A Two‐Stage Stochastic Mixed‐Integer Programming Approach to the Smart House Scheduling Problem

A “smart house” is a highly energy‐optimized house equipped with photovoltaic (PV) systems, electric battery systems, fuel cell (FC) cogeneration systems, electric vehicles (EVs), and so on. Smart houses are attracting much attention recently because of their enhanced ability to save energy by making full use of renewable energy and by achieving power grid stability despite an increased power draw for installed PV systems. Yet running a smart house's power system, with its multiple power sources and power storages, is no simple task. In this paper, we consider the problem of power scheduling for a smart house with a PV system, an FC cogeneration system, and an EV. We formulate the problem as a mixed‐integer programming problem, and then extend it to a stochastic programming problem involving recourse costs to cope with uncertain electricity demand, heat demand, and PV power generation. Using our method, we seek to achieve the optimal power schedule running at the minimum expected operation cost. We present some results of numerical experiments with data on real‐life demands and PV power generation to show the effectiveness of our method. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(4): 48–58, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22336     

Effect of Vacuum Heat Treatment on Electron-Beam-Irradiation-Cured Polycarbosilane Fibers

Electron-beam-cured polycarbosilane fibers were heat-treated at 673–1773 K in a tube evacuated to 1.3 × 10⁻¹ Pa and then exposed at 1873 K in argon. The effect of vacuum heat treatment on improving the high-temperature stability of low-oxygen SiC fibers was investigated by examining gas evolution, grain growth, surface composition, tensile strength, and morphology. The fibers heat-treated at <1173 K lost strength, because of the vigorous generation of residual hydrogen. A minute amount of oxygen in the atmosphere caused the active oxidation of SiC during heat treatment at >1673 K, resulting in severe strength degradation for the as-heat-treated fibers. Vacuum heat treatment at 1573 K provided the best characteristics in low-oxygen SiC fibers.     

W-type hexaferrite nanoparticles: A consideration for microwave attenuation at wide frequency band of 0.5-10 GHz

The static and dynamic magnetic properties of W-type hexaferrites are tuned to meet the requirements of wide band frequencies for attenuation of electromagnetic interference and microwave absorptions purposes. For this purpose, the W-type hexaferrite of entirely new composition of BaCoZnFe_16−2yAl_yCe_yO₂₇ (y = 0, 0.2, 0.4, 0.6, 0.8 and 1.0) has been synthesized by the chemical co-precipitation. The material is characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The complex permittivity (?_r = ?′ − j?″) and permeability (μ_r = μ′ − jμ″) spectra are determined using Vector Network Analyzer (VNA) in a range from 0.5 GHz to 10 GHz. During this study, it is noticeable that the Al³⁺ and Ce³⁺ ions have considerable effect on the shape of the nanoparticles. Samples having Al-Ce contents y = 0.2 and y = 0.4 showed large values for magnetization (70.5 emu/g) and remanent magnetization (32.9 emu/g). In addition, more than 99% absorption (>−20 dB) is noted for this sample composition. Based on these results it is concluded that the microwave absorption characteristics of these compounds can be tuned for the required frequency by varying the thickness of the absorber. Due to this reason, potential employment of the synthesized nanoparticles for absorption of electromagnetic radiations at wide frequency band of 0.5-10 GHz has been proposed.     

Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding

Metallurgical and Materials Transactions A - This study examines strain distribution occurring in the high-pressure sliding (HPS) processing for rods of pure Al and an AZ61 alloy. The strain...     

