Increasing the efficiency of metal-air current sources operating in a pulse-train mode

A considerable (～1.4-fold) increase in the average output power of a chemical current source has been achieved by means of a periodic pulsed manipulation of the load. A scheme used for the pulse-train loading is presented and mechanisms ensuring an increase in the average output power of the current source are considered.     

Properties of gasars-metallic materials with pores formed by released hydrogen

We developed a new type of porous materials with anisotropic structure based on a large number of metals. It is shown that these material, called gasars, have properties different from the properties of the other porous materials. Thus, the strength of gasars is much higher than the strength of powder materials with the same porosity and their impact toughness is readily regulated by the sizes of the pores. The internal structures of gasars and possible versions of the types of pores in these materials are strongly diversified, which makes the spectrum of their possible applications very wide. We discuss some specific directions of the potential applications of gasars. The results of measurements of the thermal conductivity of gasars and monolithic specimens are presented. It is shown that, for a certain level of porosity, the specific thermal conductivity of gasars is higher than for monolithic materials. We also make some basic conclusions concerning the characteristics of new porous materials. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 125–127, September–October, 2007.     

Converting harmonic oscillations into chaos

A new simple model of a system with chaotic dynamics, based on the equations of bistable systems, is considered. The possibility of converting harmonic signals into chaotic oscillations, which represent intermittent irregular and switching quasi-regular motions, is demonstrated by numerical methods. The mechanism of chaotization is analyzed using the results of numerical calculations.     

Propagation of strain waves and compaction of a viscoelastic material by a cylinder rolling over it

This paper considers problems on the rolling of rigid driven and driving cylinders slipping on a compactible viscoelastic base. As a result of the investigation of the process of propagation of viscoelastic decaying strain waves in a deformable medium caused by a cylinder rolling over it and the action of the sliding friction forces, formulas and calculation algorithms have been obtained for determining the indices of the stressed-strained state and compactness of the base, the rolling resistance of the driven and diving cylinders, and the driving force of the driving cylinder. Calculations of these indices have been performed for the cases of cylinders rolling over a soil whose viscoelastic properties have been investigated experimentally. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 5, pp. 122–132, September–October, 2007.     

A threshold temperature effect for a carbon particle heated in plasma

Numerical simulations of the heating of a carbon dust particle (pellet) in hydrogen plasma showed that the character of heating depends in a threshold manner on the initial temperature of the pellet. The heating proceeds at a high rate if the initial temperature is above a certain threshold (“hot” regime), and at a much lower rate for an initial temperature below this threshold (“cold” regime). An important factor in this process is thermionic emission, which leads to positive charging of a pellet in hydrogen plasma due to electron emission from the surface in the hot regime. In the cold regime, the pellet acquires a negative charge that retards the electron flux from plasma to the particle. A method for the experimental observation of this effect is proposed.     

The structure and thermo EMF of a nanotubular carbon deposit formed in electric discharge plasma

We have studied the structure and thermo emf of a nanotubular carbon deposit formed in electric arc discharge plasma. The deposit contains flocky granules with dimensions of 15–20 μm within a 20–60 μm-thick layer on the substrate surface. This deposit is characterized by a sufficiently high thermo emf (60 μV/K) and electric conductivity (600 Ω⁻¹ m⁻¹).     

The Influence of Ir and Pt Addition on the Synthesis of Fullerenes at Atmospheric Pressure

The addition of metallic Ir and Pt to a fullerene-forming, atmospheric-pressure plasma reactor was found to influence the generation of carbonaceous products. It was observed that the added metals were efficiently dispersed into the plasma and that their presence increased the yield of fullerenes. The addition of Ir led to a noticeable shift in the fullerene distribution towards C₆₀, whereas the addition of Pt increased the proportion of C₆₀ oxides and decreased the proportion of higher fullerenes. Addition of Ir also caused a reduction of the soot particle size and the formation of a considerable quantity of carbon nanotubes.     

Discrimination of B–C–N nanotubes through energy-filtering electron microscopy

Various multi-walled nanotubes in the B–C–N system are thoroughly investigated using a JEOL-3100FEF high-resolution field emission transmission electron microscope operating at 300 kV and equipped with an in-column built Omega filter. Spatially-resolved B, C and N elemental maps of the nanotubes are constructed. It is realized that a wide variety of tubular arrays composed of B, C and N atoms may exist in the system. Sandwich-like BN-rich and C-rich alternating tubular shells, graphitic C layers inside and outside of pure BN shells induced either by surface contamination, or electron beam irradiation, separation of C-rich and BN-rich tubes and/or BN particles within tubular bunches may take place. One should carefully take these effects into account while analyzing nanotube physical properties, e.g., electrical or optical, rather than simply rely on electron energy loss spectra typically collected from B, C and N containing nanostructures as a whole. Striking dependence of an individual nanotube electrical conductivity on tubular shell chemistry is demonstrated using I–V curve recording in an atomic force microscope.     

A personal computer based system used in electromyography for interpretation and reporting

Programs for rule based electromyography (EMG) interpretation and reporting are described. A number of parameters are obtained during an EMG investigation. The combination of these data leads to a neurophysiological conclusion. Knowledge from the literature, research and experience is the basis for rule development. Rules have been developed for 14 of the most commonly used classifications of an EMG. The syntax is relatively easy and the user may change the rules, add rules or apply the system for other types of data. The results are displayed in a new graphical way. The system presented here is part of an integrated EMG laboratory with administrative routines, distributed databases for storage of results and routines for automatic report generation.     

High-gain pseudomorphic InGaAs base ballistic hot-electron device

A high-gain ballistic hot-electron device is described. The GaAs-AlGaAs heterostructure device, with a 21-mm-thick pseudomorphic In _0.12Ga_0.88As base, had a current gain of 27 at 77 K and 41 at 4.2 K. As characteristically seen in ballistic devices, transfer into the L valley limited the maximum gain. The Γ-L valley separation in the strained In_0.12Ga_0.88As was estimated to be about 380 meV