Indirect Determination of Hydroxyl Radicals in Fine Particle Mist Generated from an Odor Control Technology via HPLC

Size distribution analysis of microsized water particle mist generated from an odor control technology showed the majority of particles to be in the low micron range. The indirect detection and determination of hydroxyl radicals generated by their reaction with benzene to produce phenol was performed through UV-Vis spectrophotometry (UV-Vis) and high performance liquid chromatography (HPLC). These techniques gave verification of the presence of hydroxyl radical species in the water samples collected via this odor control technology. This technology is currently being utilized at various wastewater treatment plants.     

Effect of microstructure of acrylic copolymer/terpolymer on the properties of silica based nanocomposites prepared by sol-gel technique

Acrylic copolymers/terpolymers with different comonomer contents were prepared by solution polymerization. Copolymers/terpolymers-silica hybrid composites were synthesized by acid catalyzed sol-gel technique using tetraethoxysilane (TEOS) as silica precursor. Microstructure of the copolymers and the terpolymers was analyzed by C¹³ nuclear magnetic resonance and Fourier transform infrared (FTIR) spectroscopy. The hybrid composites were characterized by scanning electron microscopy (SEM), FTIR, thermogravimetry, dynamic mechanical thermal analysis (DMTA) and their mechanical properties. The results showed that an increase in hydrophilicity of the polymer matrix and the ratio of ethyl to butyl acrylate, and incorporation of acrylic acid as termonomer helped in finer dispersion of silica and prevented macrophase separation. There was no evidence of chemical interaction between the polymer and the dispersed silica phase. Dynamic mechanical thermal analysis indicated mechanical reinforcement within the hybrid composites. As a result, these composites demonstrated superior tensile strength and tensile modulus with increasing proportion of TEOS up to a certain level. At a particular TEOS concentration, the tensile properties improved with increasing hydrophilicity of the polymer matrix and acrylic acid modification. The mechanism for improvement in mechanical and dynamic mechanical properties of the hybrids was discussed.     

Inferential estimation of molecular weights of polybutadiene rubber by neural networks

Molecular weight distribution, which is characterized by its averages like number average (Mn) and weight average (Mw), is one of the important properties of polybutadiene rubber (PBR), and it is difficult to measure. The objective of this work is to develop models to predict Mn and Mw from readily available process variables. Neural networks that are capable of mapping highly complex and non‐linear dependencies have been adapted to develop models for the Mn and Mw of PBR. The molecular weight distribution and its averages of PBR samples collected over a wide range of operating conditions were measured by the conventional Gel Permeable Chromatograph (GPC) method. Neural networks were trained with relevant data to predict Mn and Mw from process variables. The trained networks were found to generalize well when tested with new data. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1611–1618, 2005     

Coloration of polypropylene with interference pigment and the effect of wetting agents on its optical properties

Coloration of polypropylene with interference pigment with and without dispersing agents, namely propylene glycol and poly (ethylene glycol) were studied. Effect of pigment concentrations and dispersing agents on various color properties of the molded specimens, such as reflectance versus wavelength characteristics, angular dependency, K/S data, and flop index were evaluated using the CIE system with goniospectrophotometer. Surface image analysis was also conducted. Based on the above parameters, design equations were developed. The study revealed that the effective concentration of the interference pigment was 0.5% and better color characteristics were found when poly (ethylene glycol) was used as a dispersing agent. Presented at the Symposium on Color and Appearance Instrumentation (SCAI), cosponsored by the inter-Society Color Council (ISCC) and the Federation of Societies for Coatings Technology (FSCT), April 15–16, 2003 in Chicago, IL.     

Differential Physio-Biochemical and Metabolic Responses of Peanut (Arachis hypogaea L.) under Multiple Abiotic Stress Conditions

