A new method for cross-calibration of two satellite sensors

Given that many operational satellite sensors are not calibrated, while a handful of research sensors are, cross-calibration between the two types of sensor is a cost-effective means of calibration. A new method of sensor cross-calibration is demonstrated here using the Chinese Multi-channel Visible Infrared Scanning radiometer (MVIRS) and the US Moderate Resolution Imaging Spectrometer (MODIS). MVIRS has six channels, equivalent to the current National Oceanic and Atmospheric Administration's (NOAA) Advanced Very High Resolution Radiometer (AVHRR) and four additional ones for remote sensing of ocean colour and moisture. The MVIRS on-board China's polar-orbiting meteorological satellite (FY-1D) was launched on 15 May 2002 with an earlier overpass time than Terra. The sensor has no on-board calibration assembly. This study attempts to calibrate MVIRS against the well-calibrated MODIS, by taking a series of measures to account for their differences. Clear-sky measurements made from the two sensors in July-October 2002 were first collocated. Using the 6S radiative transfer model, MODIS reflectances measured at the top-of-the atmosphere were converted into surface reflectances. They were corrected to the viewing geometry of the MVIRS using the bidirectional reflectance distribution function (BRDF) measured on the ground. The spectral response functions of the two sensors were employed to account for spectral discrepancies. After these corrections, very close linear correlations were found between radiances estimated from the MODIS and the digital readings from the MVIRS, from which the calibration gains were derived. The gains differ considerably from the pre-launch values and are subject to degradation over time. The calibration accuracy is estimated to be less than 5%, which is compatible to that obtained by the more expensive vicarious calibration approach.     

Applicability of time-of-flight-based ground and multispectral aerial imaging for grapevine canopy vigour monitoring under direct root-zone deficit irrigation

ABSTRACT

This study investigates the applicability of ground-based 3D time-of-flight (ToF) imaging and small unmanned aerial system (UAS) integrated multispectral imaging as a rapid grapevine canopy vigour mapping tool for decision support during crop production management. Direct root-zone deficit irrigation was applied to grapevines with continuous and pulse irrigation techniques at 15%, 30%, and 60% rates as that of standard irrigation rate (100%) established by the grower in a commercial production. The control block was irrigated continuously at 100% standard irrigation rate. Field plots were imaged using ground platform integrated with 3D ToF imaging sensor and small UAS-integrated multispectral camera at 128 and 65 days before the harvest to estimate the canopy vigour variability associated with irrigation treatments. Customized as well as standard methods (convex hull and voxel grid) were utilized to extract canopy attributes (e.g. volume) from the 3D ToF imaging sensor data. The multispectral images were processed to extract normalized and green normalized difference vegetation index images. Resulting data were used to estimate canopy area ratio i.e. the ratio between the grapevine canopy area with respect to the total area in selected region of interest. A significant correlation (r = 0.34) between canopy volume estimated by customized algorithm and aerial canopy area ratio was observed. Custom canopy volume estimates were also highly correlated (r = 0.79) with voxel grid derived canopy volume data. Overall, 60% continuous direct root zone deficit irrigation appeared to produce canopy volume/vigour comparable with those under control treatment. Results also suggest that grower can utilize either or both (ground and aerial) grapevine canopy mapping techniques for effective management.     

An investigation into the characteristics of non-linear frequency response functions. Part 2: New analysis methods based on symbolic expansions and graphical techniques

In Part 1 of this paper the concepts of input and output frequency subdomains were introduced to give insight into the relation between one dimensional and multi-dimensional frequency spaces. The visualisation of both magnitude and phase responses of third order generalized frequency response functions was also presented. In this, the second part, symbolic expansion techniques are introduced and together with the results achieved in Part 1, yield new methods for analysing the properties of generalized frequency response functions. Case studies are included to illustrate the application of the new methods.     

Integrated microfluidic drug delivery devices: a component view

Research on drug delivery devices is progressing rapidly with the main objective being the delivery of precise quantity of drugs into the target area of the body. A drug delivery device (DDD) needs to accurately control the flow rate of drug delivery and protects the body from undesired additional doses. An integrated microfluidic drug delivery device (IMDDD) is a miniature device that can regulate and monitor the delivery of the right amount of drug using micro-scale components. IMDDDs offer several advantages including ease of use, electro-chemical controllability, low power consumption, simplicity, fast fabrication, and good bio-compatibility. Various IMDDDs have been developed for treatment of cancer, cardiovascular disorder, eye and brain diseases, stress, and diabetes. This paper presents a generic architecture for IMDDDs, discusses the existing drug delivery methods, summarizes the specifications of the components, and identifies a number of performance evaluation parameters. The operation of IMDDDs is presented through fourteen potential internal components. In addition, recommendations on how enhance the design and fabrication process of IMDDDs are given.     

Analysis of an in-plane micro-generator with various microcoil shapes

This study presents an analysis of an in-plane micro-generator with various microcoil shapes and multiple aspects of coupling, and reports the fabrication of a prototype micro-generator. It is important to establish analytical solutions for the micro-generator to predict the induced voltage. These analytical solutions can be used to estimate the micro-generator power to reduce the experimental time and the cost. Understanding the physical meanings of the variables can optimize the structure of the micro-electromagnetic generator. This model considers electromagnetism, kinematics, and geometry. The proposed in-plane rotary electromagnetic micro-generator was fabricated using low-temperature co-fired ceramic technology to co-fire the silver microcoils on the ceramic substrate with different shaped coils (e.g., square-shaped, circle-shaped and sector-shaped) both with the printing linewidth and 100 μm spacing of these microcoils. A planar permanent magnet with an outer diameter of 9 mm and a thickness of 700 μm was sintered by Nd/Fe/B. Its residual induction is 1.4 T. The experimental data in this study can be compared with analytical solutions. Analytical results show that the micro-generator with a sector-shaped microcoil generates a maximum effective value of 218.127 mV induced voltage at 1395.34 rad/s. Experimental measurements show a close agreement with these analytical solutions.     

Free inductive K-semialgebras

We consider rational power series over an alphabet Σ with coefficients in a ordered commutative semiring K and characterize them as the free ordered semialgebras in various classes defined by the least pre-fixed point rule and its dual. The results are generalizations of Kozen’s axiomatization of regular languages.     

Mixture and non-mixture cure fraction models based on the generalized modified Weibull distribution with an application to gastric cancer data

The cure fraction models are usually used to model lifetime time data with long-term survivors. In the present article, we introduce a Bayesian analysis of the four-parameter generalized modified Weibull (GMW) distribution in presence of cure fraction, censored data and covariates. In order to include the proportion of “cured” patients, mixture and non-mixture formulation models are considered. To demonstrate the ability of using this model in the analysis of real data, we consider an application to data from patients with gastric adenocarcinoma. Inferences are obtained by using MCMC (Markov Chain Monte Carlo) methods.