Treefrog Toe Pad‐Inspired Micropatterning for High‐Power Triboelectric Nanogenerator

Inspired by treefrog's toe pads that show superior frictional properties, herein, an industrially compatible approach is reported to make an efficient dielectric tribosurface design using customizable nonclose‐packed microbead arrays, mimicking the friction pads of treefrogs, in order to significantly enhance electrification performance and reliability of triboelectric nanogenerator (TENG). The approach involves using an engineering polymer to prepare a highly ordered large‐area concave film, and subsequently the molding of a convex patterned triboreplica in which the concave film is exploited as a reusable master mold. A nature‐inspired TENG based on the patterned polydimethylsiloxane (PDMS) paired with flat aluminum (Al) can generate a relatively high power density of 8.1 W m^?2 even if a very small force of ≈6.5 N is applied. Moreover, the convex patterned PDMS‐based TENG possesses exceptional durability and reliability over 25 000 cycles of contact–separation. Considering the significant improvements in power generation of TENG; particularly at very small force, together with cost‐effectiveness and possibility of mass production, the present methodology may pave the way for large‐scale blue energy harvesting and commercialization of TENGs for many practical applications.     

Routing Protocol for Heterogeneous Hierarchical Wireless Multimedia Sensor Networks

Recently, wireless multimedia sensor networks (WMSNs) have emerged as one of the most important technologies, driven by the development of powerful multimedia device such as CMOS. WMSNs require several factors such as resource constraints, specific QoS, high bandwidth and so on. In this paper, we propose a hierarchical heterogeneous network model based routing protocol for WMSNs. In our proposal, proposed network model is classified into monitoring class, delivery class and aggregation class. Also we define two kinds of the routing path in order to ensure bandwidth and QoS. In simulation results, we illustrate the performance of our proposal.     

An efficient implementation of surface impedance boundaryconditions for the finite-difference time-domain method

An efficient way to implement the surface impedance boundary conditions (SIBC) for the finite-difference time-domain (FDTD) method is presented in this paper. Surface impedance boundary conditions are first formulated for a lossy dielectric half-space in the frequency domain. The impedance function of a lossy medium is approximated with a series of first-order rational functions. Then, the resulting time-domain convolution integrals are computed using recursive formulas which are obtained by assuming that the fields are piecewise linear in time. Thus, the recursive formulas derived here are second-order accurate. Unlike a previously published method [7] which requires preprocessing to compute the exponential approximation prior to the FDTD simulation, the preprocessing time is eliminated by performing a rational approximation on the normalized frequency-domain impedance. This approximation is independent of material properties, and the results are tabulated for reference. The implementation of the SIBC for a PEC-backed lossy dielectric shell is also introduced     

High efficiency red phosphorescent organic light-emitting diodes using a spirobenzofluorene type phosphine oxide as a host material

High efficiency red phosphorescent organic light-emitting diodes have been developed using a spirobenzofluorene type phosphine oxide (SPPO2) as a host material. The SPPO2 had a high glass transition temperature of 119 °C and a smooth surface morphology with a surface roughness less than 1 nm. The red device with the SPPO2 as a host showed a quantum efficiency of 14.3% with a current efficiency of 20.4 cd/A.     

Enhancement of the photoelectric performance of dye-sensitized solar cells by using a CaCO3-coated TiO2 nanoparticle film as an electrode

Core-shell-type nanoparticles with TiO₂ cores and CaCO₃ shells were applied as the electrode of dye-sensitized solar cells. The performance of the cell was significantly improved (as high as 26.7%) compared to the case when un-coated TiO₂ particle film was used as electrode. The improved energy conversion efficiency has been ascribed to (i) enhanced dye adsorption due to the high isoelectric point of the overlayer, and (ii) the prevention of the back electron transfer by the insulating nature of the overlayer.     

