Effect of sintering on the microstructure and mechanical properties of alloy titanium-wollastonite composite fabricated by powder injection moulding process

Composite biomaterials are in high demand in the medical field of today. The combination of bioactive wollastonite (WA) glass ceramic with the biocompatibility of alloy titanium (Ti6Al4V) could be a good candidate for implant applications. The rheological properties of Ti6Al4V/WA feedstock show a pseudoplastic behaviour with low activation energy. The feedstock was successfully injected as a green part with no defects. The green part was solvent debound for 6?h in heptane and thermal debound in an argon environment for 1?h. The brown part was successfully sintered at 1300?°C for 3?h with 5?°C/min heating and cooling rates. The average sintered density was 4.12?g/cm³; which is 97.5% from the theoretical density. The highest Young's modulus obtained was 18.10?GPa; which is in the range of human bone strength. EDX analysis shows that by increasing sintering temperature, the level of oxygen decreased. Cell viability test shown an absorbance increased with days increasing indicated that the cellular were proliferated on the composite Ti6Al4V/WA composite which also proved that the composite was non-toxic. This indicates that the Ti6Al4V/WA composite is suitable for bone implant applications.     

Nonsimilar solution of a boundary layer flow of a Reiner–Philippoff fluid with nonlinear thermal convection

The thermodynamics modeling of a Reiner–Philippoff-type fluid is essential because it is a complex fluid with three distinct probable modifications. This fluid model can be modified to describe a shear-thinning, Newtonian, or shear-thickening fluid under varied viscoelastic conditions. This study constructs a mathematical model that describes a boundary layer flow of a Reiner–Philippoff fluid with nonlinear radiative heat flux and temperature- and concentration-induced buoyancy force. The dynamical model follows the usual conservation laws and is reduced through a nonsimilar group of transformations. The resulting equations are solved using a spectral-based local linearization method, and the accuracy of the numerical results is validated through the grid dependence and convergence tests. Detailed analyses of the effects of specific thermophysical parameters are presented through tables and graphs. The study reveals, among other results, that the buoyancy force, solute and thermal expansion coefficients, and thermal radiation increase the overall wall drag, heat, and mass fluxes. Furthermore, the study shows that amplifying the space and temperature-dependent heat source parameters allows fluid particles to lose their cohesive force and, consequently, maximize flow and heat transfer.     

Nanomaterials for Antiangiogenic Therapies for Cancer: A Promising Tool for Personalized Medicine

Angiogenesis is one of the hallmarks of cancer. Several studies have shown that vascular endothelium growth factor (VEGF) plays a leading role in angiogenesis progression. Antiangiogenic medication has gained substantial recognition and is commonly administered in many forms of human cancer, leading to a rising interest in cancer therapy. However, this treatment method can lead to a deteriorating outcome of resistance, invasion, distant metastasis, and overall survival relative to its cytotoxicity. Furthermore, there are significant obstacles in tracking the efficacy of antiangiogenic treatments by incorporating positive biomarkers into clinical settings. These shortcomings underline the essential need to identify additional angiogenic inhibitors that target numerous angiogenic factors or to develop a new method for drug delivery of current inhibitors. The great benefits of nanoparticles are their potential, based on their specific properties, to be effective mechanisms that concentrate on the biological system and control various important functions. Among various therapeutic approaches, nanotechnology has emerged as a new strategy for treating different cancer types. This article attempts to demonstrate the huge potential for targeted nanoparticles and their molecular imaging applications. Notably, several nanoparticles have been developed and engineered to demonstrate antiangiogenic features. This nanomedicine could effectively treat a number of cancers using antiangiogenic therapies as an alternative approach. We also discuss the latest antiangiogenic and nanotherapeutic strategies and highlight tumor vessels and their microenvironments.     

Hemodialysis‐related headache

Headache is one of the most frequently encountered neurological symptoms during hemodialysis. According to International Classification of Headache criteria dialysis‐related headache was defined as the headache occurring during hemodialysis with no specific characteristic. It resolves spontaneously within 72 hours after the hemodialysis session ends. There are few studies in the literature investigating the clinical features of dialysis headache. The pathophysiology of hemodialysis‐related headache is not known, but various triggering factors have been identified, including changes in blood pressure, serum sodium and magnesium levels during hemodialysis sessions, caffeine deprivation and stress. The aim of this article is to evaluate and analyze features of headache in patients undergoing hemodialysis.     

Preparation of photo curable highly hydrophobic coatings using a modified castor oil derivative as a sol-gel component

Modification and use of natural products have gained a lot of interest in recent years due to their environmental friendliness and their availability from different sources. In this study castor oil based photo curable highly hydrophobic coatings were prepared and characterized. Castor oil (CO) was first modified with 3-isocyanato propyl triethoxy silane and then it was hydrolyzed prior to the coating preparation. The resulting precursor was mixed with norbornyl acrylate, hexane diol diacrylate and hydrophobic coatings were prepared with the aid of fluorinated and nonfluorinated alkoxy silane coupling agents. The addition of fluorine showed a significant impact on the properties of the coatings. As the fluorine content was increased in the formulations, flame retardancy and the contact angle values of the coatings increased. The highest amount of fluorine containing coating showed a contact angle of 119°. Then with the addition of nonfluorinated alkoxysilane compounds, a contact angle of 130° was reached. Also the effect of post-cure temperature on contact angle values was investigated.     

Automatically tuned boring bar system

This paper introduces a boring bar system which includes an automatically tuned internal vibration absorber, called a tuned mass damper (TMD). The TMD head can be attached to boring bars with a wide range of lengths. An electromagnetic impulse force actuator is developed to measure the frequency response function (FRF) of the boring bar with an integrated power screw. A portable servo motor is attached to the power screw for adaptive tuning of the vibration damper's stiffness. The measurement and tuning cycle is automated until the negative real part of the FRF is optimized to maximize the chatter-free depth of cut. The system is experimentally validated on boring bars with a wide range of length to diameter ratios.     

Synthesis and properties of cross‐linked polymers from epoxidized rubber seed oil and triethylenetetramine

A series of epoxidized oils were prepared from rubber seed, soybean, jatropha, palm, and coconut oils. The epoxy content varied from 0.03 to 7.4 wt %, in accordance with the degree of unsaturation of the oils (lowest for coconut, highest for rubber seed oil). Bulk polymerization/curing of the epoxidized oils with triethylenetetramine (in the absence of a catalyst) was carried out in a batch setup (1 : 1 molar ratio of epoxide to primary amine groups, 100°C, 100 rpm, 30 min) followed by casting of the mixture in a steel mold (180°C, 200 bar, 21 h) and this resulted in cross‐linked resins. The effect of relevant pressing conditions such as time, temperature, pressure, and molar ratio of the epoxide and primary amine groups was investigated and modeled using multivariable nonlinear regression. Good agreement between experimental data and model were obtained. The rubber seed oil‐derived polymer has a T_g of 11.1°C, a tensile strength of 1.72 MPa, and strain at break of 182%. These values are slightly higher than for commercial epoxidized soybean oil (T_g of 6.9°C, tensile strength of 1.11 MPa, and strain at break of 145.7%). However, the comparison highlights the potential for these novel resins to be used at industrial/commercial level. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42591.