新观点,对其形成过程做了细致的描述,认为毛孔、釉疤、水泡边、薄坯泡是同一类缺陷．并提供了克服方法和应用实例。     

Scaling Analysis for the Axial Displacement and Pressure of Flextensional Transducers

We have examined the axial displacement, Δ h , and maximum axial pressure, P _max, of flextensional transducers such as the moonies and the rainbows with both scaling and mechanical analyses. For a constant electric field E across the transducer, Δ h / t ∝ E / t ² where t is the thickness of the rainbow or the thickness of the metal end cap of the moonie and Δ h / t , the relative axial displacement. Thus, for a constant voltage V across the transducer, Δ h / t ∝ V / t ³. As for the maximum pressure, P _max t ² for the rainbows and P _max∝ wt for the moonies where t is the thickness of the rainbow or the thickness of the metal end cap of the moonie and w the thickness of the piezoelectric disk of the moonie. These predictions agree well with the experimental results found in the rainbows and the moonies. Our analysis showed that although the rainbows and the moonies differ in design and processing, the underlying physics for the enhancement in the axial displacement are essentially the same: The nonuniform distribution of d ₃₁ through the thickness of the transducer causes the transducer to arch or flatten with an applied electrical field, which leads to the enhancement in the axial displacement. The only difference is that, for the transducer to arch, the applied field is in the opposite direction to the polarization in the rainbows but in the same direction as the polarization in the moonies.     

Anti-influenza Drug Discovery: Identification of an Orally Bioavailable Quinoline Derivative through Activity- and Property-Guided Lead Optimization

From a high-throughput screening (HTS) hit with inhibitory activity against virus-induced cytophathic in the low micromolar range, we have developed a potent anti-influenza lead through careful optimization without compromising the drug-like properties of the compound. An orally bioavailable compound was identified as a lead agent with nanomolar activity against influenza, representing a 140-fold improvement over the initial hit.     

The Properties of Sintered Calcium Phosphate with [Ca]/[P] = 1.50

In order to obtain the properties of the sintered as-dried calcium phosphate with [Ca]/[P] = 1.50, the characteristics of sintered pellets have been investigated using X-ray diffraction (XRD), inductively coupled plasma-mass spectrometry (ICP-MS), Fourier-transform infrared (FT-IR) spectra, Vickers hardness indentation and scanning electron microscopy (SEM). When the pellet samples were sintered between 700 °C and 1200 °C for 4 h, the hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂, HA) still maintained the major phase, accompanied with the rhenanite (NaCaPO₄) as the secondary phase and β-tricalcium phosphate (β-Ca₃(PO₄)₂, β-TCP) as the minor phases. In addition, the HA partially transformed to α-tricalcium phosphate (α-Ca₃(PO₄)₂, α-TCP) and tetracalcium phosphate (Ca₄(PO4)₂O, TTCP), when the pellet samples were sintered at 1300 °C and 1400 °C, respectively, for 4 h. The maximum density and Vickers Hardness (HV) of sintered pellet samples were 2.85 g/cm³ (90.18% theoretical density (T.D.)) and 407, which appeared at 1200 °C and 900 °C, respectively.