Measurement of the size, shape and orientation of convex bodies

Different types of solid bodies (particles) with specific shape and size are needed for industrial processes. For spherical particles, ‘sizer’ measurements are usually reported as sphere diameters. For non-spherical particles, particle shape and especially orientation must be taken into account. Particles of a specific shape will present different views when looked at from different directions.We have employed a Camsizer^® instrument to measure the distribution of projected area under different physical conditions for solid cylindrical particles:

•

Under ‘ideal’ conditions, corresponding to a uniform distribution of particle orientation, measurements agreed with predictions. The celebrated theorem of Cauchy applies only to this case.

•

For two other situations, measured and predicted results differed. However, from the experimental data it was possible to infer the particle orientations and hence theoretically predict the projected area distribution. Excellent agreement between theory and practice was then restored.

     

Sintering TiO2 in HCl Atmospheres

TiO₂ was sintered in HCl atmospheres to enhance the effects of vapor transport. Little or no densification is observed for temperatures between 1000° and 1300°C. Particle coarsening occurs at temperatures above 1200°C. The apparent activation energy for particle growth is 114 kJ/mol. It is concluded that the primary mass-transport mechanism is vapor transport while the particle growth rate is limited by grain-boundary mobility .     

Proton Conductivity Measurements in Yttrium Barium Cerate by Impedance Spectroscopy

Proton-conducting solid-electrolyte perovskite ceramics based on acceptor-doped barium and strontium cerates have become the focus of extensive investigations as candidate materials for fuel cells that operate at moderate temperatures. To assess the suitability of a material for this application, it is necessary that bulk electrolyte conductivity be measured at the operating temperature. However, very little reliable published conductivity data exist above 600°C. Protonic conductivity in yttrium-doped barium cerate has been observed to be less at high temperatures than would be expected, based on the activation energy and preexponential for hydrogen transport at temperatures <300°C. Conductivity data obtained from impedance spectroscopy on BaCe_0.9Y_0.1O_3–α over the extended temperature range of 100°–900°C are presented. An Arrhenius plot of the data shows two distinct linear regions, suggesting that two different rate-limiting processes occur in series with a break-over transition at ∼250°C. The decrease in conductivity is apparently not due to dehydration. An activation energy for protonic transport of 0.26 eV, about one-half of the low-temperature value, is proposed, based on curve fitting of the high-temperature data.     

Recovery of eicosapentaenoic acid from fungal mycelia by solvent extraction

Utilization of lipids containing eicosapentaenoic acid (EPA) produced by microorganisms requires processes for their efficient recovery from microbial cells. Recovery of EPA from mycelia of the fungusPythium irregulare by solvent extraction with hexane-isopropanol (HIP) in a pilot-plant colloid mill was investigated. Extraction efficiencies of 96% for lipid and EPA were achieved with a 3∶2 (vol/vol) HIP mixture by milling wet, filtered mycelia for 5 min at a solvent/dry solids ratio of 100 L/kg. The process yielded a crude extract that contained up to 96% lipid and an EPA content as high as 24% (with no selectivity for EPA).     

Effects of dietary fiber in Vervet monkeys fed “Western” diets

Male Vervet monkeys (7/treatment) were fed a “Western” diet containing 46.2% calories as fat, 39.8% as carbohydrate and 14.0% as protein. The diet was augmented with 10% cellulose or 10% pectin. A third (control) group of seven monkeys was fed a commercial ration augmented with fruit and bread. After 34 weeks, serum cholesterol levels were elevated significantly in the two test groups compared with the controls but there was no difference between the two fiber-fed groups. Serum triglycerides were unaffected. Liver cholesterol levels were the same in all three groups but liver triglyceride levels were lower in the monkeys fed cellulose. Biliary lipids were similar in all three groups as were the calculated lithogenic indices. The average aortic sudanophilia (percent of total area) in the three groups was cellulose, 10.6±2.5; pectin, 8.1±2.5; and control, 1.1±0.4. One animal in each of the groups fed “Western” diet exhibited an atherosclerotic plaque. The results indicate that there is no difference between pectin and cellulose with regard to their effects on either lipidemia or aortic sudanophilia in Vervet monkeys fed a Western-type diet.     

Retarding effects of DNA on the autoxidation of liposomal suspensions

Deoxyribonucleic acid (DNA) is associated with the cell membrane of prokaryotes and the inner nuclear membrane of eukaryotes. The unsaturated fatty acids of phospholipids, which constitute the bilaminar structure of membranes, undergo autoxidation in the presence of O₂. Calf thymus DNA was incubated with methyl archidonate-enriched phosphatidyl choline liposomes in order to study the effect of DNA upon the oxidation of phospholipids while present in their natural in vivo bilayer configuration. DNA retarded the rate of lipid oxidation and the TBA test, but it did not alter the induction period. These results suggest that DNA is scavenging free radicals produced within the phospholipid bilayer.     

