Prediction-based realistic 3D model compression

The benefit of using the geometry image to represent an arbitrary 3D mesh is that the 3D mesh can be re-sampled as a completely regular structure and coded efficiently by common image compression methods. For geometry image-based 3D mesh compression, we need to code the normal-map images while coding geometry images to improve the subjective quality and realistic effects of the reconstructed model. In traditional methods, a geometry image and a normal-map image are coded independently. However a strong correlation exists between these two kinds of images, because both of them are generated from the same 3D mesh and share the same parameterization. In this paper we propose a predictive coding framework, in which the normal-map image is predicted based on the geometric correlation between them. Additionally we utilize the strong geometric correlation among three components of normal-map image to improve the predicting accuracy. The experimental results show the proposed coding framework improves the coding efficiency of normal-map image, meanwhile the realistic effect of a 3D mesh is significantly enhanced.     

基于无线传感器网络的水质监测系统设计

使用传统的有线水质监测系统进行水环境污染检测时,存在监测点数量多、监测时间长等问题。为此,提出一种基于无线传感器网络的水质监测系统。通过无线传感器节点对被监测水域进行水质参数的数据采集,将采集到的数据经过Zigbee网络进行汇总及处理,并经过GPRS网络及时地远程传送给监管部门,从而实现对河流水质情况的实时、有效的监督和管理。对水质监测系统的软硬件电路设计进行介绍,并实现对系统的软硬件连调。实验结果证明,该系统能够满足组网要求,可较好地应用于水质监测领域。     

Epitaxy growth and directed crystallization of high-density polyethylene in the oriented blends with isotactic polypropylene

Various lamellar orientations of high-density polyethylene (HDPE), due to competition between bulk nucleation and interfacial nucleation, have been realized in its melt drawn blends with isotactic polypropylene (iPP) upon cooling after subjected to 160 °C for 30 min. Directed crystallization, with heterogeneous nucleation in the bulk (within domains), is defined as lamellar growth along boundary of anisotropic domains and is favored in larger domains at higher temperature (slow cooling), since overgrowth of lamellae can feel the interface rather than impingement with neighbor ones as a result of scare nuclei at higher temperature. Moreover, lamellar growth caused by directed crystallization is dependent of dimension of confinement. Due to 2D confinement of cylindrical domains, lamellae can only grow along the axis of cylinder and thus b-axis orientation is formed. While in the layered domains with 1D confinement, however, lamellae grow with the normal of (110) plane along the melt drawn direction. On the other hand, epitaxial growth of HDPE chains onto iPP lamellae is related to the surface-induced crystallization and dominated by the interfacial nucleation. Only interfacial nucleation is preferred can epitaxial growth occur. Therefore, retarded crystallization, realized by either strong confinement in finer domains or rapid cooling or both, is favorable for it.     

Influence of polymerization conditions on the structure and properties of polyethylene/polypropylene in‐reactor alloy synthesized in the gas phase with a spherical Ziegler–Natta catalyst

A spherical TiCl₄/MgCl₂‐based catalyst was used in the synthesis of in‐reactor polyethylene/polypropylene alloys by polyethylene homopolymerization and subsequent homopolymerization of propylene in the gas phase. Different conditions in the ethylene homopolymerization stage, such as monomer pressure and polymerization temperature, were investigated, and their influences on the structure and properties of in‐reactor alloys were studied. Raising the polymerization temperature is the most effective way of speeding up polymerization and regulating the ethylene content of polyethylene (PE)/polypropylene (PP) alloys, but it will cause a greater increase in the PE‐b‐PP block copolymer fraction (named fraction D) than in the fraction of PP‐block‐PE in which the PP segments have low or medium isotacticity (named fraction A). Although changing ethylene monomer pressure could influence the ethylene content of PE/PP alloys slightly, it is an effective way of regulating the structural distribution. Reducing the monomer pressure will evidently increase fractions A and D. The mechanical properties of the alloys, including impact strength and flexural modulus, can be regulated in a broad range with changes in polymerization conditions. These properties are highly dependent on the amount, distribution, and chain structure of fractions A and D. The impact strength is affected by both fraction A and fraction D in a complicated way, whereas the flexural modulus is mainly determined by the amount of fraction A. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2136–2143, 2006     

Graft copolymerization of styrene onto casein initiated by potassium diperiodatonickelate (IV) in alkaline medium

A novel redox system, potassium diperiodatonickelate (Ni(IV))‐casein is used to initiate graft copolymerization of Styrene onto casein under different conditions in aqueous alkaline solution. Graft copolymers with both high grafting efficiency (>98%) and percentage of grafting(>300%) are obtained, which indicated that (Ni(IV))‐casein redox pair is an efficient initiator for this grafting. The effects of reaction parameters, such as monomer‐to‐casein weight ratio, initiator concentration, pH, time, and temperature, are investigated. A tentative initiation mechanism is proposed. The structures and properties of the graft copolymer are characterized by Fourier transform infrared Spectroscopy, X‐ray diffraction diagrams, and Scanning Electron Microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4247–4251, 2006     

《抱朴子》反义词的判定与类型

参酌各家之说确定了判定反义词的原则和对反义词的统计方法,并从词性和反义词概念间的关系两个不同的角度对《抱朴子》中的反义词进行了分类,从而加深了对反义词性质和作用的了解。     

Synthesis and self-assembly of comb oligomers having rigid racemic or chiral binaphthyl macrocyclic pendant groups

In this article, we described the synthesis of comb oligomers having rigid racemic or chiral binaphthyl macrocyclic pendant groups via the free radical polymerization. Oligomers obtained were well characterized by MALDI-TOF-MS, ¹H NMR, FT-IR, UV, CD and SEC. These comb oligomers having macrocyclic pendant groups showed very good solubility in common organic solvents at room temperature. Furthermore, the oligomers could self-assemble into different morphologies by dropping their THF solutions of different concentrations on the surface of water. At a relatively low concentration, the oligomers self-aggregated into hollow spheres. When the concentration was increased, the aggregates changed into solid spheres. The morphologies of the hollow or solid spheres were observed by TEM and ESEM.     

基于JMY-502模块的IC卡读写器的设计

随着非接触IC的大量使用,其成本越来越低。可以用单片机和IC读写模块来设计IC卡读写器,读写器分两种,一种是连接微机的,主要应用在收费管理部门,另一种是应用于现场收费部门,一般只具有自动收费功能。介绍了一种基于JMY-502的IC卡读卡器的设计,JMY-502是PHILIPS公司生产的微型嵌入式非接触式IC卡读写模块。给出了两种读卡器的硬件原理图及程序框图,读卡器实现了射频卡的制卡、收费及充值等功能,设计方案简单、成本低,适合各种收费场合。     

IWSNs中的混合式共享链路调度

针对工业无线传感器网络中的链路调度问题,提出一种混合式共享链路调度方案.通过对现有典型集中式调度方案存在的不足进行分析,将属于同一路径或多跳路由的节点间的共享链路集中分配给属于同一路径的节点,采用分布式决策决定哪些节点应当在每个时间点使用共享链路;推导出描述调度方案的可靠性和延迟性能指标的解析表达式,表明提出方案能灵活分配和利用链路,具有更好的防止传输差错和减小延迟的能力.仿真结果表明,与现有IWSNs链路调度方案相比,提出方案可以提高可靠性和延迟性能,更有效地利用链路资源.