热连轧冶金过程组织性能预报技术

本文简要介绍了热连轧冶金过程中组织性能预报技术的研究内容和研究方法以及该技术在工业生产中的应用和作用.     

Isothermal transformation of austenite in 55S2 steel

Metal Science and Heat Treatment -     

The kinetics of the corrosion of copper containing different amounts of oxygen in 1.7 M H2SO4

The rate of corrosion of rotating copper discs was measured as a function of the concentration of oxygen in metal. It was found that the catastrophic acceleration of the corrosion of the sample occurs at 3 × 10³ ppm of oxygen in metal. In the temperature range 5–75°C, the corrosion resulting from the presence of the oxygen in the metal occurs in the regime of activational control, and it is not influenced by the oxygen dissolved in the acid. The corrosion resulting from the oxygen depolarization occurs in the activational control regime in the temperature range 5–35°C, in the mixed kinetics regime in the range 45–55°C, and in the range 65–75°C in the diffusional regime with respect to the oxygen dissolved in the acid. The overall rate of corrosion of copper containing 8 × 10³ ppm of oxygen is about 20 times greater than the rate of corrosion of copper with oxygen depolarization.     

Effect of rhenium addition on isothermal oxidation behavior of single-crystal Ni-based superalloy

The isothermal oxidation behavior of a nickel-based superalloy, which we designate as DD32, containing 4 wt.% rhenium and another alloy (DD32M) without rhenium were investigated at 900, 1000 and 1100 °C. Oxidized alloys were characterized by SEM, EDX, EPMA and XRD. The two alloys revealed similar oxidation rates at 900 °C, while the DD32 alloy showed a slightly higher mass gain than that of the DD32M alloy during 1000 and 1100 °C exposure. Surface and cross-sectional examination indicated that DD32 alloy showed nonuniform oxidation between dendritic and interdendritic areas at all temperatures. Similar different oxidation behavior between dendritic and interdendritic regions was also observed in the DD32M alloy at 900 °C. However, DD32M showed relatively uniform oxidation at 1000 and 1100 °C exposure. Therefore, Re addition clearly induced the nonuniform oxidation of the alloy.     

The use of severe plastic deformation techniques in grain refinement

Severe plastic deformation (SPD) has emerged as a promising method to produce ultrafine-grained materials with attractive properties. Today, SPD techniques are rapidly developing and are on the verge of moving from lab-scale research into commercial production. This paper discusses new trends in the development of SPD techniques suchas high-pressure torsion and equal-channel angle pressing, as well as new alternative techniques for introducing SPD. The paper also contains a comparative analysis of SPD techniques in terms of their relative capabilities for grain refinement, enhancement of properties, and potential to economically produce ultrafine-grained metals and alloys. For more information, contact Terry C. Lowe, Science and Technology Base Programs, Los Alamos National Laboratory, Los Alamos, NM 87545; (505) 667-7824; fax (505) 665-3199; e-mail tlowe@lanl.gov.     

The inhibition of the dissolution of iron in sulfuric acid by halide ions

The dissolution rate of mild steel in 1 N H₂SO₄ without and with different additions of Cl^?, Br^? and I^? has been measured. Analysis of the results indicates that halide ions adsorbed on the metal surface inhibit the dissolution reaction. Adsorption occurs according to the Frumkin isotherm.