Immunomodulatory Properties and Osteogenic Activity of Polyetheretherketone Coated with Titanate Nanonetwork Structures

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.     

Site‐Selective Iron(III) Chloride‐Catalyzed Arylation of 4‐Aryl‐4‐methoxy‐2,5‐cyclohexadienones for the Synthesis of Polyarylated Phenols

The iron(III) chloride‐catalyzed Friedel–Crafts arylation of 4‐aryl‐4‐methoxy‐2,5‐cyclohexadienones, which were easily prepared by the phenyliodine(III) diacetate (PIDA)‐mediated oxidation of 4‐arylphenols in methanol, proceeded site‐selectively to form meta‐terphenyl (2,4‐diarylphenol) derivatives in good yields. The subsequent PIDA‐mediated oxidation and iron(III) chloride‐catalyzed Friedel–Crafts arylation of the resulting products gave the corresponding 2,4,6‐triarylphenol derivatives. The present method provides useful highly substituted polyarylated compounds.

     

Synthesis and electrocatalytic oxygen reduction activity of graphene-supported Pt3Co and Pt3Cr alloy nanoparticles

Graphene-supported Pt and Pt₃M (M = Co and Cr) alloy nanoparticles are prepared by ethylene glycol reduction method and characterized with X-ray diffraction and transmission electron microscopy. X-ray diffraction depicted the face-centered cubic structure of Pt in the prepared materials. Electron microscopic images show the high dispersion of metallic nanoparticles on graphene sheets. Electrocatalytic activity and stability of the materials is investigated by rotating-disk electrode voltammetry. Oxygen reduction activity of the Pt₃M/graphene is found to be 3–4 times higher than that of Pt/graphene. In addition, Pt₃M/graphene electrodes exhibited overpotential 45–70 mV lower than that of Pt/graphene. The high catalytic performance of Pt₃M alloys is ascribed to the inhibition of formation of (hydr) oxy species on Pt surface by the alloying elements. The fuel cell performance of the catalysts is tested at 353 K and 1 atm. Maximum power densities of 790, 875, and 985 mW/cm² are observed with graphene-supported Pt, Pt₃Co, and Pt₃Cr cathodes, respectively. The enhanced electrocatalytic performance of the Pt₃M/graphene (M = Co and Cr) compared to that of Pt/graphene makes them a viable alternative to the extant cathodes for energy conversion device applications.     

Recoverable shear strain of liquid crystal‐forming concentrated hydroxypropyl cellulose solutions

The recoverable shear strain (S_R) for the liquid crystal‐forming hydroxypropyl cellulose solutions was determined by means of a concentric cylinder rotational apparatus as functions of shear stress prior to recovery and concentration of the solutions at 30°C. S_R greatly depended on shear stress and concentration; the phase of the solution (the single phase or biphase) governed the dependences of S_R on stress and concentration. S_R increased with increasing stress for the single phase and decreased for the biphase. S_R seemed to be related to the die swell (B): S_R ∝ Bⁿ. S_R exhibited a maximum and a minimum with respect to concentration. S_R for the cellulosic cholesteric liquid crystalline solutions was greater than that for the isotropic solutions. A model was proposed for explaining the greater S_R. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 865–872, 2002     

Enhancing oil repellency of electron beam-grafted polyethylene terephthalate fabric with 2-(perfluorohexyl) ethyl acrylate monomer via pre-irradiation

Electron beam (EB)-induced graft polymerization is advantageous for the surface modification of fabrics. We investigated the effect of monomer concentration and the addition of alkyl groups on the oil repellency of polyethylene terephthalate (PET) fabrics treated with monomers containing fluoroalkyl groups through EB-induced graft polymerization via pre-irradiation. We use 2-(perfluorohexyl) ethyl acrylate (FEA) and stearyl acrylate (SA(C18)) with long alkyl chains as vinyl monomers to induce reaction with radicals generated from EB irradiation. The weight gain and surface morphology of the PET fabrics change with the FEA monomer concentration. The uniformity of the EB-grafted PET fabric surface is determined at low monomer solution concentrations. Results of X-ray photoelectron spectroscopy analysis show that adding 0.1 mol/L of FEA monomer to the EB-grafted PET fabric yields the highest dodecane contact angle of 93.4° and a surface fluorine concentration of 39.8%. The addition of SA(C18) monomer to the FEA monomer decreases the dodecane contact angle by 77.5° and yields a surface fluorine concentration of 19.1%. EB graft polymerization via pre-irradiation results in a uniformly treated surface, and stable oil repellency is achieved when using solely the FEA monomer at a lower monomer concentration than that used in a similar irradiation method reportedly previously.     