Essentiality of dietary ω3 fatty acids for premature infants: Plasma and red blood cell fatty acid composition

Pre-term infants, that are not breast-fed, are deprived of vital intrauterine fat accretion during late pregnancy and must rely on formula to obtain fatty acids essential for normal development, particularly of the visual system. Preterm infants (30 wk postconception) receiving human milk were compared to infants given one of the following formulae: Formula A was a commercial preterm formula with predominantly 18∶2ω6 (24.2%) and low (0.5%) 18∶3ω3; Formula B was based on soy oil and contained similar 18∶2ω6 levels (20%) and high 18∶3ω3 (2.7%); Formula C was also a soy oil-based formula (20% 18∶2, 1.4% 18∶3) but was supplemented with marine oil to provide ω3 long-chain polyunsaturated fatty acids (LCP) at a level (docosahexaenoic acid, DHA, 0.35%) equivalent to human milk. At entry (10 days of age), the fatty acid composition of plasma and red blood cell (RBC) membrane lipids of the formula groups were identical. By 36 wk postconception, the DHA content in lipids of group A was significantly reduced compared to that in the human milk and marine oil formula groups. Omega-3 LCP results were further amplified by 57 wk with compensatory increases in 22∶5ω6 in both plasma and RBC lipids. Provision of 2.7% α-linolenic acid in formula group B was sufficient to maintain 22∶6ω3 levels equivalent to those in human milk-fed infants at 36 wk but not at 57 wk. Effects on the production of thiobarbituric acid reactive substances and fragility of RBC attributable to the marine oil supplementation were negligible. The results support the essentiality of ω3 fatty acids for preterm infants to obtain fatty acid profiles comparable to infants receiving human milk. Formula for preterm infants should be supplemented with ω3 fatty acids including LCP. Based on a paper presented at the Symposium on Milk Lipids held at the AOCS Annual Meeting, Baltimore, MD, April 1990.     

The use of electrochemical noise methods (ENM) to study thick, high impedance coatings

Thick, high impedance organic coatings are those class of coatings used to provide corrosion protection to naval vessels, pipelines, gasoline storage tanks, and other large structures such as bridges and plant structures. These coatings, especially the newest generations now being used in practice, can provide exceptional protection and lifetime of performance such that properly and accurately assessing and differentiating among competing coatings is a very difficult task. The standard protocol of salt fog testing (ASTM B117), immersion testing, and outdoor exposure in a corrosive environment with subjective evaluation of a coating's performance durings and after testing, does not adequatcly rank and predict coating lifetimes for new coating systems, especially for the environmentally compliant coating systems such as powder coatings (especially the thick, fusion bonded epoxy (FBE) coatings used for pipelines), two component epoxy and urethane coatings and waterborne coatings. New, objective test methods are desperately needed by users and manufacturers of coatings. A relatively new electrochemical test procedure, electrochemical noise methods (ENM), as developed by Skerry and Eden, has been shown in our laboratory to be very successful in the ranking and prediction of relative coating performance. We have used the method successfully on naval ship coatings, several pipeline coatings and other related systems, and Skerry has used them successfully on industrial maintenance coatings. We have used these methods in conjunction with electrochemical impedance spectroscopy, d.c. resistance measurements and cyclic salt fog testing of the Prohesion^TM type. In our studies of pipeline coatings, we needed to investigate thermal effects because of their extended range of use temperature. In these studies, we have discovered that electrochemical methods can be used for an in situ measurement of the T_g of coatings in electrolyte immersion. Further, the ‘plasticizing’ effect of aqueous electrolyte absorption as well as its relative irreversibility has been shown. For all coatings studied, ENM provided useful, objective, numerical data which rapidly ranks coatings and provides useful information on the relative lifetime prediction of coatings which may provide up to 30 years of service.     

Implementation of the quadrature method of moments in CFD codes for aggregation-breakage problems

In this work the quadrature method of moments (QMOM) is implemented in a commercial computational fluid dynamics (CFD) code (FLUENT) for modeling simultaneous aggregation and breakage. Turbulent and Brownian aggregation kernels are considered in combination with different breakage kernels (power law and exponential) and various daughter distribution functions (symmetric, erosion, uniform). CFD predictions are compared with experimental data taken from other work in the literature and conclusions about CPU time required for the simulations and the advantages of this approach are drawn.     

Numerical simulation of atomic layer deposition for thin deposit formation in a mesoporous substrate

ZnO deposition in porous γ-Al₂O₃ via atomic layer deposition (ALD) is the critical first step for the fabrication of zeolitic imidazolate framework membranes using the ligand-induced perm-selectivation process (Science, 361 (2018), 1008–1011). A detailed computational fluid dynamics (CFD) model of the ALD reactor is developed using a finite-volume-based code and validated. It accounts for the transport processes within the feeding system and reaction chamber. The simulated precursor spatiotemporal profiles assuming no ALD reaction were used as boundary conditions in modeling diethylzinc reaction/diffusion in porous γ-Al₂O₃, the predictions of which agreed with experimental electron microscopy measurements. Further simulations confirmed that the present deposition flux is much less than the upper limit of flux, below which the decoupling of reactor/substrate is an accurate assumption. The modeling approach demonstrated here allows for the design of ALD processes for thin-film membrane formation including the synthesis of metal–organic framework membranes.