Study on Contamination Control for Yield Enhancement in the Manufacturing Line of Cellular Phone Modules

Practical studies on the method of contamination control for yield enhancement in the cellular phone modules production line were carried out. A contamination control method was proposed, consisting of data collection, data analysis, improvement action, verification, and implementation of control. The partition check method and the composition analysis for data collection and data analysis were respectively used in the cellular phone modules manufacturing process, and these methods were evaluated by the variation of yield loss before and after implementing the actions for improvement. In the partition check method, the critical process step was selected, and yield loss reduction through improvement actions was observed, whereas in the composition analysis, critical sources were selected, and yield loss reduction through improvement actions was investigated. From the results, it is concluded that the partition check and the composition analysis are effective solutions for contamination control in cleanroom production lines.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.     

Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water

In the steam generators of nuclear power plants, the flow of cooling water can cause the tubes to vibrate, resulting in fretting wear damage due to contacts between these tubes and their supports. The tubes are made of Inconel 690 and Inconel 600 and the supports are made of STS 304. In this paper, fretting wear tests in water were performed using the materials Inconel 690 and Inconel 600 in contact with STS 304. Fretting tests using a cross-cylinder type set up were conducted under various vibrating amplitudes and applied normal loads in order to measure friction forces and wear volumes. Also, conventional sliding tests using a pin-on-disk type set up were carried out to compare these test results.In the fretting tests, friction force was found to be strongly dependent on normal load and vibrating amplitude. Coefficients of friction decreased with an increase in the normal load and a decrease in the vibrating amplitude applied. Also, the wear of Inconel 600 and Inconel 690 was predicted using a work rate model. Depending on the normal load and vibrating amplitude applied, distinctively different wear mechanisms and often drastically different wear rates occurred. It was found that the fretting wear coefficients for Inconel 600 and Inconel 690 were 9.3×10⁻¹⁵ and 16.2×10⁻¹⁵ Pa⁻¹, respectively. This study shows that Inconel 690 can result in lesser friction forces and exhibits less wear resistance than Inconel 600 in room temperature water.     

Dyspnea resulting from phrenic nerve paralysis after interscalene brachial plexus block in an obese male--a case report

While current psychiatric taxonomies recognise a classification of amphetamine dependence, derived from the notion of an alcohol dependence syndrome, little research has validated that such a condition exists for this drug. Current amphetamine users (N = 331), were interviewed using the World Health Organization operationalisation of DSM-III-R substance dependence criteria, and a measure of the psychological components of dependence. Structural analyses indicated that a unidimensional dependence syndrome as assessed by DSM-III-R and DSM-IV criteria exists for amphetamine, and that physiological, psychological and behavioural indicators were all important in accounting for the variance in responses. It was demonstrated that the concept of a dependence syndrome is applicable to amphetamine, and that the inclusion of the amphetamine dependence syndrome in DSM-III-R and DSM-IV is valid.     

Improved strained HEMT characteristics using double-heterojunctionIn0.65Ga0.35As/In0.52Al0.48As design

The DC and microwave properties of strained In_0.65Ga _0.35As/In₀₅₂Al_0.48As HEMTs (high electron-mobility transistors) with double-heterojunction design are presented. The high sheet carrier density and good carrier confinement give rise to excellent device performance with very low output conductance. For 1×150-μm² long-gate HEMTs, the measured cutoff frequency f_T and maximum frequency of oscillation f_max are as high as 37 and 66 GHz, respectively     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Semilinear Duhem model for rate-independent and rate-dependent hysteresis

The classical Duhem model provides a finite-dimensional differential model of hysteresis. In this paper, we consider rate-independent and rate-dependent semilinear Duhem models with provable properties. The vector field is given by the product of a function of the input rate and linear dynamics. If the input rate function is positively homogeneous, then the resulting input-output map of the model is rate independent, yielding persistent nontrivial input-output closed curve (that is, hysteresis) at arbitrarily low input frequency. If the input rate function is not positively homogeneous, the input-output map is rate dependent and can be approximated by a rate-independent model for low frequency inputs. Sufficient conditions for convergence to a limiting input-output map are developed for rate-independent and rate-dependent models. Finally, the reversal behavior and orientation of the rate-independent model are discussed.     

