AC side harmonic and phenomena accompanying DC-injection of utility-interactive PV system

The experiments investigated phenomena related to direct contact between the DC output of a PV array and the AC power from the utility grid. The results show that the DC power flows through the distribution transformers (DC-injection) saturating their magnetic circuits. The saturation of magnetic circuits makes peak currents, incorporating a large portion of even harmonics, flow through the high-voltage side of the distribution transformer, adding the level of harmonic distortion of its exciting current. With the increase of injecting DC-current to the utility grid, peak currents at the primary side of distribution transformer increases the most, and even among the same effective (rms) values, the increase of primary side current is larger than that of the secondary side current.     

Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer

We demonstrated that the stability of organic solar cells (OSCs) under light irradiation is markedly enhanced by inserting a molybdenum trioxide (MoO₃) buffer layer between an anode layer of indium tin oxide (ITO) and a p-type layer of 5,10,15,20-tetraphenylporphyrin (H₂TPP) or N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (α-NPD). The use of the MoO₃ layer also enhanced open-circuit voltages and power conversion efficiencies of the OSCs due to an increase in built-in potential. From results of stability test of hole-only α-NPD devices, we concluded that the OSC degradation occurs near the ITO/p-type layer interface and that the use of the MoO₃ layer can prevent the degradation at this interface.     

Strain-mediated phase control and electrolyte-gating of electron-doped manganites

A prototype Mott transistor, the electric double layer transistor with a strained CaMnO(3) thin film, is fabricated. As predicted by the strain phase diagram of electron-doped manganite films, the device with the compressively strained CaMnO(3) exhibits an immense conductivity modulation upon applying a tiny gate voltage of 2 V.     

Development of a chirped pulse amplification laser with zigzag slab Nd:glass amplifiers dedicated to x-ray laser research

A chirped pulse amplification laser with zigzag slab Nd:glass amplifiers dedicated to x-ray laser research is described. The laser provides a 1.6 ps duration pulse with approximately 7 J energy at a repetition rate of 0.1 Hz. In the power amplifier system, laser light is amplified in a two-step manner: The first step is image-relayed multipass amplification up to approximately 1 J with a 10 mm x 10 mm beam. The second step is double-pass amplification up to >10 J with a 10 mm x 90 mm beam. By using this laser system, the saturated amplification of the Ni-like Ag laser at a wavelength of 13.9 nm has been successfully demonstrated.     

Random-coiled conformation of polypeptide chains

Summary Random-coiled conformation of poly(L-leucine), which has -branched side-chain, was theoretically analyzed by a conformational energy calculation based on intra-residue interactions. Calculated characteristic ratio 7.62 was obtained by using the transformation matrix statistically averaged over the entire side-chain conformational space of L-Leu residue. This value is smaller than those of poly(L-phenylalanine) (11.24) and poly(L-tyrosine) (12.33) which have -branched side-chain.     

Selective vapor phase hydroformylation of ethylene over cluster-derived cobalt catalyst

Vapor phase hydroformylation of ethylene was studied with silica-supported metal catalysts. A cobalt metal catalyst derived from Co₂(CO)₈ gave propanal and its derivatives in as high selectivity of about 36% as Rh/SiO₂ catalyst under the reaction conditions of 1.1 MPa of a gas-mixture of ArCOC₂H₄H₂ = 1333 at 423–503 K. On the other hand, conventional cobalt catalysts derived from cobalt nitrate, chloride, or acetate, and other noble metal catalysts (Pd/SiO₂ and Ir/SiO₂) produced mainly ethane.     

Construction of a robot control system which understands a voice and pointing actions

This research was aimed at making a robot that can go and get an object designated by the user. We produced a robot control system that uses pointing and voice control. This control system is composed of two systems. One system is the object instruction system that uses pointing, and the other is the object instruction system that uses voice. The approximate position of a designated object is recognized by the object instruction system that uses pointing, and information about the object and instructions about the operation are conveyed by the object instruction system that uses voice. This time, the object instruction system that uses pointing has been designed and verified as the first step. A calculation resource to calculate the approximate position of the designated object is obtained when the user points directly at the object. A robot can be moved around a designated object by using this system. The object instruction system that uses voice will be constructed in future work.     

OPTIMIZATION OF MATERIAL COMPOSITION OF FUNCTIONALLY GRADED PLATE FOR THERMAL STRESS RELAXATION USING A GENETIC ALGORITHM

In this article, a genetic algorithm is applied to an optimization problem of material composition for a plate of step-formed functionally graded materials. The step-formed functionally graded plate is analyzed as a laminated composite plate made of numerous layers with homogeneous and different isotropic material properties. First, the onedimensional transient temperature distribution for a laminated plate is analyzed theoret ically. In addition, the thermal stress components for such an infinitely long plate are formulated under the mechanical condition of being traction-free. As a numerical example, a plate composed of zirconium oxide and titanium alloy is considered. In addition, for the optimization problem of minimizing the thermal stress distribution, the numerical calculations are made using a genetic algorithm without supposing a distribution function of material composition and the optimal material composition of each layer is determined taking into account the effect of the temperature dependency of material properties. Furthermore, the results obtained when a distribution function isn't specified and the results found when a distribution function is specified are compared.