Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.     

Calculations from texture of earing in deep drawing for FCC metal sheets

The present study aims to calculate the height at each peripheral position of a cup drawn from polycrystalline sheet using texture data. In the analytical treatment the polycrystalline sheet is simplified to an aggregation of many single crystals with various orientations, and the texture is represented by a three-dimensional crystallite orientation distribution function. The ear is calculated crystallographically using the orientation distribution function as a volume fraction of a certain oriented crystal. In the experiment aluminium, Al-Mg alloy and copper sheets which are treated under various conditions of cold rolling and heat treatment are used. The average textures over the thicknesses of the sheets are measured by the Schulz reflection method. The calculated ears based on the measured textures are compared with the experimental ears for each material. The results show that all the principal features of the ears of drawn cups are predicted satisfactorily by the calculation.     

Detection of Buckminsterfullerene in Usual Soots and Commercial Charcoals

Abstract

It was confirmed that soot produced by free burning of small hydrocarbons like benzene and cyclohexane generally contains less than 0.1 ppm of C₆₀. Small, but measurable amounts of C₆₀ were found in two samples of charcoal, providing the first indication of fullerene formation in the solid state.     

Magnetovolume effects in manganese nitrides with antiperovskite structure

Magnetostructural correlations in antiperovskite manganese nitrides were investigated systematically for stoichiometric and solid solution Mn₃Cu_1?xA_xN (A = Co, Ni, Zn, Ga, Ge, Rh, Pd, Ag, In, Sn or Sb). This class of nitrides is attracting great attention because of their giant negative thermal expansion, which is achieved by doping Ge or Sn into the A site as a relaxant of the sharp volume contraction on heating (spontaneous volume magnetostriction ω_s) because of the magnetovolume effects. The physical background of large ω_s and mechanism of how the volume contraction becomes gradual with temperature are central concerns for the physics and applications of these nitrides. An entire dataset of thermal expansion, crystal structure and magnetization demonstrates that the cubic triangular antiferromagnetic state is crucial for large ω_s. The intimate relationship between ω_s and the magnetic structure is discussed in terms of geometrical frustration related to the Mn₆N octahedron and magnetic stress concept. The results presented herein also show that ω_s depends on the number of d electrons in the A atom, suggesting the important role of the d orbitals of the A atom. Not all the dopants in the A site, but the elements that disturb the cubic triangular antiferromagnetic state, are effective in broadening the volume change. This fact suggests that instability neighboring the phase boundary is related to the broadening. The relation between the gradual volume change and the local structure anomaly is suggested by recent microprobe studies.     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

A New Laser Induced Incandescence–Mass Spectrometric Analyzer (LII-MS) for Online Measurement of Aerosol Composition Classified by Black Carbon Mixing State

We developed a laser induced incandescence–mass spectrometric analyzer (LII-MS) for online measurements quantifying the aerosol chemical compositions with respect to the mixing state of black carbon (BC). The LII-MS is developed as a tandem series comprising an LII chamber to detect and vaporize BC-containing particles and a particle trap laser desorption mass spectrometer (PT-LDMS: Takegawa et al. 2012). The PT-LDMS collects aerosol particles transferred from the LII chamber and quantifies the chemical compositions. A newly designed collection probe, coupled with the sheath-air inlet nozzle of the LII chamber, enables a high throughput of aerosol particles without significant dilution. Total aerosol particles can be analyzed in the PT-LDMS by turning off the laser (MS mode), and the aerosol particles externally mixed with BC can be analyzed by turning on the laser (LII-MS mode). The difference in the PT-LDMS signals between the MS and LII-MS modes yields the chemical composition of materials internally mixed with BC. Performance of the developed instrument was evaluated in the laboratory by generating BC particles internally-mixed with oleic acid (OL) and BC particles externally mixed with ammonium sulfate particles. Preliminary results from ambient measurements are also presented and discussed.

Copyright 2014 American Association for Aerosol Research     

Kinetics and reaction scheme of coal liquefaction over molten tin catalyst

Rates of formation of gases, oils, asphaltenes and preasphaltenes during non-solvent liquefaction of coal over molten tin catalyst have been measured. A probable reaction scheme and the rate constants for the pathways comprising the scheme have been presented. The results show that the catalyst greatly accelerates the conversion of preasphaltenes to asphaltenes. It also accelerates two other reactions, i.e., coal to preasphaltenes and coal to asphaltenes. By contrast, the catalyst does little to promote gasification and formation of oils.     

用于荧光灯管的全新第四代电子源（二）

在荧光灯（FL）管中,人们凭借经验发现了一种全新的电子源,它是高温氩晕空间（HTACS）。HTACS在带有微小BaO颗粒钨丝线圈的受热裸金属斑点上形成,在氩气体空间中,取自处于负电势阴极电极上HTACS的电子,向处于正电势阳极电极上的HTACS运动。在点亮FL管中,来自HTACS的流光电子在所运行ac电压处于正电势期间...     

Calcitonin gene-related peptide (CGRP)-containing nerve fibers in bone tissue and their involvement in bone remodeling

Bone remodeling is a process of bone renewal accomplished by osteoclastic bone resorption and osteoblastic bone formation. These two activities are regulated by systemic hormones and by local cytokines and growth factors. Moreover, the nervous system and certain neuropeptides seem to be involved in regulation of bone remodeling. In this paper, we focus on the distribution of CGRP-containing nerve fibers and their dynamics, and discuss the role of these fibers as a possible mechanism for nervous system involvement in regulation of bone remodeling. CGRP-immunoreactive nerve fibers are widely distributed in bone tissue, such as periosteum and bone marrow, and show apparent regional distribution with different densities. They are often associated with blood vessels and show a beaded appearance. The wide distribution of CGRP-immunoreactive nerve fibers in bone tissue and the changes in distribution during bone development and regeneration suggest the involvement of these fibers in bone remodeling. The effect of CGRP on bone remodeling could partly be through its action on blood vessels, thereby regulating local blood flow. Moreover, in vitro biochemical data and the localization of CGRP-immunoreactive nerve fibers in the vicinity of bone cells suggest that they are directly involved in local regulation of bone remodeling by elevating the concentration of CGRP in the microenvironment around bone cells, especially during bone growth or repair.