NMDA receptors mediate peripheral chemoreceptor afferent input in the conscious rat

N-methyl-D-aspartate (NMDA) glutamate receptors mediate critical components of cardiorespiratory control in anesthetized animals. The role of NMDA receptors in the ventilatory responses to peripheral and central chemoreceptor stimulation was investigated in conscious, freely behaving rats. Minute ventilation (VE) responses to 10% O2, 5% CO2, and increasing intravenous doses of sodium cyanide were measured in intact rats before and after intravenous administration of the NMDA receptor antagonist MK-801 (3 mg/kg). After MK-801, eupcapnic tidal volume (VT) decreased while frequency increased, resulting in a modest reduction in VE. Inspiratory time (TI) decreased, whereas expiratory time remained unchanged. The VE responses to hypercapnia were qualitatively similar in control and MK-801 conditions, with slight reductions in respiratory drive (VT/TI) after MK-801. In contrast, responses to hypoxia were markedly attenuated after MK-801 and were primarily due to reduced frequency changes, whereas VT was unaffected. Sodium cyanide doses associated with significant VE increases were 5 and 50 microg/kg before and after MK-801, respectively. Thus 1-log shift to the right of individual dose-response curves occurred with MK-801. Selective carotid body denervation reduced VE during hypoxia by 70%, and residual hypoxic ventilatory responses were abolished after MK-801. These findings suggest that, in conscious rats, carotid and other peripheral chemoreceptor-mediated hypoxic ventilatory responses are critically dependent on NMDA receptor activation and that NMDA receptor mechanisms are only modestly involved during hypercapnia.     

Vortex structure in high-T c ceramic superconductors

We consider penetration of magnetic flux in the rare earth ceramic superconductors within the framework of a generalized Ginzburg-Landau theory, based on the coexistence of antiferromagnetism and superconductivity. We study vortex structure produced for a magnetic field close to . We make a new prediction that may serve to test the theory experimentally.     

Novel Organometallic Aromatic Azo Polyesters Based on Ferrocene

Some ferrocene containing aromatic azo polyesters were prepared by condensing 1,1-ferrocenedicarbonyl chloride with different azo groups containing aromatic diols, which were synthesized by diazotization coupling reaction from aromatic diamines. The polymeric products were separated as two portions on the basis of their solubility and subsequently characterized by their elemental analysis and FTIR spectral studies. Thermal properties of the products were measured by differential scanning calorimetry and thermogravimetry and the activation energies of pyrolysis were calculated using Horowitz and Metzger's method. The molecular weights of the soluble portions were determined by gel permeation chromatography (GPC) and these portions were also characterized by their inherent viscosities and UV-Vis spectroscopic studies.     

Interactive Evolutionary Multi-Objective Optimization Algorithm Using Cone Dominance

As the number of objectives increases, the performance of the Pareto dominance-based Evolutionary Multi-objective Optimization (EMO) algorithms such as NSGA-II, SPEA2 severely deteriorates due to the drastic increase in the Pareto-incomparable solutions. We propose a sorting method which classifies these incomparable solutions into several ordered classes by using the decision maker's (DM) preference information. This is accomplished by designing an interactive evolutionary algorithm and constructing convex cones. This method allows the DMs to drive the search process toward a preferred region of the Pareto optimal front. The performance of the proposed algorithm is assessed for two, three, and four-objective knapsack problems. The results demonstrate the algorithm's ability to converge to the most preferred point. The evaluation and comparison of the results indicate that the proposed approach gives better solutions than that of NSGA-II. In addition, the approach is more efficient compared to NSGA-II in terms of the number of generations required to reach the preferred point.     

Heat exchanger network synthesis with detailed exchanger designs: Part 1. A discretized differential algebraic equation model for shell and tube heat exchanger design

A new method for the detailed design of shell and tube heat exchangers is presented through the formulation of coupled differential heat equations, along with algebraic equations for design variables. Heat exchanger design components (tube passes, baffles, and shells) are used to discretize the differential equations and are solved simultaneously with the algebraic design equations. The coupled differential algebraic equation (DAE) system is suitable for numerical optimization as it replaces the nonsmooth log mean temperature difference (LMTD) term. Discrete decisions regarding the number of shells, fluid allocation, tube sizes, and number of baffles are determined by solving an LMTD-based method iteratively. The resulting heat exchanger topology is then used to discretize the detailed DAE model, which is solved as a nonlinear programming model to obtain the detailed exchanger design by minimizing an economic objective function through varying the tube length. The DAE model also provides the stream temperature profiles inside the exchanger simultaneously with the detailed design. It is observed that the DAE model results are almost equal to the LMTD-based design model for one-shell heat exchangers with constant stream properties but shows significant differences when streams properties are allowed to vary with temperature or the number of shells are increased. The accuracy of the solutions and the required computational costs show that the model is well suited for solving heat exchanger network synthesis problems combined with detailed exchanger designs, which is demonstrated in Part 2 of the paper.     

