Kinetics and reaction scheme of coal liquefaction over molten tin catalyst

Rates of formation of gases, oils, asphaltenes and preasphaltenes during non-solvent liquefaction of coal over molten tin catalyst have been measured. A probable reaction scheme and the rate constants for the pathways comprising the scheme have been presented. The results show that the catalyst greatly accelerates the conversion of preasphaltenes to asphaltenes. It also accelerates two other reactions, i.e., coal to preasphaltenes and coal to asphaltenes. By contrast, the catalyst does little to promote gasification and formation of oils.     

Anhydrous proton conductor consisting of pectin–inorganic composite material

An organic–inorganic proton conductive composite material consisting of a biopolymer was prepared by mixing the pectin, tetraethyl titanate, and imidazole. Although the pectin material without the composite dissolved in water, the pectin–inorganic composite material did not show water solubility. In addition, in the composite material, the pectin and imidazole formed an acid–base structure by an electrostatic interaction, and as a result, these composite materials showed a thermal stability at intermediate temperatures (100–200°C). Furthermore, these composite materials indicated the proton conductivity of 5.6 × 10^?4 S cm^?1 at 180°C under anhydrous conditions. The activation energy of the proton conduction under anhydrous conditions was 0.32–0.22 eV and these values were one order of magnitude higher than that of the typical humidified perfluorinated membrane, such as Nafion^®. The organic–inorganic composite material consisting of a biocomponent may have the potential to be utilized as a novel proton conductor under anhydrous conditions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42433.     

Synthesis of charge transporting block copolymers containing 2,7-dimethoxycarbazole units for light emitting device

The block copolymers consisting of 2,7-dimethoxycarbazole- and oxadiazole-containing segments as hole and electron transporting units, respectively, were synthesized by NMRP manner. OLED devices were fabricated using block copolymer, random copolymer, and polymer blend for matrix of the emitting layer with Ir(ppy)₃ as a phosphorescent dopant in order to investigate morphological effect on the performance. From the finding that the block copolymer system overwhelmed the others in EQE, we assumed that a morphology with dimethoxycarbazole units assembled to the surface of PEDOT:PSS played a considerable role for effective recombination of charges as well as sufficient charge injection into the emitting layer.     

Control of island formation on silicon surfaces using ultra-high-vacuum scanning electron microscopy

In situ scanning electron microscopy has been used to control Au island formation on a patterned Si(111) surface with a periodic array of atomic-step bunches and holes. Liquid phase Au-Si islands were observed to redistribute on the patterned surface by annealing. The islands accumulate at a particular position of the step bunch in each pattern unit. This phenomenon is interpreted in terms of the energetic stability of a droplet on a patterned surface.     

Effects of excess K+ on carbachol-induced contractions in the guinea-pig tracheal muscle

1. In smooth muscles isolated from the guinea-pig trachea, the effects of dihydropyridines, nifedipine and nicardipine on contractions produced by carbachol (Cch) were studied in normal (6 mM) and excess K+ concentration (60 mM). The tonic contraction produced by 1 microM Cch was highly dependent on the external Ca2+ concentration ([Ca2+]0) and was not significantly affected by cyclopiazonic acid or thapsigargin, Ca2+ uptake inhibitor. 2. [Ca2+]0-tension curves were steeper in the presence of 1 microM Cch (the Hill coefficient: 2.5) than in the presence of 60 mM K+ (Hill coefficient: 1.6) and their ED50 of Ca2+ was 0.16 and 0.39 mM, respectively. An increase of K+ to 60 mM in the presence of 1 microM Cch shifted the curve to the left roughly in parallel (ED50: 0.12 mM, Hill coefficient: 2.3). 3. [Ca2+]0-tension curve in the presence of 1 microM Cch was shifted to the right in parallel by nifedipine (1 microM). This was markedly potentiated by 60 mM K+ (the increase in ED50 of Ca2+ being 3 times at 6 mM and 15 times at 60 mM K+). No tension was evoked by Ca2+ up to 2.5 mM in 60 mM K+ solution containing 1 microM nifedipine but no Cch. 4. In the absence of nifedipine, Cch-induced contractions were potentiated by 60 mM K+, whereas in the presence of nifedipine, Cch-induced contractions were markedly inhibited by 60 mM K+. These mechanical changes were accompanied by an increase or a decrease in intracellular Ca2+. 5. A hypothesis is presented to explain the results which suggests that the kinetics of Ca2+ influx though a single type of pathway is modulated by membrane potential and receptor activation and that the susceptibility of the pathway to dihydropyridine blockade is closely related to the Ca2+ influx kinetics with receptor activation reducing and membrane depolarization increasing the susceptibility.     