N-Methyl-D-aspartate attenuates opioid receptor-mediated G protein activation and this process involves protein kinase C

The effects of N-methyl-D-aspartate (NMDA) on opioid receptor-mediated G protein activation were explored in neuroblastoma X glioma hybrid (NG108-15) cells. Treatment of the cells with NMDA resulted in a remarkable attenuation of [35S]guanosine-5'-O-(3-thio)triphosphate binding stimulated by [D-Pen2,D-Pen5]-enkephalin (DPDPE), a delta-opioid receptor agonist. The effects of NMDA were dose and time dependent with an IC50 value of 5 nM and could be blocked by NMDA receptor antagonists. After NMDA treatment, the DPDPE dose-response curve shifted to the right (EC50 value increased approximately 7-fold, from 6 to 40 nM), and the maximal response induced by DPDPE was reduced by approximately 60%. The effects of NMDA were reversible, and the DPDPE response could recover within 60 min. The functional responses of delta-, mu-, and kappa-opioid receptors in primarily cultured neurons also were attenuated significantly by NMDA treatment. The inhibitory effects of NMDA on opioid receptor-mediated G protein activation could be blocked by coadministration of the protein kinase C (PKC) inhibitors or by elimination of the extracellular Ca2+. Correspondingly, NMDA treatment of NG108 cells significantly elevated cellular PKC activity and stimulated Gialpha2 phosphorylation. Transient transfection into NG108-15 cells of the wild-type Gialpha2 and a mutated Gialpha2 (Ser144Ala) resulted in a 2-fold increase in DPDPE-stimulated G protein activation. The DPDPE responses were greatly inhibited by NMDA treatment in the wild-type Gialpha2-transfected cells but much less affected in the mutant Gialpha2-transfected cells. In summary, NMDA attenuates opioid receptor/G protein coupling, and this process requires activation of PKC.     

Uterine relaxation responses to calcitonin gene-related peptide and calcitonin gene-related peptide receptors decreased during labor in rats

OBJECTIVES: Our purpose was to investigate (1) whether uterine relaxation responses to calcitonin gene-related peptide are differentially regulated during pregnancy and labor, (2) the involvement of nitric oxide in smooth muscle relaxant action of calcitonin gene-related peptide in the rat uterus, (3) whether receptors for calcitonin gene-related peptide are expressed in rat uterus, and if so (4) whether the concentrations of these receptors are differently regulated during pregnancy and labor. STUDY DESIGN: Rats were killed on day 18 of gestation, at the time of spontaneous labor, or postpartum day 2. The uteri were removed for in vitro contractility measurements, nitric oxide production, and calcitonin gene-related peptide receptor binding assay. RESULTS: (1) Calcitonin gene-related peptide induced a dose-dependent relaxation in spontaneously contracting uterine strips from pregnant rats on day 18 of gestation; (2) the relaxation effects of calcitonin gene-related peptide on the uterus were decreased during spontaneous delivery at term and post partum compared with that during pregnancy; (3) calcitonin gene-related peptide-induced relaxation was inhibited by pretreatment of the uterine tissue with a calcitonin gene-related peptide receptor antagonist, calcitonin gene-related peptide(8-37); (4) nitric oxide synthesis inhibitor (N(G)-nitro-L-arginine methyl ester) and soluble guanylate cyclase inhibitor (LY83583) significantly decreased calcitonin gene-related peptide-induced relaxation of the rat uterus during pregnancy; (5) calcitonin gene-related peptide increased the uterine nitric oxide production in pregnant rats, and this increase was obliterated in the presence of calcitonin gene-related peptide(8-37); and (6) calcitonin gene-related peptide receptors are present in rat uterus, and the concentration of these receptors dramatically increases during pregnancy and decreases during labor at term. CONCLUSIONS: Calcitonin gene-related peptide inhibits uterine spontaneous contractions in rats during pregnancy but not during labor and post partum. The inhibitory effects of calcitonin gene-related peptide on uterine contractility appear to be modulated, at least in part, by the activation of nitric oxide generation in the rat uterus. Changes in calcitonin gene-related peptide receptors could contribute to the changes in calcitonin gene-related peptide-mediated uterine relaxation during pregnancy and labor.     

A design and analysis of objective function-based unsupervised neural networks for fuzzy clustering

Fuzzy clustering has played an important role in solving many problems. In this paper, we design an unsupervised neural network model based on a fuzzy objective function, called OFUNN. The learning rule for the OFUNN model is a result of the formal derivation by the gradient descent method of a fuzzy objective function. The performance of the cluster analysis algorithm is often evaluated by counting the number of crisp clustering errors. However, the number of clustering errors alone is not a reliable and consistent measure for the performance of clustering, especially in the case of input data with fuzzy boundaries. We introduce two measures to evaluate the performance of the fuzzy clustering algorithm. The clustering results on three data sets, Iris data and two artificial data sets, are analyzed using the proposed measures. They show that OFUNN is very competitive in terms of speed and accuracy compared to the fuzzy c-means algorithm.