PAK-104P, a pyridine analogue, reverses paclitaxel and doxorubicin resistance in cell lines and nude mice bearing xenografts that overexpress the multidrug resistance protein

For ethical decision-making near the end of life, autonomy is the moral North Star. At the same time, for some treatments, the burdens so clearly outweigh benefits that physicians may make a judgment not to offer the treatment. This is often clearer in surgery. A person with colon cancer and metastases may not insist on resection of the metastases. For some reason, some treatments have escaped these logical constraints. Attempted resuscitation of a dying patient is a good example. The circumstances in which a physician may make choices on behalf of a competent, terminally-ill patient without consent, and even without notification, are hotly debated, but data suggest that physicians do so frequently. Patients who lack capacity present even more difficult challenges. Advance directives, when available, can be extremely helpful, but even with them difficult problems can remain. If advance directives have not been established, family and close friends are an obvious source of guidance. Their legal role varies in different jurisdictions; in practice, they are crucial in bedside decision-making. Guardianship and alternatives to it remain a poor last resort. Euthanasia is a very difficult problem. We believe it is semantically misleading to lump under the term "passive euthanasia" those circumstances where potentially life-sustaining treatment is withheld or withdrawn. The tension between patient autonomy and medical common sense remains unresolved within the "futility" controversy. The authors believe it serves no purpose to discuss carefully with dying patients propositions that are nonsense. At the same time, physicians must not confuse decisions about quality of life with judgements about treatment effectiveness. We believe that what many, although not all, dying patients want are physicians with intelligent compassion who can take care of them through the dying process.     

Microfluidic continuous magnetophoretic protein separation using nanoparticle aggregates

We demonstrate a microfluidic continuous-flow protein separation process in which silica-coated superparamagnetic nanoparticles interact preferentially with hemoglobin in a mixture with bovine serum albumin, and the resulting hemoglobin-nanoparticle aggregates are recovered online using magnetophoresis. We present detailed modeling and analysis of this process yielding quantitative estimates of the recovery of both proteins, validated by experiments. While several previous studies utilize an average particle size in modeling magnetophoretic particle trajectories or process design, in this study we emphasize the importance of accounting for particle size distributions in calculating particle recovery, and therefore in estimating separation efficiency. We combine experimentally measured size distributions of protein-nanoparticle aggregates with simulations of particle trajectories and provide a simple analytical method to calculate the efficiency of separation at various flow speeds, which fully accounts for heterogeneity in particle sizes. Our method can potentially be used for affinity based biomolecular separations at both analytical and preparative scales by exploiting well-established techniques to functionalize nanoparticle surfaces with selective ligands. Further, the modeling methodology presented here may be applied to provide better estimates of particle recovery in a broad range of magnetophoretic separation processes involving heterogeneity in particle sizes.     

Microscale materials testing using MEMS actuators

Small size scale and high resolutions in force and displacement measurements make MEMS actuators appropriate for micromechanical testing. In this paper, for the first time, we present methodologies for uniaxial tensile and cantilever bending testing of both micrometer- and submicrometer-scale freestanding specimens using MEMS actuators. We also introduce dry fabrication processes for the specimens. The methodologies allow freestanding single or multilayered thin-film specimens to be fabricated separately from the MEMS actuators. For the uniaxial tension test, tensile forces are applied by lateral comb drive actuators capable of generating a total load of 383 μN at 40 V with resolutions on the order of 3 nN. A similar actuator is used in the bending test, with load resolution of 58 nN and spring constant of 0.78 N/m. The tensile testing methodology is demonstrated with the testing of a 110-nm-thick freestanding aluminum specimen. The cantilever bending experiment is performed on a 100-nm-thick aluminum specimen. The experimental setups can be mounted in a SEM (and also in a TEM after modifications for tensile testing) for in situ observation of materials behavior under different environmental conditions. Remarkable strengthening is observed in all the specimens tested compared to their bulk counterparts in both tensile and bending experiments. Experimental results highlight the potential of MEMS actuators as a new tool for materials research     

Positive chronotropic actions of parathyroid hormone and parathyroid hormone-related peptide are associated with increases in the current, I(f), and the slope of the pacemaker potential

BACKGROUND: The classic calciotropic hormone parathyroid hormone (PTH) and its paracrine factor parathyroid hormone-related protein (PTHrP) both increase heart rate. METHODS AND RESULTS: We used standard electrophysiological techniques to study the effects of PTH and PTHrP on isolated rabbit sinus node, isolated canine Purkinje fibers, and disaggregated rabbit sinus node myocytes. Sinus node maximum diastolic potential, activation voltage, and amplitude were unchanged by PTH or PTHrP (P>.05). However, the slope of phase 4 and the automatic rate were increased at PTH and PTHrP > or = 10 nmol/L (P<.05). Comparable results were seen in canine Purkinje fibers. We then used the perforated-patch technique to study the I(f) pacemaker current in sinus node. PTH 12.5 nmol/L and PTHrP 12.5 to 18 nmol/L increased I(f) at -65 mV by 68+/-41% (n=5) and 69+/-50% (n=5), respectively. Actions of both agents were reversible. The increase in I(f) appeared to result from a change in maximal conductance and not a shift in the voltage dependence of activation. CONCLUSIONS: These observations provide, for the first time, direct electrophysiological support for the chronotropic actions of PTH and PTHrP. They suggest that classic hormones and paracrine factors can have multiple functions and that in the case of PTH and PTHrP, a newly recognized action is to alter automaticity directly.