Stability of metastable tetragonal ZrO2 in compound powders and nucleation arguments

ZrO₂-SiO₂ (11) mixtures and ZrO₂ particles were prepared by a sol-gel method from the solutions of ZrOCl₂·8H₂O (ZOC) + Si(OC₂H₅)₄ (TEOS) + C₂H₅OH and ZOC + C₂H₅OH + H₂O + NH₄Cl systems, respectively. Quantitative changes of phase crystallized by heating were compared with those of ZOC + TEOS + H₂O and/or ZrO(NO₃)₂ · 2H₂O + H₂O systems, respectively. The stability of metastable tetragonal (mt)-ZrO₂ particles depends on the Young's modulus of the SiO₂ matrix. Transition metal oxides existing on the interface assisted in stabilizing mt-ZrO₂. The order of the assistance agreed with that of the relative field strengths of their oxides. A relationship between the ionic radius and the volatility of anionic groups, and the difficulty of nucleation for the martensitic transformation accompanying a shear stress, is suggested.     

Preparation of γ-alumina thin membrane by sol-gel processing and its characterization by gas permeation

-alumina porous membranes without pinholes or cracks were prepared by the sol-gel process. The boehmite sol obtained from hydrolysation of aluminium isopropoxide was applied to the inner surface of a porous supporting tube by a dipping procedure. The effects of sol concentration and the repetition number of dipping-drying-firing procedure on the membrane performance were investigated by scanning electron microscopy, X-ray diffraction and the Brunauer-Emmett-Teller method in connection with the micro-structure of the membrane. Gas permeation measurements were also conducted. The gas permeation through the thin membranes is well explained by Knudsen's flow, indicating the pores are controlled finely and homogeneously.     

Effects of temperature and grain size on deformation and fracture in recrystallized Ni3Al doped with boron

The effects of temperature and grain size on the deformation and fracture behaviour of recrystallized Ni₃Al doped with boron were investigated by tensile tests at temperatures up to 973 K as a function of grain sizes from 1.6 to 105m. The yield stress showed a positive temperature dependence to a peak temperature in somewhat different manners depending on the grain size. For coarse-grained specimens, a rapid drop in elongation was observed with increasing temperature. The predominant fracture mode changed with temperature from the transgranular fracture of {1 1 1} cracking to brittle intergranular fracture. This embrittlement at elevated temperatures was considered to occur by a high stress concentration at grain boundaries arising from increased flow stress level and the occurrence of grain boundary sliding (GBS). In contrast, the elongation was not so markedly decreased with temperature for intermediate- and fine-grained specimens which exhibited ductile intergranular fracture and cavitation fracture, respectively, at elevated temperatures, and a slant-type fracture and cup-cone fracture, respectively, at low temperatures. The suppression of serious high-temperature embrittlement for intermediate-grained specimens was explained in terms of the slow propagation of a crack formed by GBS, owing to stress relaxation by dynamic recrystallization (DR) and plastic deformation. In the case of ultra-fine-grained specimens a large elongation was developed at elevated temperatures, which was interpreted as that the further occurrence of DR with increasing volume fraction of grain boundaries reduces the cavitation promoted by GBS, and that the limited sliding length due to extremely small grain diameter raises the stress for cavity formation.     

A novel quarter‐wave retardation film for improving viewing angle properties in time‐sequential stereoscopic 3D‐LCDs

We have successfully developed a quarter‐wave retardation film (QWF) for wide viewing angle 3D liquid crystal displays (3D‐LCDs) that provides high luminance, low crosstalk, low color change, and low head‐tilt‐angle dependency. It was found that the out‐of‐plane retardation (Rth) of the QWF in the LCD needs to be close to 0 nm in order to improve the 3D display properties at an off‐axis position and that the in‐plane retardation (Re) needs to be adjusted from 120 to 130 nm to achieve low color change with head tilting. We adopted a coating process for making our QWF because of its potential for retardation control. 3D‐LCDs with this QWF whose Rth was nearly zero had high performance and allowed off‐axis other than on‐axis.     

Constructive model-based analysis for safety assessment

The aerospace industry still uses fault trees to perform reliability analysis. This is because fault-tree modeling and analysis (FTA) seems easier to practical engineers when compared with Markov models, even though FTA provides a weaker form of analysis. In this paper, we propose an automatic strategy for generating Markov-based models and corresponding analysis formulations, according to ARP 4761, directly from Simulink diagrams annotated with failure information. The generated Markov-based models are expressed in the formal language PRISM, and the analysis is carried out by the PRISM model checker. The strategy is compositional and based on a comprehensive set of translation rules from Simulink to PRISM. We briefly address soundness and completeness of the rules and, to illustrate the application of the strategy, we apply it to a classical avionics case study: an actuator control system.     

"Pored-domes" of the fenestrated endotheliocyte of the glomerular and peritubular capillaries in the rodent kidney.

The fenestrated endotheliocyte of peritubular and glomerular capillaries in rat and mouse kidneys were observed with SEM and TEM. In the glomerular capillary, so-called "pored-domes" were found not only at the fenestrated areolae but also at the nuclear region of the endotheliocyte. At the region between filtration surface and nuclear region, they accumulated to construct a sponge-like structure. The endotheliocyte of peritubular capillary also showed small "pored-domes". The size and morphology of the pores in the "pored-domes" of glomerular and peritubular capillaries were similar to those of areolae fenestratae of the respective capillary. Based on the findings, we assumed that pored-domes and the sponge-like structure are the reservoir for the fenestrated area of the endotheliocyte to accommodate the rapid expansion of capillary lumen.     

An experimental study of the thermodynamic properties of 1,1-difluoroethane

Experimental vapor pressures andP--T data of an important alternative refrigerant, 1, 1-difluoroethane (HFC-152a), have been measured by means of a constant-volume method coupled with expansion procedures. SixtyP--T data were measured along eight isochores in a range of temperaturesT from 330 to 440 K, at pressuresP from 1.6 to 9.3 MPa, and at densities from 51 to 811 kg·m^–3. Forty-six vapor pressures were also measured at temperatures from 320 K to the critical temperature. The uncertainties of the temperature and pressure measurements are within ±7mK and ±2kPa, respectively, while the uncertainty of the density values is within ±0.1%. The purity of the sample used is 99.9 wt%. On the basis of the measurements along each isochore, five saturation points were determined and the critical pressure was determined by correlating the vapor-pressure measurements. The second and third virial coefficients for temperatures from 360 to 440 K have also been determined.     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Possibility of superconductivity with highT c in La-Sr-Nb-O system

We prepared La-Sr-Nb-O system samples both in bulk form and as a film, with sharp resistive transitions at temperatures of 228–323 K, depending on the annealing conditions. The sharp resistive transitions might be attributable to superconductivity. Magnetic ordering was observed over a narrow temperature range around 40 K for some of the samples.     

Autonomous Visual Measurement for Accurate Setting of Workpieces in Robotic Cells

This paper introduces a new method of adapting the virtual world of an offline programming model to an actual robotic cell by attaching a CCD camera to the robot. This method requires no specific camera attachment location or optical camera calibration. Furthermore, there is no operational requirement for setting robotic camera location. Robot motion is autonomously generated to identify the camera view line. The view line is adjusted to pass through the designated target point, utilizing visual feedback motion control. This method calibrates reference points between the virtual world of an offline model to an actual robotic cell.