Lipid production in Porphyridium cruentum grown under different culture conditions

Autotrophic growth of Porphyridium cruentum under 18:12 h and 12:12 h light:dark cycles showed the maximum cell concentration of 2.1 g-dry wt./L, whereas the specific growth rate, 0.042 (1/h), at 18:6 h is faster than that of 12:12 h, 0.031 (1/h), respectively. The highest lipid accumulation level, 19.3 (%, w/w), was achieved at 12:12 h cycle. Under dark cultivation condition with 10 g/L of glucose, the lipid accumulation in the cell was 10.9 (%, w/w), whereas the heterotrophic growth with glycerol as the carbon resource showed low level of cell concentration and lipid production, compared to that of glucose. The glucose was decided to be a suitable carbon resource for the heterotrophic growth of P. cruentum. The lipids from P. cruentum seemed be feasible for biodiesel production, because over 30% of the lipid was C₁₆–C_18:1. The cultivation time and temperature were important factors to increase the maximum cell concentration. Extending the cultivation time helps maintain the maximum cell concentration, and higher lipid accumulation was achieved at 25 °C, compared to 35 °C. The fed-batch cultures showed that, under the light condition, the specific production rate was slightly decreased to 0.4% lipid/g-dry wt./day at the later stage, whereas, under the dark condition, the specific production rate was maintained to be a maximum value of 1.1% lipid/g-dry wt./day, even in the later stage of cultivation. The results indicate that the heterotrophic or 12:12 h cyclic mixotrophic growth of P. cruentum could be used for the production of biodiesel in long-term fed-batch cultivation of P. cruentum.     

Complexation of methyl salicylate with β-cyclodextrin and its release characteristics for active food packaging

Food Science and Biotechnology - A series of methyl salicylate (MeSA)/β-cyclodextrin (β-CD) inclusion complexes (ICs) were prepared at different MeSA concentrations by the...     

Chemical Properties and Oxidative Stability of Perilla Oils Obtained From Roasted Perilla Seeds As Affected by Extraction Methods

Abstract: The chemical properties and oxidative stability of perilla oils obtained from roasted perilla seeds as affected by extraction methods (supercritical carbon dioxide [SC‐CO₂], mechanical press, and solvent extraction) were studied. The SC‐CO₂ extraction at 420 bar and 50 °C and hexane extraction showed significantly higher oil yield than mechanical press extraction (P < 0.05). The fatty acid compositions in the oils were virtually identical regardless of the extraction methods. The contents of tocopherol, sterol, policosanol, and phosphorus in the perilla oils greatly varied with the extraction methods. The SC‐CO₂‐extracted perilla oils contained significantly higher contents of tocopherols, sterols, and policosanols than the mechanical press‐extracted and hexane‐extracted oils (P < 0.05). The SC‐CO₂‐extracted oil showed the greatly lower oxidative stability than press‐extracted and hexane‐extracted oils during the storage in the oven under dark at 60 °C. However, the photooxidative stabilities of the oils were not considerably different with extraction methods.     

Digestibility and physicochemical properties of granular sweet potato starch as affected by annealing

The effects of annealing on the digestibility, morphology, and physicochemical characteristics of four types of granular sweet potato starches [Yulmi (YM), Yeonwhangmi (YHM), sweet potato starch from Samyang Genex (SSPS), and commercial sweet potato starch (CSPS)] were investigated. Annealing was performed at 55°C and 90% moisture content for 72 h. Morphology, the branched chain distribution of amylopectin, and the X-ray diffraction pattern remained unchanged during the annealing process. The slowly digestible starch content in annealed YM, YHM, and SSPS starches increased, but did not change in annealed CSPS. The gelatinization temperatures increased, but the gelatinization temperature range decreased with annealing. The swelling factor and amylose leaching decreased, while the close packing concentration increased. Rapid Visco Analyser analysis revealed that annealed starches possessed thermal stability and higher pasting temperatures. It is suggested that the enhanced packing arrangement formed during annealing impacts the digestibility and physicochemical properties of sweet potato starches.