基于Kanai-Tajimi模型的地震作用荷载新型识别方法

目的研究一种识别地震作用荷载的方法,为地震作用荷载的识别与相应结构的动力特性、损伤的识别提供一种新的途径,进一步为结构的安全性、损伤进程和耐久性等研究提供理论参考.方法利用Kanai-Tajimi模型将单位强度白噪声过程模拟为未知的地震作用,并将其作用在结构上,然后根据数值模拟计算得到的结构体系响应作为观测量,采用Kalman滤波对未知荷载状态加以识别.结果最终可以利用结构的加速度响应反演得出地震作用的等效荷载,在人工添加5%观测噪声的条件下,最大误差率为7%左右,而在人工添加10%观测噪声的条件下,最大误差率为8%左右.结论通过算例的验证,说明笔者所采用的方法精度较高,获得了较好的识别效果.     

全媒体时代新闻学专业实践教学模式的研究

全媒体时代,需要全媒体型新闻传播人才。新闻学专业教育者,要顺应时代要求,转变教育、教学观念,不断探索教学模式,加大实践教学内容比重,使课堂理论知识和实践教学环节相融合。营造多层次的实践平台,注重单项实践与综合实训相结合,增加"双师型"的教师比例,提高实践教学质量。     

基于MSP430单片机的灾害性天气预警管理系统设计

设计了基于MSP430单片机的灾害性天气预警管理系统,针对常见的雨量、风速及温度自然因素实现实时的监测,并对数据进行分析和处理,设置出相应的警报等级,并能根据警报的等级控制相应的三路设备。     

Temperature stability and fracture toughness of Nd-Fe-B magnets

Temperature stability and toughness of magnets are very important properties especially for application in motor. In this paper, it is found that temperature stability and toughness of magnets are improved when Fe is substituted with Co andheavy rare earth is substituted for Nd in part and suitable rich B grain-boundary phase is added. In addition, heavy rare earth substitution decreases the remanence temperature coefficient greatly, but has a little effect on Curie temperature of the magnets, which is beneficial to Nd-Fe-B magnets for the application in motor.     

大截面板簧和稳定杆的热处理改进

合理选择淬火冷却介质和确定零件的材料产品质量取于受控状态和确保产品质量的提高。     

Formation and thermal stability of amorphous Ni-Mo-P alloys

The experimental researches on the chemical deposition of Ni-Mo-P amorphous alloys were carried out by adding Na2 MoO4 into acidic solutions. The optimum technology conditions were obtained by orthogonal design experiments. The structures and the relationship between compositions and their thermal stability were studied by energy spectrum (EC), scanning electron micrograph and X-ray diffraction spectrum. Compared with Ni-P amorphous alloys, the Ni-Mo-P amorphous alloys have high crystallization temperature and thermal stability, and the hardness reaches its peak when the annealing temperature is 500 ℃. With the increase of the heat treatment temperature, the surface morphology of the alloys changes.     

Sr对高铁Al-Si合金组织和性能的影响

研究了Sr元素（加入量分别为0．03％、0．06％、0．09％、0．12％和0．18％）对含Fe量为1．2％的ZL102合金的组织和性能的影响。研究发现，随着Sr元素的加入，合金中粗大的针状Fe相开始出现断裂分叉现象，同时针状Fe相的长度也随Sr元素加入量的增加而减小，但Sr对Fe相的针状形貌没有明显改变。随着Sr元素加入量逐渐增加，合金的抗拉强度和伸长率均呈现出先增后减的变化趋势。当Sr元素加入量达到0．12％时，合金材料的综合力学性能最佳。     

Performance of positive and negative electrodes in amorphous manganese oxide supercapacitor

Using potassium permanganate and acetic manganese as the reactants, amorphous manganese oxide was prepared with mechanochemical method. XRD was used for microstructure characterization, while cyclic voltammetry and constant current charge-discharge were used for electrochemical performance testing. The positive electrode （PE） and negative electrode （NE） were investigated respectively in amorphous manganese oxide supercapacitor, aiming to find their different performances in charging-discharging. The results show that the crystalline structure is destroyed in both the PE and NE material during charge-discharge process. Thereinto, the NE suffers a bit more seriously. When cycling, the PE potential scope diminishes while the NE potential scope enlarges. The increased inner resistance makes the NE curves almost bended to be a right angle, but not the PE curves. The cell＇s equivalent series resistance （ESR） is more dependent on the NE, and the capacitance is mainly determined by the rapid descent of the NE potential range. The capacitances of the NE are highly rate-dependent, decreasing from 121.3 to 53.1 F/g, by 56.2%, over the range of 5-25 mV/s. However, the PE appears to be weakly dependent and its capacitance is only dropped by 22.1%.