Lipase production in two-step fed-batch culture of organic solvent-tolerant Pseudomonas aeruginosa LST-03

Efficient lipase production by two-step fed-batch culture of an organic solvent-tolerant bacterium, Pseudomonas aeruginosa LST-03, was investigated. When FB synthetic medium was used in flask culture, no lipase activity was detected, whereas lipase was produced at 2.3 I.U./ml in C2 complex medium. However, lipase production was induced in FB medium when a fatty acid was added to the culture broth in the stationary phase. Among fatty acids tested, long chain saturated fatty acids, such as C18 (stearic acid) and C20 (arachidic acid), were found to function as effective inducers for the production of lipase, giving an activity level almost the same as that obtained in C2 medium in flask culture. Two-step lipase production, comprised of a growth phase in fed-batch mode and a production phase in which lipase was induced by the addition of 5% (v/v) stearic acid, was carried out in a jar-fermentor. In the growth phase, the maximum cell concentration at 16 h was only 20 in terms of the optical density at 660 nm (OD660), and a low level of lipase production (8 I.U./ml) was obtained after 167 h. This was considered to be due to the exhaustion of several medium components brought about by the use of an unsuitable medium or feeding solution. After analyzing the contents of the compounds in the culture broth by inductively coupled plasma spectrometry for metal ions and HPLC for anions, a modified FB medium was designed. When this modified FB medium was used in two-step fed-batch culture, the maximum cell concentration reached an OD660 of 55 (30.2 g-dry cells/l) at 16.5 h, and lipase was produced at 96 I.U./ml after 35 h, which is approximately 40 times higher than the production level obtained in flask culture using C2 medium.     

Studies on anti-inflammatory agents. V. Synthesis and pharmacological properties of 3-(difluoromethyl)-1-(4-methoxyphenyl)-5- [4-(methylsulfinyl)phenyl]pyrazole and related compounds

A series of novel 1,5-diphenylpyrazole derivatives bearing hydrophilic substituents was prepared. The anti-inflammatory and analgesic activities of these compounds were evaluated by using the adjuvant arthritis and Randall-Selitto assays in rats, and the structure-activity relationships were studied. The optimal compound was 3-(difluoromethyl)-1-(4-methoxyphenyl)-5-[4-(methylsulfinyl)phenyl]pyraz ole (10) with oral ED50 values of 0.31 and 2.6 mg/kg on adjuvant-induced arthritis and carrageenin-induced foot edema, respectively. Compound 10 showed analgesic activities not only toward inflamed paw but also toward normal paw (ED30 = 0.55 and 1.8 mg/kg, respectively) in the Randall-Selitto assay, and moreover, 10 was effective in the tail-pinch assay (ED50 = 21 mg/kg) similarly to morphine. The asymmetric synthesis and pharmacological properties of the enantiomers of 10 are also reported.     

Simulation of migration from a multi-layer laminated film intended for retort foods

Migration from multi-layer laminated film pouches intended for retort foods was investigated through HPLC analysis with a fluorescence detector, and measurements of residue on evaporation, consumption of potassium permanganate and total organic carbon. HPLC analysis revealed that the levels of migrants in oil and the water which were heated in the pouches (121 degrees C, 30 min) were ten times of those in the corresponding official simulants under the official conditions; n-heptane (25 degrees C, 60 min), and water (95 degrees C, 30 min). Bisphenol A diglycidyl ether and related compounds were found in the oil and the water heated in the pouches, as well as in the simulants. These compounds were thought to have been present in the adhesive between the laminated films, and migrated through the food-contact film of the package. Consumption of potassium permanganate and residue on evaporation of the heated water were ten times of those of the water simulant, while the total organic carbon level of the heated water was several-hold greater than that of the water simulant. In addition, migrant levels per surface area of the pouch were one-fourth of the concentrations per content volume of the pouch. Since compliance with the legal limits is evaluated based on the concentration per surface area, real migration into foods would be underestimated by a factor of another four.     

Development of a novel aptamer-based sensing system using atomic force microscopy

Atomic force microscopy (AFM) can dynamically detect the adhesion or affinity force between a sample surface and a cantilever. This feature is useful as a detection method using aptamers--single-strand DNA that recognizes its target with very high affinity. The present study proposes a novel DNA aptamer-based sensing system using AFM. In this study, thrombin was chosen as the target molecule, and a DNA aptamer-based AFM sensing system based on competition was developed. The affinity force between the gold chip and the cantilever decreased as the concentration of thrombin increased. Moreover, a low detection limit of 0.2 nM was achieved. Therefore, the AFM sensing system used would be appropriate for the measurement of various chemical compounds.