The frequency and severity of extreme climatic conditions such as drought, salinity, cold, and heat are increasing due to climate change. Moreover, in the field, plants are affected by multiple abiotic stresses simultaneously or sequentially. Thus, it is imperative to compare the effects of stress combinations on crop plants relative to individual stresses. This study investigated the differential regulation of physio-biochemical and metabolomics parameters in peanut (Arachis hypogaea L.) under individual (salt, drought, cold, and heat) and combined stress treatments using multivariate correlation analysis. The results showed that combined heat, salt, and drought stress compounds the stress effect of individual stresses. Combined stresses that included heat had the highest electrolyte leakage and lowest relative water content. Lipid peroxidation and chlorophyll contents did not significantly change under combined stresses. Biochemical parameters, such as free amino acids, polyphenol, starch, and sugars, significantly changed under combined stresses compared to individual stresses. Free amino acids increased under combined stresses that included heat; starch, sugars, and polyphenols increased under combined stresses that included drought; proline concentration increased under combined stresses that included salt. Metabolomics data that were obtained under different individual and combined stresses can be used to identify molecular phenotypes that are involved in the acclimation response of plants under changing abiotic stress conditions. Peanut metabolomics identified 160 metabolites, including amino acids, sugars, sugar alcohols, organic acids, fatty acids, sugar acids, and other organic compounds. Pathway enrichment analysis revealed that abiotic stresses significantly affected amino acid, amino sugar, and sugar metabolism. The stress treatments affected the metabolites that were associated with the tricarboxylic acid (TCA) and urea cycles and associated amino acid biosynthesis pathway intermediates. Principal component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), and heatmap analysis identified potential marker metabolites (pinitol, malic acid, and xylopyranose) that were associated with abiotic stress combinations, which could be used in breeding efforts to develop peanut cultivars that are resilient to climate change. The study will also facilitate researchers to explore different stress indicators to identify resistant cultivars for future crop improvement programs.     

Improving Performance of the Synthesis of Silica Nanoparticles by Surfactant-incorporated Wet Attrition Milling

Silicon - Abundant applications of silica nanoparticles (SiNPs) have motivated many research groups for silica nanoparticles synthesis with tuned properties. Here we show the formation of SiNPs...     

Investigation of CL‐20 and RDX Nanocomposites

Nanocrystalline explosives offer a number of advantages in comparison to conventional energetics including reduced sensitivity and improved mechanical properties. In this study, formulations consisting of 90 % hexanitro‐hexaazaisowurtzitane (CL‐20) or cyclotrimethylene trinitramine (RDX) and 10 % polyvinyl alcohol (PVOH) were prepared with mean crystal sizes ranging from 200 nm to 2 μm. The process to create these materials used a combination of aqueous mechanical crystal size reduction and spray drying. The basic physical characteristics of these formulations were determined using a variety of techniques, including scanning electron microscopy, X‐ray diffraction, and Raman spectroscopy. Compressive stress‐strain tests on pressed pellets revealed that the mechanical properties of the compositions improved with decreasing crystal size, consistent with Hall‐Petch mechanics. In the most extreme case (involving CL‐20/PVOH formulations), crystal size reduction from 2 μm to 300 nm improved compressive strength and Young’s modulus by 126 % and 61 %, respectively. These results serve to highlight the relevance of structure‐property relationships in explosive compositions, and particularly elucidate the substantial benefits of reducing the high explosive crystal size to nanoscale dimensions.     

Morphological and Elemental Investigations on Co–Fe–B–O Thin Films Deposited by Pulsed Laser Deposition for Alkaline Water Oxidation: Charge Exchange Efficiency as the Prevailing Factor in Comparison with the Adsorption Process

Catalysis Letters - Mixed transition-metals oxide electrocatalysts have shown huge potential for electrochemical water oxidation due to their earth abundance, low cost and excellent...     

Bioprocess Scale-up for Acetohydroxamic Acid Production by Hyperactive Acyltransferase of Immobilized Rhodococcus Pyridinivorans

Catalysis Letters - In this study, Rhodococcus pyridinivorans cells containing hyperactive acyltransferase was immobilized on various macromolecules based-polymeric matrices and used to improve...     

Workstation-based logic animation and microarchitecture emulationfor teaching introduction to computer engineering

The authors describe two software tools used for teaching logic design and analysis and basic computer organization in the introductory course on computer engineering at the authors' department. The first computer-aided instruction tool described is a schematic capture, simulation, and logic animation package targeted for teaching combinational and sequential logic concepts. The tool incorporates logic animation capability rather than waveform displays, which allows students to view and control logic values propagating throughout the entire network. The second tool teaches computer organization, including microprogramming concepts, by means of the graphical display of an instructional microprocessor architecture in which users are allowed to view and control internal registers, memory locations, and microcontrol store. Both of the computer-aided instructional tools run on UNIX workstations, with graphics displays, local hard-disk mass storage, and mouse input