湿法成形薄型陶瓷砖的干燥

分析了湿法成形薄型陶瓷砖干燥的特点．具体讨论了微波干燥和少空气干燥方式在湿法薄形陶瓷砖干燥上中应用及干燥过程中坯体传动方式的选择。     

110kV变电站35kV高压系统边运行边改造实践

对宣钢供电系统110kV变电站35kV高压系统边运行边施工改造经验进行了分析探讨。指出选用优良的设备、制定周密的安全措施，能够确保施工、运行安全。     

两相管流工艺计算软件的研制

利用流体力学理论 ,结合目前国内外最新的两相流理论和实验研究成果 ,在描述气液两相流水力计算、热力计算和流型判断的数学物理模型基础上 ,研制出适用于海洋、沙漠、丘陵地区原油与伴生气、凝析天然气与凝液输送工艺的一套新的计算模拟软件TFTCS。介绍TFTCS软件的结构、功能、适用范围。用该软件对锦州 2 0 - 2海底湿天然气管道进行模拟计算 ,并与管线生产数据进行对比 ,用国外同类软件PIPEPHASE进行验算。实例计算分析表明 ,该软件功能完善 ,操作方便 ,计算结果可靠 ,能满足油气混输管道的设计计算和生产管理的需要     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Performance of GaAs-AlGaAs V-grooved inner stripe quantum-well wirelasers with different current blocking configurations

GaAs-AlGaAs V-grooved inner stripe (VIS) quantum-well wire (QWW) lasers grown by metalorganic chemical vapor deposition with different current blocking configurations, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate (VI(PN)_nS) and p-blocking on n-substrate (VINS) have been fabricated and characterized. The VIPS QWW lasers show the most stable characteristics with effective current confinement: one of the lasers shows fundamental transverse mode, lasing up to 5 mW/facet, typical threshold current of 39.9 mA at 818.5 mm, an external differential quantum efficiency of 24%/facet, and characteristic temperature of 92 K. The current tuning rate was almost linear at 0.031 mm/mA, and the temperature tuning rate was measured to be 0.14 nm/°C. Comparison of the light output versus current characteristics of the lasers with different current blocking configurations is presented here     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

用于疏通油水井的脉冲放电技术

评价了各种不同的解堵技术，指出冲击波解堵是一种很有发展前途的技术。介绍了液中脉冲放电产生冲击波的基本原理，并由此研制出了一套井下脉冲放电油水井处理设备样机。通过现场试验，表明用冲击波疏通油井能较好地解除油井污染，提高采收率。     

Investigation on the Recrystallization Behaviour of Cold Deformed MP159 Alloy

The recrystallization behaviour of cold drawn MP159 alloy was investigated by optical and TEM examinations. It is found that the platelet ε phase in the MP alloy inhibits the recrystallization,and this effect makes the MP159 alloy with high recrystallization temperature of about 920℃.This inhibition mainly comes from the increasing of the interfacial energy, which results from the change of the coherent interfaces of (0001)hcp//(111)fcc into the incoherent interfaces when the recrystallizing grain fronts bypass the platelet ε martensite. The increasing of the interfacial energy also causes the dissolution of a few segments on the ε martensite platelets, which decreases the strength of the MP alloy     

对《公司法》修改的几点质疑

文章针对<公司法>修改以后,删除了几条禁止性规范,从理论和实践两个角度,分析和揭示了由此可能产生的不利后果,并在此基础上提出了自己的修改意见.