Nondestructive evaluation of the characteristics of degraded materials using backward radiated ultrasound

The frequency dependency of Rayleigh surface wave is investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in two kinds of degraded specimens by scuffing or corrosion. Then, the frequency dependency is compared with the residual stress distribution or the corrosion-fatigue characteristics for the scuffed or corroded specimens, respectively. The width of the backward radiation profile increases with the increase of the variation in residual stress distribution for the scuffed specimens. In the corroded specimens, the profile width decreases with the increase of the effective aging layer thickness and is inversely proportional to the exponent, m, in the Paris’ law that can predict the crack size increase due to fatigue. The result observed in this study demonstrates high potential of backward radiated ultrasound as a tool for nondestructive evaluation of subsurface gradient of material degradation generated by scuffing or corrosion.     

Solution of a multidimensional inverse radiation problem by means of mode reduction

The Karhunen–Loève Galerkin procedure is employed to solve an inverse radiation problem of determining the time‐varying strength of a heat source, which mimics flames in a furnace, from temperature measurements in three‐dimensional participating media where radiation and conduction occur simultaneously. The inverse radiation problem is solved through the minimization of a performance function, which is expressed by the sum of square residuals between calculated and observed temperature, using a conjugate gradient method. Through the Karhunen–Loève Galerkin procedure, one can represent the system dynamics with a minimum degree of freedom, and consequently the amount of computation required in the solution of the inverse problem is reduced drastically when the present technique is adopted. Copyright © 2004 John Wiley & Sons, Ltd.     

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

The Region 1 & 3 Broadcasting‐Satellite Service Plan after WRC‐03

The 1977 Broadcasting‐Satellite Service (BSS) Plan for Region 1 & 3 had been widely acknowledged to be out‐of‐date by the late 1980s. Development of digital modulation in the early 1990s provided an opportunity to update the technical provisions of the Plan to make it more economically viable. After a decade of work and three World Radiocommunication Conferences (WRCs), the revision of Region 1 & 3 BSS Plan was finally completed in 2003. The new Plan increased channel assignments from 5 to 10 analog‐equivalent channels for each country in Region 1, and from 4 to 12 channels for each country in Region 3. Yet, despite the increase in capacity, the new Plan is surprisingly similar to the original one in terms of the technical parameters. It is still based on national coverage, and the channel plan, orbital location, orbital spacing, and polarization are also the same. As a result, the new Plan is no more economically viable to implement than the old. To create economically viable BSS systems would most likely require modifications to the assignment in the Plan. Yet, modification procedures were made more difficult to apply after replanning. Less future implementation of BSS networks than would otherwise have occurred can be expected, and an inefficient usage of these frequency bands will likely result. On the other hand, less implemented systems will mean more capacity set aside for future use. This is important for countries that currently do not have satellite operations. In the end, BSS replanning reflects the eternal conflict between efficient usage and guaranteed future access. Copyright © 2005 John Wiley & Sons, Ltd.     

3D optical interconnects for high-speed interchip and interboardcommunications

Metal-based communications between subsystems and chips has become the limiting factor in high-speed computing. Maturing optics-based technologies offer advantages that may unplug this bottleneck. Optical interconnects offer high-speed computers key advantages over metal interconnects. These include (1) high spatial and temporal bandwidths, (2) high-speed transmission, (3) low crosstalk independent of data rates, and (4) high interconnect densities. Although faster device switching speeds will eventually be necessary for future massively parallel computing systems, the deciding factor in determining system performance and cost will be subsystem communications rather than device speed. Free-space optical interconnects, by virtue of their inherent parallelism, high data bandwidth, small size and power requirement, and relative freedom from mutual interference of signals, already show great promise in replacing metal interconnects to solve communication problems     

Rat mature sympathetic neurones derive neurotrophin 3 from peripheral effector tissues

In a previous study we have demonstrated that endogenous neurotrophin 3 (NT3) is required for the survival of most sympathetic neurones in postnatal rats. However, the mechanisms underlying the action of NT3 on sympathetic neurones is not known. Neither is it understood whether NT3 is retrogradely transported from peripheral tissues or acts locally in an autocrine fashion. In the present study, NT3-mRNA was quantified in sympathetic effector tissues and NT3 protein was localized in intact and lesioned sympathetic nerves in rats. NT3-mRNA is expressed and developmentally regulated in many effector tissues including mesenteric arteries, salivary gland, heart and kidney but hardly detectable in the superior cervical ganglia of adult animals. The majority of sympathetic neurones express immunoreactivity for TrkA and TrkC in both neonatal and adult rats. Sympathetic somata are normally immunoreactive for NT3, but the immunoreactivity is abolished by systemic administration of NT3 antibodies or axotomy of postganglionic neurones, suggesting an accumulation of NT3 from extraneuronal sources. Furthermore, the detection of NT3-immunoreactivity in the internal carotid nerve as early as 3 h following a compression and only on the distal side indicates endogenous NT3 is retrogradely transported by sympathetic neurones. These studies provide evidence indicating that NT3, like nerve growth factor, is an effector tissue-derived neurotrophic factor for sympathetic neurones both during development and in the adult animal. Thus, we have provided a clear example that one type of neurone derives, through a retrograde transport mechanism, two neurotrophic factors simultaneously from its peripheral effector tissues.     

Matrix unit cell scheduler (MUCS) for input-buffered ATM switches

This paper presents a novel matrix unit cell scheduler (MUCS) for input-buffered asynchronous transfer mode (ATM) switches. The MUCS concept originates from a heuristic strategy that leads to an optimal solution for cell scheduling. Numerical analysis indicates that input-buffered ATM switches scheduled by MUCS can utilize nearly 100% of the available link bandwidth. A transistor-level MUCS circuit has been designed and verified using HSPICE. The circuit features a regular structure, minimal interconnects, and a low transistor count. HSPICE simulation indicates that using 2-μm CMOS technology, the MUCS circuit can operate at clock frequency of 100 MHz     

Identification of the DRB1*1313 allele in a sibling pair

Amines such as dopamine, norepinephrine and epinephrine were analysed in the brain regions of O.mossambicus exposed to quinalphos, phenthoate and their combination for 96 hr. The three types of treatments significantly (P < 0.05) altered the amines level at various intervals in the brain regions.     

Effects of chloroquine treatment on antioxidant enzymes in rat liver and kidney

The effect of chloroquine (CHQ) administration on antioxidant enzymes in rat liver and kidney was studied. Male Sprague-Dawley rats were administered 20 mg/kg CHQ once a week for 4 weeks (chronic treatment) or a single dose at 10 or 20 mg/kg (acute treatment). Antioxidant enzyme activities were determined in cytosolic fractions of liver and kidney, whereas reduced glutathione (GSH) and malondialdehyde (MDA) were determined in tissue samples. Results indicate minimal effects of acute CHQ treatment, whereas chronic treatment with CHQ differentially affected antioxidant enzymes in the two organs. Superoxide dismutase activity was increased nearly twofold, while activities of selenium glutathione peroxidase (GPX), catalase, and NAD (P) H: quinone oxidoreductase were decreased in livers of CHQ-treated rats compared to controls. No significant effects of CHQ on glutathione reductase, GSH, and MDA levels were seen in the liver. Fewer effects of CHQ were observed in the kidney where a decrease in GPX activity and an increase in MDA levels was seen. Lowering of antioxidant enzymes activities in the liver by CHQ could render the organ more susceptible to subsequent oxidative stress; while increased MDA production after CHQ treatment in the kidney indicate that the organ is being subjected to oxidative stress. This could have implications for prolonged chloroquine intake.