Development and evaluation of a new Eu/SmPd3 source for use with Gd Mössbauer spectroscopy

A ¹⁵⁵Eu/¹⁵⁴SmPd₃ (about 231 MBq) source for use with ¹⁵⁵Gd Mössbauer spectroscopy was developed by a novel method. In the novel method, the isotopically enriched ¹⁵⁴SmPd₃ compound was prepared by the conventional solid state reaction of ¹⁵⁴Sm(HCOO)₃ and PdH_x in a hydrogen atmosphere at 1273 K for 18 h, which is simpler than the previously reported method. In order to increase the reaction areas, palladium fine particles used to synthesize the PdH_x hydride were prepared by a chemical solution process. Performance of the newly developed source was evaluated by observing the ¹⁵⁵Gd Mössbauer spectra of known compounds, GdPd₃ and cubic Gd₂O₃ at 12 K. The obtained results indicated that the developed source is fine enough to investigate the structural characteristic of various materials containing gadolinium.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

利用超长寿命快堆嬗变亚锕元素的特性研究

对利用超长寿命快堆（ＵＬＬＦＢＲ）嬗变高放核废物亚锕元素（ＡＭｓ）的堆芯物理特性进行了初步分析,得出了在ＵＬＬＦＢＲ中适当布置ＡＭｓ,既可以嬗变ＭＡｓ,又可改善超长寿命反应堆的物理特性这一结论。     

Microstructure of ion-implanted region in TiNi alloy

TiNi alloy samples implanted with various fluences of 3 MeV Cu²⁺ ions were characterized by transmission electron microscope (TEM) and X-ray diffractometer. Cross-sectional TEM images of the samples showed that amorphous region was seen at the fluence of 10¹⁴ ions cm^?2 in case of ion implantation at 300 K of the substrate temperature, but in case of ion implantation at 100 K it did not appear even at 10¹⁵ ions cm^?2. These results were also confirmed by X-ray diffraction profiles of the same samples. Consequently, the extent of microstructure change of TiNi alloy by ion implantation was different depending on the substrate temperature.     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Structural determination of subsidiary colors in commercial Food Green No. 3 (fast green FCF, FD & C Green No. 3).

HPLC analysis revealed that eight subsidiary colors existed in commercial Food Green No. 3 (fast green FCF, FD & C Green No. 3). Among them, four subsidiary colors C, F, G, and H were isolated by using preparative HPLC and their structures were determined by MS and NMR. They were the disodium salt of 2-[[4-[N-ethyl-N-(3- sulfophenylmethyl)amino]phenyl][4-[N-ethyl-N-(4- sulfophenylmethyl)amino]phenyl]methylio]-4-hydroxybenzenesulfonic acid (abbreviated as m,p-G-3), the sodium salt of 2-[[(4-N-ethylamino)phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)amino]-phenyl]methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(EA) (m-EBASA)], the sodium salt of 2-[[(4-N-diethylamino)phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)amino]phenyl]-methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(di-EA) (m-EBASA)], and the sodium salt of 2-[[4-[N-ethyl-N-(phenylmethyl)amino]phenyl][4-[N-ethyl-N-(3- sulfophenylmethyl)-amino]phenyl]methylio]-4-hydroxybenzenesulfonic acid [abbreviated as HSBA-(EBA)(m-EBASA)], respectively. HSBA-(di-EA) (m-EBASA) was a subsidiary color newly found in commercial Food Green No. 3.     

Kinetic resolution of an indan derivative using Bacillus sp. SUI-12: synthesis of a key intermediate of the melatonin receptor agonist TAK-375

The chiral indan derivative (S)-2 (2-[(8S)-1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl]ethyl-amine) was synthesized by enzyme-catalyzed asymmetric hydrolysis of the racemic acetamide 1 (N-[2-(1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl)ethyl]acetamide). The reaction was carried out using Bacillus sp. SUI-12 screened for the ability to hydrolyze 1 to give (S)-2 with high enantioselectivity. In a scaled-up experiment, a low reaction rate was observed. However, by changing the culture medium and the reaction conditions, it became possible to run the reaction to 40% conversion on a 10-g or more scale, obtaining (S)-2 at >;99% enantiomeric excess (ee). The (S)-2 obtained was available for the synthesis of the melatonin receptor agonist TAK-375 (N-[2-[(8S)-1,6,7,8-tetrahydro-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide).     

Impact of the gate-drain overlapped device (GOLD) for deepsubmicrometer VLSI

The gate-drain overlapped device (GOLD) structure is proposed to achieve high reliability and high performance in deep submicrometer MOSFETs. The GOLD device concept is different from that of drain-engineering methods such as the double-diffused drain (DDD) and lightly doped drain (LDD). GOLD eliminates the tradeoff between transconductance and breakdown voltage (hot-carrier, drain sustaining). The overlap effect of the GOLD devices is discussed using simulation and experiment. GOLD has a gate structure using a native oxide film (5-10 A) to obtain an overlapped fine structure. The process is also compatible with conventional LDD processes and is suitable for 0.3-0.5-μm-design-rule devices at 5-V operation, and 3-V operation     

Isolation and structural analysis of efficient autonomously replicating sequences (ARSs) of the yeast Candida utilis

The industrially important yeast Candida utilis is widely used in production of food and medical materials, but its host-vector system has not been well developed. We screened for compact and efficient ARSs to construct practically useful vectors. The C. utilis strain AHU3053 was found to be efficiently transformed by the conventional lithium acetate method and was used as the host. The C. utilis IAM4264 genomic library was constructed by inserting the partial Sau3AI digests in pRI51, which has a kanMX gene expressible in C. utilis. By examining 98 C. utilis G418-resistant transformants, five plasmids had the highest ARS activity. By trimming of the inserts, the 1490 and 552 bp fragments with transformation activity of over 10(3)/microg DNA were obtained from ARS3 and ARS4, respectively. Although several sequences identical to S. cerevisiae ARS consensus sequences (ACSs) were found in ARS3 and ARS4, our deletion analysis indicated that these were not essential for the activity. Because the minimal functional ARS fragment was also several-fold larger than that of S. cerevisiae, the C. utilis ARSs have some unique characteristics resembling the Sz. pombe ARSs. These ARSs were functional in other C. utilis strains tested and useful for constructing practical vectors.