Bias-stress-induced increase in parasitic resistance of InP-based InAlAs/InGaAs HEMTs

The reliability of InP-based HEMTs is studied, focussing on how it is affected by the doped layer material and gate recess structure. Bias-and-temperature stress tests reveal that fluorine-induced donor passivation in the recess region, formed adjacent to the gate electrode, causes the source resistance (R_s) to increase at large drain bias voltages. The increase in R_s can be prevented by using InP or InAlP as the carrier supply layer material instead of InAlAs. On the other hand, the increase in the drain resistance (R_d) does not depend on the material of the carrier supply layer, which suggests that a mechanism different from that in the case of R_s should be considered. It is also found that a deep gate recess suppresses the increase in R_d after long-term stressing.     

Development of a single loop EPR test method and its relation to grain boundary microchemistry for alloy 600

A single loop electrochemical potentiokinetic reactivation test method has been developed for alloy 600 that produces good passivation on all the surfaces, good etching during the reactivation scan and no appreciable pitting. It is able to quantify and discriminate between samples with a wide range of degree of sensitization. The Pa value correlates well with the minimum level of chromium in the depletion regions at the grain boundaries. It has been shown that the width of the attacked regions is much larger than the width of chromium depletion regions and it does not show any direct correlation with either depth or width or with a volume parameter of chromium depletion regions. It has been shown that the chromium carbides are not attacked during the test and that the intragranular regions attacked during the test are the sites of chromium carbides in the grain matrix. A modified Pa parameter is shown to be sensitive down to 7.5 wt% chromium in the depletion regions and indicates that the intragranular carbides have shallower depletion profiles than those at grain boundaries. Comparison of the results of the single loop and the double loop tests showed a good correlation.     

High density recording with perpendicular Co-Cr-Nb media and ring heads

Effective double layer structure was investigated by adding Nb to the sputtering source of Co-Cr thin film perpendicular magnetic recording tapes. The output from the tapes was measured with a ring head through to the short wavelength, λ50=0.19 μm (D50=267KFRPI).     

Hydroliquefaction of low-sulfur coals using iron carbonyl complexes—Sulfur as catalysts

Hydroliquefaction of low-sulfur Australian coals (Wandoan and Yallourn) was studied using iron carbonyl complexes as catalyst. The addition of Fe(CO)₅ (2.8 wt% Fe of coal) increased coal conversion from 48.6 to 85.2% for Wandoan coal, and from 36.7 to 69.7% for Yallourn coal in 1-methylnaphthalene at 425°C under an initial hydrogen pressure of 50 kg cm^?2. When molecular sulfur was added to iron carbonyls (Fe(CO)₅, Fe₂(CO)₉ and Fe₃(CO)₁₂), higher coal converions ( > 92%) and higher oil yields (>46%) were obtained, along with an increase in the amount of hydrogen transferred to coal from the gas phase (0.2 to 2.8%, d.a.f. coal basis). In the liquefaction studies using a hydrogen donor solvent, tetralin, Fe(CO)₅S catalyst increased the amount of hydrogen absorbed from the gaseous phase and decreased the amount of naphthalene dehydrogenated from tetralin. The direct hydrogen transfer reaction from molecular hydrogen to coal fragment radicals seems to be a major reaction pathway. Organic sulfur compounds, dimethyldisulfide and benzothiophene, and inorganic FeS₂ and NiS were found to be good sulfur sources to Fe(CO)₅. From X-ray diffraction analyses of liquefaction residues, it is concluded that Fe(CO)₅ was converted into pyrrhotite (Fe_1?xS) when sulfur was present, but into Fe₃O₄ in the absence of sulfur.     

Relationship between local immune response to Helicobacter pylori and the diversity of disease: investigation of H. pylori-specific IgA in gastric juice

In order to evaluate the relationship between local immune response to Helicobacter pylori and the diversity of disease, 77 asymptomatic subjects who underwent a health examination were studied. Helicobacter pylori-specific IgG in serum and H. pylori-specific IgA in gastric juice were measured by ELISA, and the measured IgA titre was classified into two grades, low or high. Histological classification of gastritis was performed according to the Sydney system. Cytokines in gastric juice were also measured, and the cytotoxin-associated gene A (cagA) status of H. pylori was tested by PCR. Of the 65 subjects who were positive for H. pylori-specific IgG in serum, 38 (58.5%) were classified as H. pylori-specific IgA low titre in gastric juice and 27 (41.5%) had high titres. In the IgG-positive, IgA-low group, the rate of peptic ulcers (especially duodenal ulcers) in endoscopic findings was higher (P < 0.05); the score of activity and the density of H. pylori were higher (P < 0.001 and P < 0.05, respectively); the score of metaplasia was lower (P < 0.05); and the level of interleukin-1 beta was lower (P < 0.05) than in the IgG-positive, IgA-high group. The positive rate of the cagA gene was 84.4% and there was no significant difference between the two groups. There were differences in endoscopic and histological findings between the IgG-positive, IgA-low and the IgG-positive, IgA-high groups. It is suggested that persons infected with H. pylori can be divided into two different states of disease according to local immune response.     

Physiological functions and regulation of K+ and Cl- channels in single smooth muscle cells

Solution- and solid-state c.d. spectra, as well as surface energetics values, were collected for a series of peptides derived from human salivary proline-rich glycoprotein (PRG). The acronyms and sequences for these peptides are as follows: PRG9-2 = NH2-G(1)-P(2)-CONH2, PRG9-3 = NH2-G(1)-P(2)-P(3)-CONH2, PRG9-4 = NH2-G(1)-P(2)-P(3)-P(4)-CONH2, PRG9-5 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-CONH2, PRG9-6 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-CONH2, PRG9-7 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-CONH2, PRG9-8 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-K(8)-CONH2, and PRG9-9 = NH2-G(1)-P(2)-P(3)-P(4)-H(5)-P(6)-G(7)-K(8)-P(9)-CONH2. The presence of stable poly-L-proline II-like 'mini' helices in the solution state was found to be dependent on peptide chain length, pH, salt, and organic solvent type. Other conformational features such as kinks and beta-/gamma-turns were also found in the larger peptides. Solid-state peptide conformations were not necessarily related to their solution-state counterparts. Poly-L-proline II-like 'mini' helices, kinks, and beta-/gamma-turns were similarly found in the various substrate-bound PRG9 peptides. Surface energetics parameters suggested specific orientations for PRG9 peptides and their constituent acids and homopolymers.     

Dural caroticocavernous fistula with both ophthalmic arteries arising from middle meningeal arteries

A 60-year-old woman presented with a dural caroticocavernous fistula (CCF) in whom both by ophthalmic arteries arose from the middle meningeal arteries instead of from the internal carotid arteries. Transarterial embolisation of the CCF was contraindicated because of the risk of blindness. Transvenous coil embolisation was therefore performed. Bilateral origin of the ophthalmic artery from the middle meningeal artery is extremely rare.     

An Electronic Approach to Materials Design

A molecular orbital approach to materials design has recently made great progress. This approach is based on the electronic structure calculations by the DV-Xα cluster method. In this paper recent progress in this approachis reviewed. In particular