TRANSPORT PROPERTIES OF CELLULAR FOOD MATERIALS UNDERGOING FREEZE-DRYING

The samples of sliced and mashed apples were freeze-dried by controlling their surface temperatures over the usual pressure range of commercial operations. The surface of sliced samples could not be maintained at above 10°C in order to prevent the frozen layer from melting, while that of mashed samples was allowed to heat up to 70°C.

Thermal conductivities and permeabilities were determined by applying the uniformly-retreating-ice front model to the dried layer of the samples undergoing freeze-drying. The values of permeability for the mashed samples were found to depend on the ice-crystallization time during freezing. The results indicated that the drying rate of sliced samples was limited by the transfer rate of water vapor flowing through the dried layer. A cellular structural model is proposed for predicting the permeability of the dried layer, based on the resistance of the cell membrane to molecular transfer of water vapor.     

Pilot-Scale Operation of a Concrete Sludge Recycling Plant and Simultaneous Production of Calcium Carbonate

A pilot-scale plant to treat concrete sludge and produce calcium carbonate (CaCO₃) and an environmental purification agent (phosphorus adsorbent derived from concrete sludge, PAdeCS®) was designed, constructed, and operated. Concrete sludge from a concrete pile and pole production plant, boiler gas containing CO₂, and groundwater were used in the plant. The process involved calcium extraction from concrete sludge into water, followed by reaction of the calcium with CO₂ to produce crystalline CaCO₃. The pilot-scale plant was operated for 1 week, and the mass flows, conversion of CO₂ to CaCO₃, and net CO₂ emissions of the process were estimated. High-purity CaCO₃ (>97%) suitable for industrial use was obtained. Based on the power consumption of the process and the amount of CO₂ sequestered into CaCO₃, a net reduction in CO₂ emissions can be achieved using this process. The produced PAdeCS can be used as an inexpensive substitute for calcium series environmental purification agents.     

Application of Ni-free high nitrogen stainless steel for bipolar plates of proton exchange membrane fuel cells

Ni-free 23Cr-1N stainless steel was examined as bipolar plates for proton exchange membrane fuel cells. Corrosion resistance of the 23Cr-1N stainless steel was better relative to 22Cr stainless steel in the simulated cathodic environments. As confirmed by X-ray photoelectron spectroscopy, the polarized 22Cr and 23Cr-1N stainless steels at pH 2.3 presented predominantly chromium oxide in the outer passive layers. At pH 4.3, the passive layer of the polarized 22Cr stainless steel changed to iron oxides dominant. Interestingly, on the other hand, the polarized 23Cr-1N stainless steel preserved chromium oxide rich outer passive layer, which provides good corrosion resistance. As a result, although the initial cell voltage was slightly lower (∼40 mV), the 23Cr-1N stainless steel bipolar plates employing cell showed better cell voltage stability up to 1000 h, compared with the 22Cr stainless steel employing cell. The operation voltage became further higher through a surface modification of the 23Cr-1N stainless steel with TiN nanoparticles. It seems that the corrosion resistive Ni-free 23Cr-1N is possible to apply for bipolar plates of proton exchange membrane fuel cells.     

Pressure drop characteristics of flow in a symmetric channel with periodically expanded grooves

Pressure drop characteristics of flow in a periodically grooved channel are investigated experimentally. It is well known that a self-sustained oscillatory flow occurs from a steady-state flow at a certain critical Reynolds number in such grooved channels. The oscillatory flow enhances fluid mixing and leads to an increase in pressure drop. We measure the pressure drop with a pressure transducer. It is found that the pressure drop increases near the critical Reynolds numbers where the two- and three-dimensional oscillatory flows occur. In addition, the three-dimensional flow is confirmed by flow visualization.