Improvement of piezoresistance properties of silicon carbide ceramics through co-doping of aluminum nitride and nitrogen

The piezoresistance coefficient was measured on co-doped silicon carbide ceramics. Evaluation samples of -silicon carbide ceramics were first fabricated by glass capsule HIP method using powder mixture of silicon carbide and aluminum nitride with various ratios. The resultant aluminum nitride added silicon carbide ceramics were doped with nitrogen by changing the post-HIP nitrogen gas pressure. The lattice parameter increased with the amount of adding aluminum nitride indicating that the incorporated aluminum substituted smaller silicon atoms. After post-HIP treatment, lattice parameter then decreased with nitrogen gas pressure. The piezoresistive coefficient increased with the addition of aluminum nitride, it further increased with the nitrogen doping pressure.     

Double-sensor method for detection of oscillating electric field

An electric-field sensor consisting of thin copper plates is designed to measure an oscillating electric field produced by charge separations on a plasma column. The sensor installed in a vacuum region around plasma detects charges induced by the electric field on the copper plates. The value of the induced charges depends not only on the strength of the electric field, but also on the design of the sensor. To obtain the correct strength of the electric field, a correction factor arising from the design of the sensor must be known. The factor is calculated numerically using Laplace's equation and compared with a value measured using a uniform electric field in the frequency range of 10-500 kHz. When an external circuit is connected to the sensor to measure the induced charges, the electric field around the sensor is disturbed. Therefore, a double-sensor method for excluding a disturbed component in the measured electric field is proposed. The reliability of the double-sensor method is confirmed by measuring dipole-like and quadrupole-like electric fields.     

Organic–inorganic hybrid materials. II. Preparation and properties of higher silica containing polycarbonate–silica hybrid materials

The sol–gel reaction of a polycarbonate (PC) oligomer having triethoxysilyl groups at both ends of the PC chain (PCS) with a tetraethoxysilane or tetramethoxysilane oligomer provided transparent or semitransparent films of higher silica containing organic–inorganic hybrid materials (HSPC‐HMs). The films were superior to those from PC and from PCS in terms of the morphological homogeneity, heat resistance, and surface hardness. The HSPC‐HM films had minimum oxygen permeability at a PCS/tetraethoxysilane ratio of 3/7. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4273–4279, 2006     

Miscibility in binary blends of aromatic and alicyclic polyamides

Miscibility was studied for four polyamide blends of 6I/6T [copolymer consisting of 1,6‐hexamethylene diamine and isophthalic acid (6I) (70 wt %) and terephthalic acid (6T) (30 wt %)] with MXD6 (polyamide of m‐xylenediamine and adipic acid), BAC6 (polyamide of 1,3‐bis(aminomethyl)cyclohexane and adipic acid), TR55 (copolymer consisting of nylon 11 (30 wt %), and polyamide of bis(3‐methyl, 4‐aminocyclohexyl)methane (30 wt %) and isophthalic acid (70 wt %), and CX7323 (polyamide of bis(4‐aminocyclohexyl)methane and dodecanedicarboxylic acid), using differential scanning calorimetry, X‐ray diffraction method, and electronmicroscopic observation. In quenched MXD6/(6I/6T) and BAC6/(6I/6T) blends, MXD6 and BAC6 components were miscible to 6I/6T, but TR55 and CX7323 components were completely phase‐separated from 6I/6T. Interestingly on electronmicroscopic observations, TR55 and CX7323 components were seen as droplets in 6I/6T medium when the content is low, but when 50 wt %, a layered structure was constructed with 6I/6T, reminiscent of morphological structure in block copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3971–3978, 2006     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Magnetic probe array with high sensitivity for fluctuating field

A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.     

An apparent ensemble effect in the oxidative coupling of methane on hydroxyapatites with incorporated lead

The introduction of small quantities of lead into calcium hydroxyapatite catalysts produces marked increases in the selectivity to C₂₊ hydrocarbons, while the conversion of methane remains relatively constant. Small surface concentrations of lead are sufficient to achieve C₂₊ selectivities of 80 and 90%, with oxygen and nitrous oxide, respectively, in contrast with 18 and 46%, respectively, obtained in the absence of lead. Since surface concentration of lead species sufficient to stabilize pairs of methyl radicals in close proximity to each other would be expected to facilitate the formation of C₂ hydrocarbons, an ensemble effect appears to be extant.     

Selective catalytic reduction of nitrogen oxides with hydrocarbons over Zn–Al–Ga complex oxides

Selective reduction of NO with hydrocarbons was studied using metal oxide catalysts having a spinel structure. A Zn–Al–Ga complex oxide was found to be very active and selective for the catalytic reduction of NO with both C₃H₆ and CH₄. It was revealed that the role of oxygen at the initial stage of the reaction strongly depends on the reductants; oxygen is mainly used for NO oxidation to NO₂ in the reduction with CH₄, whereas it is used both for NO oxidation to NO₂ and oxidation of C₃H₆ to an active intermediate in the reduction with C₃H₆. This revised version was published online in July 2006 with corrections to the Cover Date.     

A study on a porous residential building model in hot and humid regions: Part 1—the natural ventilation performance and the cooling load reduction effect of the building model

This study targets environmental load reduction in hot and humid regions. It reveals the effects that porous residential buildings have on the natural ventilation performance and, consequently, the cooling load reduction. Two residential building models, namely a model with a void ratio of 0% and a model with a void ratio of 50%, are evaluated using computational fluid dynamics (CFD) analysis and thermal and airflow network analysis. The analysis on components of the heat load indicates that improvements in the natural ventilation performance would significantly reduce the cooling load.