川东石炭系气藏排水采气工艺技术及其应用

四川盆地东部石炭系气藏是中国石油西南油气田公司的主力气藏之一，经过20多年的开发，出水气井增多、开发难度加大，必须进行排水采气才能维持正常生产。由于石炭系气藏大部分生产井存在井深、地层压力系数低、温度高、静液面深、复产后井口套压高的特点，常规排水采气工艺不能满足气藏的要求。针对这些难点，研究出深井高压气举、低压深井的优选管柱、深井高温泡排三项适合石炭系气藏的排水采气工艺，并在现场十多口井上进行了试验，增产效果显著。     

On the behavior of microstructures with multiple length scales

The current study aims to provide fundamental insight into the behavior of microstructures containing grain sizes that span multiple length scales. A commercial 5083 Al alloy was selected as the material of interest to facilitate comparison with recently published data. The materials studied here were prepared via the thermal consolidation of powders that were cryomilled for different times (i.e., 0, 2, 4, and 8 hours). Following consolidation, the resultant microstructure was characterized by an equiaxed grain morphology with a size distribution centered around 200∼300 nm. Dispersed among the 200- to 300-nm grains were coarse-grained regions or ligaments with a grain size ranging from 600 nm to 2 μm. The occurrence of coarse-grained regions is rationalized on the basis of recrystallization or subgrain coarsening, whereas the occurrence of equiaxed fine regions is proposed to be a result of continuous grain growth. Two types of microstructures were selected for study, containing coarse-grained volumes of approximately 28 pct and 43 pct that corresponded to an ultimate tensile strength (UTS) of 566 MPa and 535 MPa, and a fracture strain of 3.2 pct and 3.5 pct, respectively. The observed ductility and the relevant toughening mechanisms were discussed in light of the presence of multiple length scales.     

灌区管理信息系统的研制开发

在计算机技术日益向农业生产管理领域渗透的大背景下,针对灌区管理的普遍需求和项目区实际特点建立了功能简捷适用、结构科学合理的灌区管理信息系统。系统的主要功能有:基本信息服务、实时监测与自动控制、需水预测、用水调度、图形报表、办公自动化管理、数据库管理、系统维护。结合系统在项目区的应用,证明了系统的开发建设是成功的,具有应用推广价值,也可以为同类系统的建设提供参考。     

Mechanical properties of iron processed by severe plastic deformation

In the present study, the mechanical properties of Fe processed via severe plastic deformation (equal-channel angular pressing (ECAP)) at room temperature were investigated for the first time. The grain size of annealed Fe, with an initial grain size of about 200 μm, was reduced drastically during ECAP. After eight passes, the grain size reaches 200 to 400 nm, as documented by means of transmission electron microscopy (TEM). The value of microhardness during pressing increases 3 times over that of the starting material after the first pass and increases slightly during subsequent pressing for higher-purity Fe. Examination of the value of microhardness after eight passes as a function of post-ECAP annealing temperature shows a transition from recovery to recrystallization, an observation that resembles the behavior reported for heavily deformed metals and alloys. The tensile and compression behaviors were examined. In tension, a drop in the engineering stress-engineering strain curve beyond maximum load was observed both in the annealed Fe and the ECAP Fe. This drop is related to the neck deformation. The fracture surface, examined by scanning electron microscopy (SEM), shows vein patterns, which is different from the dimples found on the fracture surface of annealed Fe. In compression, an initial strain-hardening region followed by a no-strain-hardening region was observed in the ECAP Fe. The yield strength in tension of the ECAP Fe was observed to be higher than that in compression. The strengthening mechanisms and softening behavior are discussed.     

长庆油田苏平1井固井技术研究与应用

苏平l井完井方式运用了技术套管一次上返、悬挂尾管和筛管技术。该井技术套管段井眼大、裸眼段长，加上大斜度、小间隙的尾管段．对水泥浆体系的性能要求较高。总结分析了长庆天然气水平井苏平l井的固井技术问题，介绍了苏平l井的井身结构与地层性质。通过研究．确定采用低失水GSJ水泥浆体系。该体系成功地应用在三次工程建井过程中，解决了长裸眼、大灰量、大斜度、尾管小间隙等固井技术问题。固井质量达到工程要求。     

煤粉粒度对高炉风口前燃烧性能的影响

安钢炼铁厂在喷吹瘦煤后，将小于0．074mm的比例由70％放宽到30％，使磨煤能力提高了21％。采用自行设计的风口取样器，研究了风口前气体成分和煤粉燃烧率的变化。当煤粉粒度变粗后，风口前循环区变长，放宽煤粉粒度与高富氧、高风温配合，能使高炉得到较好的经济效益。     

基于B/S和C/S的高中校园一卡通系统

结合广东潮州高级中学的实际情况,介绍了高中校园一卡通系统的设计和应用.     

PRO——一种新的地震资料处理方法

PRO(影像的参数展开)技术是由俄罗斯地球物理学家开发的一种崭新的地震资料处理技术。本文从PRO基本原理入手,简单介绍了PRO的速度分析原理。PRO速度分析和成像均以信号的椭圆展开和参数展开为基础,其中参数展开方法考虑波型转换、介质的横向不均匀造成传播速度的变化。该技术抛开了传统共中心点叠加的思想,从根本上解决了以CMP方法为基础的传统地震处理技术遇到的困难。通过模型与实例分析对比,PRO比传统CMP方法更优越。     

陶瓷行业推行ISO14000探析

大力推行ISO14000系列标准已成为我国陶瓷企业适应加入WTO后新的竞争形式，参与国际绿色贸易的有力武器。本文根据我国陶瓷企业的现状，分析了在陶瓷行业推行ISO14000系列标准工作中所存在的问题，提出了在我国陶瓷行业广泛推行ISO14000系列标准的对策和建议。     

被动累积~(222)Rn-~(222)Rn探测器

本文采用 2只扩散杯 ,一只选择渗透率较大的滤膜 ,使2 2 2 Rn和2 2 0 Rn能很容易的进入。另一只选择渗透率较小的滤膜 ,该滤膜只允许2 2 2 Rn进入 ,半衰期较短的2 2 0 Rn被阻挡在外面。通过不同滤膜扩散率的差异 ,改变探测器的空气交换率 ,从而达到同时测量2 2 2 Rn和2 2 0 Rn的目的