A New Laser Induced Incandescence–Mass Spectrometric Analyzer (LII-MS) for Online Measurement of Aerosol Composition Classified by Black Carbon Mixing State

We developed a laser induced incandescence–mass spectrometric analyzer (LII-MS) for online measurements quantifying the aerosol chemical compositions with respect to the mixing state of black carbon (BC). The LII-MS is developed as a tandem series comprising an LII chamber to detect and vaporize BC-containing particles and a particle trap laser desorption mass spectrometer (PT-LDMS: Takegawa et al. 2012). The PT-LDMS collects aerosol particles transferred from the LII chamber and quantifies the chemical compositions. A newly designed collection probe, coupled with the sheath-air inlet nozzle of the LII chamber, enables a high throughput of aerosol particles without significant dilution. Total aerosol particles can be analyzed in the PT-LDMS by turning off the laser (MS mode), and the aerosol particles externally mixed with BC can be analyzed by turning on the laser (LII-MS mode). The difference in the PT-LDMS signals between the MS and LII-MS modes yields the chemical composition of materials internally mixed with BC. Performance of the developed instrument was evaluated in the laboratory by generating BC particles internally-mixed with oleic acid (OL) and BC particles externally mixed with ammonium sulfate particles. Preliminary results from ambient measurements are also presented and discussed.

Copyright 2014 American Association for Aerosol Research     

Molecular Hydrogen Enhances Proliferation of Cancer Cells That Exhibit Potent Mitochondrial Unfolded Protein Response

Molecular hydrogen ameliorates pathological states in a variety of human diseases, animal models, and cell models, but the effects of hydrogen on cancer have been rarely reported. In addition, the molecular mechanisms underlying the effects of hydrogen remain mostly unelucidated. We found that hydrogen enhances proliferation of four out of seven human cancer cell lines (the responders). The proliferation-promoting effects were not correlated with basal levels of cellular reactive oxygen species. Expression profiling of the seven cells showed that the responders have higher gene expression of mitochondrial electron transport chain (ETC) molecules than the non-responders. In addition, the responders have higher mitochondrial mass, higher mitochondrial superoxide, higher mitochondrial membrane potential, and higher mitochondrial spare respiratory capacity than the non-responders. In the responders, hydrogen provoked mitochondrial unfolded protein response (mtUPR). Suppression of cell proliferation by rotenone, an inhibitor of mitochondrial ETC complex I, was rescued by hydrogen in the responders. Hydrogen triggers mtUPR and induces cell proliferation in cancer cells that have high basal and spare mitochondrial ETC activities.     

利用超长寿命快堆嬗变亚锕元素的特性研究

对利用超长寿命快堆（ＵＬＬＦＢＲ）嬗变高放核废物亚锕元素（ＡＭｓ）的堆芯物理特性进行了初步分析,得出了在ＵＬＬＦＢＲ中适当布置ＡＭｓ,既可以嬗变ＭＡｓ,又可改善超长寿命反应堆的物理特性这一结论。     

Relationship between electron sensitivity and chemical structures of polymers as electron beam resists. VI: Electron sensitivity of various acetalized poly(vinyl alcohol)s

Acetalized poly(vinyl alcohol)s which were synthesized from poly(vinyl alcohol) (PVA) and aldehyde or ketone were evaluated as electron beam (EB) resists, in order to investigate the relationship between EB sensitivity and chemical structures of the polymers. It was found that the acetalized PVAs were easily crosslinked by EB exposure. The main mechanism of crosslinking may be radical reaction at acetal group. The sensitivity of the acetalized PVA depended on the structure of the acetal group. Acetalized PVAs synthesized from benzaldehyde, in which the electron attracting group was substituted on the benzene ring and from linear aliphatic aldehyde having a long alkyl chain, had high sensitivity. A high sensitivity of 7.2 × 10⁻⁷ C/cm² was attained when the acetalized PVA synthesized from p-chloro-benzaldehyde was used. Acetalized PVAs synthesized from PVA and aldehyde having a cyclic structure had an excellent dry etching durability and were suitable as negative EB resists.     

Photoacoustic Spectroscopy of Some Energetic Materials

To find an effective laser source to ignite energetic materials, the absorption spectra of some energetic materials are obtained by means of a photoacoustic spectroscopy (PAS). In this experiment, PAS covers the wavelength region of 400 nm-1600 nm in which no other conventional method can take absorption spectra for powdered energetic materials. Photoacoustic spectra of 18 energetic materials are reported. In general, energetic materials tested showed peaks in 600 nm–800 nm and 1400 nm–1600 nm ranges. It is found that the energy required to initiate explosives in the case of ruby laser initiation were correlated with their photoacoustic signal intensities.